Here’s how you can go about this process:
- Step 1: To begin, use a pair of adjustable spanners or crescent pliers to unscrew the compression fitting.
- Step 2: To expose the olive, unscrew the compression fitting and slide back the compression fitting nut.
- Step 3: Attach olive cutters by slipping the olive cutters’ head over the pipe.
- Step 4: Align the cutting blades to the olives you want to remove.
What is the best way to remove olives from copper water pipes?
What is an olive in plumbing?
How Does Olive Work?
What is the most common shape of olive?
Can an olive cutter cut steel?
Can you remove olives from copper pipe?
See 1 more
How do you remove an olive from a pipe?
0:121:25How to remove an olive - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you ever need to remove an olive you don't have a no leaf puller. You don't have an olive cutter.MoreIf you ever need to remove an olive you don't have a no leaf puller. You don't have an olive cutter. You can sometimes use an adjustable spanner.
How do you remove an olive from a plastic pipe?
0:442:24Monument olive splitter - safely removing an olive from plastic pipeYouTubeStart of suggested clipEnd of suggested clipApply a bit of pressure oh just one hand play more pressure Oh split. And assess the damage splitMoreApply a bit of pressure oh just one hand play more pressure Oh split. And assess the damage split again the slightest of Nicks.
How do you remove an olive compression joint?
1:242:16The easiest way to remove olives used with compression fittingsYouTubeStart of suggested clipEnd of suggested clipYou can then simply take another olive placed up back over the pot gauge. It against the compressionMoreYou can then simply take another olive placed up back over the pot gauge. It against the compression 15 spanner many grip book all the way. On that going is how to get replace the olive.
Can you reuse an olive on a pipe?
Olives can't be removed from a pipe and reused. Even hand tightening a fitting with an olive inside before the pipe is inserted, is enough to make the olive unusable.
What is an olive puller?
The puller utilises the compression nut to simply pull the olive from the pipe without the need to cut olive. With all the major parts of the tool turned from brass, this olive puller provides a quick and reliable remedy to removing most olives.
What kind of olives do you use for plastic pipes?
The connection should not need more than 2 full turns after the olive has gripped the pipe. Copper olives are preferable to brass olives. Ensure nut and olive are in place before inserting pipe insert.
How do you use an olive cutter?
Here's how to remove an old olive using an olive cutting plier:Unscrew the compression fitting and slide back the nut to reveal the old olive.Attach the olive cutters and align the blades over the olive.Squeeze the handles to cut through the olive.Remove the cutter and remove the old olive.
How do you fit a new olive on a copper pipe?
0:001:15Making a 15mm nut and olive compression joint on copper pipeYouTubeStart of suggested clipEnd of suggested clipWe don't want any marks scores or defects on the end of the pipe. And we slide on the nut onto theMoreWe don't want any marks scores or defects on the end of the pipe. And we slide on the nut onto the pipe followed by the olive. And we assemble the fitting just hand tight initially.
Which is better copper or brass olives?
Copper olives are preferable to brass olives when using compression fittings with plastic pipe. I always use brass olives with copper pipes even if the fitting comes with copper olives.
How do you remove olives from copper pipes?
2:023:03Three Ways To Remove An Olive Without A Removal Tool - YouTubeYouTubeStart of suggested clipEnd of suggested clipWay to do this you need to make sure that you scribe diagonally across the olive with your hacksaw.MoreWay to do this you need to make sure that you scribe diagonally across the olive with your hacksaw. During your hacksaw. And you're going to use a small tiny flathead screwdriver to split.
Do you use PTFE tape with olives?
The olive is soft tempered so that it makes a good seal between the copper tube and the chamfer in the brass compression fitting. No need for PTFE tape or yesteryear's equivalent, Boss white.
What are olives used for in plumbing?
Olives, also known as ferrules, are used in compression fittings to help create a water tight seal. They sit on the pipe in between the compression nut and the main fitting body. Once the fitting is applied the olive is squeezed up against it, then the nut is brought down the pipe and screwed to the fitting.
How do you remove a copper olive from a plastic pipe?
4:077:55How To Quickly Remove an Olive from Copper Pipe - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo again these are really difficult to get off of their own plastic pipe yeah again olive cutterMoreSo again these are really difficult to get off of their own plastic pipe yeah again olive cutter slip over the top squeeze it. Together hear the click take it off.
