How do you cover interior concrete steps with wood?
- Examine the concrete steps to ensure they are not too decayed.
- Measure the width and the depth of the concrete steps.
- Cut out a piece of plywood that can cover the length and width of your concrete step.
- Sand down the sides of the plywood to remove all rough edges and splinters.
How do you cover concrete steps?
How do you cover interior concrete steps with wood? Examine the concrete steps to ensure they are not too decayed. Measure the width and the depth of the concrete steps. Cut out a piece of plywood that can cover the length and width of your concrete step. Sand down the sides of the plywood to remove ...
How do you cover old concrete steps?
how to wrap front porch concrete stairs with wood. Find this Pin and more on outdoor living by 1 801-300-5384. How to Cover Concrete Steps with Wood landscaping update #landscaping #curbappeal #curbappealprojects #farmhouseporch. Jennifer Priest | Crafts + Craft Rooms, DIY Money Gifts, Recipes. J.
Can you put wood railing on concrete steps?
Jan 02, 2009 · Putting it right on the concrete would allow moisture to be in constant contact with the wood whenever the concrete is wet. That'll make it ugly faster and will speed up the deterioration of a wood that can last upwards of 50 years in good circumstances. My suggestion would be to demolish part of the concrete stairs and frame in wood stairs if ...
How to anchor wood stairs to concrete?
Mar 8, 2016 - Explore Stayc Gates's board "how to cover ugly concrete step/front of home" on Pinterest. See more ideas about concrete steps, house exterior, porch steps.
Step 1
Examine the concrete steps to ensure they are not too decayed. If the concrete steps are in disrepair, the wood may break along with the concrete steps. Replace the concrete steps if you find them riddled with cracks and other imperfections that may cause them to buckle.
Step 3
Cut out a piece of plywood that can cover the length and width of your concrete step. Use plywood that is 5/8 of an inch thick. Cut out several identical pieces to cover all the steps on your stairway.
Step 4
Sand down the sides of the plywood to remove all rough edges and splinters. This will give the edges a cleaner look that is more attractive.
Step 5
Drill two starter holes on each side of every plank of wood. Place them near the four corners of the plank. Drill the holes large enough for your cement bolts to fit securely.
Step 6
Place a plank of plywood on the top stair of the case. Insert cement bolts into each hole of the plank to anchor the wood to the cement step below. Continue installing the plywood in this manner down the entire staircase.
Step 7
Coat the plywood of the top stair with flooring adhesive. Before it has time to dry, start applying the slats of hardwood flooring to the glue surface. Set the wood slats as close to each other as possible until you cover the entire surface of the plywood.
Step 8
Place weights on top of the wood slats to help the glue bond. Leave the weights on for as long as it takes the wood to thoroughly dry. Continue attaching and weighing down the wood slats on all of the steps.
Introduction Of FinishStone Composite Panels
FinishStone composite panels. I don't think I'd want them over the whole exterior, but they might be nice over the concrete block foundation. On the other hand, do they look too much like mobile home underpinning?
Front Entry Fix-Up
Turn a dull concrete stoop into a showpiece by capping the treads and risers with stone. The risers can be clad in gray natural granite veneers. Other DIY capping options include clay Saltillo, split-brick, and limestone pavers.
What is stair tread cover?
Stair tread covers, or stair overlays, are handy products for improving the look and the slip resistance of existing stairs. Tread covers go right over the old step treads—the horizontal board that you walk on. Some covers also conceal the old step risers —the vertical boards between the treads. Overlays for slip resistance typically rest on top ...
What is a carpet stair cover?
Carpet stair treads or covers are slightly smaller than a standard stair tread and attach to the treads using hook-and-loop (Velcro) strips. Half of each strip is stuck to the tread; the other half is attached to the underside of the carpet tread.
What is laminate stair tread?
Laminate stair treads (and risers) are the engineered-wood version of hardwood stair cover systems. They offer a lower-cost alternative to hardwood with a similar look. Laminate systems often are sold in sets and may or may not include riser boards.
What is composite tread?
Composite tread covers are made of compression-molded fiberglass and resin. They cover the entire tread, including the nosing, to provide excellent slip-resistance. They can be installed over concrete, metal, or wood, using construction adhesive or screws.
What is a rubber stair mat?
Rubber stair mats are similar to the familiar heavy, perforated, rubber doormats but are sized for individual stair treads, and they have a more decorative look. Their primary purpose is to add slip-resistance to wet or icy outdoor stairs. They also work well for basement stairs, deck stairs, and garage steps.
What is the best material for stair treads?
Natural sisal is an excellent stair tread cover and has long been a favorite for its durability, skid resistance, and its ability to match with many stair colors and styles. Sisal is a hemp-like plant that's used to make ropes, twine, footwear, and cloth, so it's a perfect material for stair treads. 07 of 08.
Can carpet be curled over stair nose?
Unless you are a carpet installer, it is difficult to curl ordinary carpet over the nose of a stair. Since the carpet is so stiff, it keeps wanting to uncurl. This product solves that problem. The front section is pre-curled and easily snaps over the stair nose.
Covering Concrete Steps with Wood
We Also Decided to Make The Steps Wider, to Make For A More Grand entrance.
- The whole process of building wood steps over concrete porch steps was way easier than I expected, and made such a dramatic difference. I have already had tons of questions about our new steps, since revealing our farmhouse front porch makeover a few weeks ago, so I decided it was time to give a few more details on the project. Obviously all porches are a little different, so …
The Process
- To begin this project, we purchased a couple of 4-Step Stair Stringers to put on the outside of the old steps. To make our stairs wider, we placed them about a foot out on either side of the stairs. We screwed four 1″ by 8″ treated yellow pine boardsinto the front of the stringers to create the new wood risers. We ran the new wooden railings, which...
More Photos
- Here are more photos to give you a better idea of the process, and how everything was laid out before adding the treads. For the treads, we used the same yellow pine deck boardas we used for the porch floor. On the first step, we had to trim one of the tread boards to 6″ wide, so there wouldn’t be too much overhang. For the rest of the treads, the we pushed excess underneath th…
Finishing Up
- The 1″ by 6″ Treated Pine Deck Boardson the bottom step had to be cut to fit around the bottom railing beam. After the wood risers and treads were all screwed in, we finished the outsides with the same Plytanium Siding Panelthat we used for the porch skirting. We cut it into the same shape as the stringers, except extended it all the way to the ground. I like that it looks seamless with th…