How do I remove a ferrule plumbing?
3:115:11How to Remove a Stuck Ferrule from a Copper Pipe in Seconds - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo here we go just turn. It. I'm gonna do is I'm just going to keep turning it. Until it backs theMoreSo here we go just turn. It. I'm gonna do is I'm just going to keep turning it. Until it backs the compression nut and the curl off the copper.
Can you use brass olives on plastic pipe?
Olives are ideally suitable for use with compression joints and copper or plastic pipe. Supplied in either copper or brass the olive fits directly to the intended connecting end of the pipe.
How do you use an olive cutter?
Here's how to remove an old olive using an olive cutting plier:Unscrew the compression fitting and slide back the nut to reveal the old olive.Attach the olive cutters and align the blades over the olive.Squeeze the handles to cut through the olive.Remove the cutter and remove the old olive.
What is the best way to remove olives from copper water pipes?
Olive, which is often seen in compression fittings in copper water pipes, may be difficult to remove. An olive cutter is the fastest and most reliable method to extract the olives without harming the copper tube. An olive cutter , also known as an olive splitter, is a tool used to cut a copper water pipe’s olive ring or ferrule using two sharp cutting blades. Sites like Maun have a specially designed range of olive cutters you can check out.
What is an olive in plumbing?
In plumbing, an ‘olive’ is compressed between two tapered surfaces and the pipe using compression fittings. A valve, connector, or any other kind of fitting’s body and nut have two surfaces.
How Does Olive Work?
In small diameters, compression fittings are often constructed of brass, copper, or steel, and is comprised of an external compression nut and a ferrule, sometimes known as a ‘olive.’
What is the most common shape of olive?
Olives come in a variety of shapes and sizes, but the most common shape is a ring with beveled sides. In order to work correctly, the copper olive must be put in the correct location due to the olive’s barrel form.
Can an olive cutter cut steel?
To avoid damaging your olive cutter, never attempt to remove a steel olive with it. Olive cutters can’t cut tempered steel because it’s too hard. Before utilizing an olive cutter, it’s critical to understand these steps to avoid damaging the pipe .
Can you remove olives from copper pipe?
You may now easily remove the olives from the copper pipe using these methods. Just be careful not to damage the olive since it can’t be used again after removing it from the pipe. Also, the kind of olive removal tools you employ will depend on the olive’s millimeter size. Take these few reminders, and you’ll be all set.
How to get olive off of pipe?
You could try an adjustable spanner over the pipe and hit the compression nut against the olive to force it off.
What happens if you over tighten an olive fitting?
If the fitting has been over-tightened then the tube will be necked - no point in removing the olive as the tube is useless.
Is it worth removing olives from copper?
If these are odd ends of copper, for the inch or so you would save by removing olives its not worth the effort.
How to remove olives from pipe?
Bash the back of the nut against the olive - using an adjustable wrench around the pipe. If the olive is fairly new - this tends to remove them. However, if they are old and have been squeezed too hard - they don't budge. So my next step is usually to cut the pipe shorter and make good by adding a new section of pipe. This works, but often there is not much room for manoeuvre, so wondered is there is a better way?
How to cut olives without damaging the pipe?
used a cutter once during training, they work by using two sharp blades to cut into the olive without damaging the pipe, honestly though save yourself the money and weight in your box and just use a junior hacksaw, have about 3 or 4 practices on a length of pipe and you should be good to go.
How to get an olive off a hacksaw?
So we would use a combination of tricks to get the olive, i.e. spanner behind back nut and knock the olive off, hacksaw as already explained, piece of wood and tap the olive downward with it.
Did cave man have olive pullers?
In the cave man days of the last century, there was no such thing as olive pullers. Except in Italy and then it was for the olives you eat not those you put on pipe's.
Can you cut olives with a hacksaw?
or you can cut the olive with a junior hacksaw but be careful not to cut the pipe.
How to cut metal pipe?
Before you start cutting your metal pipe, take a step back. There are a few elements you should think about first: 1 The Project- Instead of diving in, think about your project first. What exactly are you planning to make? Have you measured (and double-checked) the length you need to cut? 2 Tools- Make sure you have the tools you need before cutting your pipe. It’s easy to cut pipe, but if you don’t have the right tools, you can injure yourself or damage the pipe. 3 Safety- Safety is key. Make sure you have work gloves, eye-covers, and any other protective materials you need. 4 Budget- What is your budget for this project? If you are working with a limited budget, you might want to think twice before you purchase metal-cutting tools. To save some money, you could purchase pre-cut pipe instead. We’ll go into more detail about this later in the post. 5 Time- How much time do you have to dedicate to this project? Using pre-cut pipe can also help you save time. You won’t have to spend any time cutting and instead can focus on building your project.
How to smooth cut pipe?
Give the blade time to speed up before touching it to the metal. After you’ve started the grinders, move the blade to the pipe and make the smooth cut.
What do you need to know before cutting a pipe?
Tools- Make sure you have the tools you need before cutting your pipe. It’s easy to cut pipe, but if you don’t have the right tools, you can injure yourself or damage the pipe. Safety- Safety is key. Make sure you have work gloves, eye-covers, and any other protective materials you need.
What tool to use to remove old pipe?
Angle Grinder. A power tool is useful if you are trying to remove old pipe from a tight space. You’ll want to use protective goggles, gloves, and earplugs when working with an angle grinder. Make sure you have the right wheel for cutting metal. Blades with smaller tines are best for this material.
What is tube cutting tool?
Tube cutting tools make precise cuts, which is especially important for cutting new pipe. Unlike the other tools mentioned below, this tool only works to cut pipe. So, you might not want to invest in this tool unless you plan to make a lot of projects with pipe.
What do you use to smooth out burrs?
After making your cut, you will need to file the cut end to make it smooth. You can use a metal file or sandpaper to smooth out the burrs.
Can you cut metal pipe at home?
Cutting metal pipe is a crucial step in a variety of DIY projects. Don’t let this intimidate you. With some basic instructions and the right tools, it’s easy to cut metal pipe at home.
What to use to trim olive trees?
The most common tool you’re going to use for your olive tree pruning is shears. Make sure you get pruning shears instead of grass shears , as the latter should be used for trimming your lawn. Some people call pruning shears hand pruners because they’re a handheld device.
How often should you prune your olive tree?
You must resist. You’re only supposed to prune annually. Yes, just once.
What is the best fertilizer for olive trees?
Another facet to the care of your olive tree is fertilizing it. You don’t want to use just any fertilizer, though. Rather, you should favor a nitrogen fertilizer . Of all the nutrients that your olive tree may lack, nitrogen is at the top of the list. Without enough nitrogen, a deficiency could develop. This prevents your olive tree from growing leaves, fruit, and flowers.
What is the difference between lateral and vertical branches on an olive tree?
For one, vertical branches grow further from the trunk of the olive tree than lateral branches. They’re also slimmer and tend to point upwards while lateral branches are thick and fan outwards. Further, vertical branches are not nearly as important as lateral branches.
How many branches does an olive tree have?
As we said before, your olive tree will have three lateral branches at the very least if you give it a few years to grow uninterrupted. Some even have four. These are healthy trees, which is what you want.
What does an olive tree look like?
When you’re pruning then, it’s to shape the tree. The best olive trees are those that look like a martini glass. These trees have a triangular shape to the growth and a long, sturdy trunk. Now, the shape you’re envisioning does not mean a literal martini glass.
How long does it take for an olive tree to mature?
It’s only when the lateral branches are weak, even tired, that you want to cut them. This can take years, as your olive tree has to mature quite a bit.
How to squeeze olives off a pipe?
You can try this beforehand if you wish - get two adjustable wrenches and set them to the distance the olive is from the end of the pipe. Place the jaws so's one's behind the nut and t'toher on t'end of t'pipe. Place the second one ditto, but on t'other side of t'pipe. The idea is that you squeeze at the same time and the nut gets driven off square; if you try this on chust one side, the olive will bite into the pipe and won't budge.
What happens if you overtighten an olive pipe?
Problem is if the olive has been overtightened then the copper pipe has become crushed. When you come to make the new joint it can then be quite tricky to get a seal. Best way is to cut the old olive off and the remaining pipe may have enough free play to reach the valve. If not, just solder on a new bit.
How to snap olives?
Carefully cut through most of the olive at an angle with a large hacksaw, then snap it by turning a flat screwdriver in that groove.
Can you cut olives all the way through?
Don't cut all the way through the olive it will snap when you twist the screwdriver.
What is the best way to remove olives from copper water pipes?
Olive, which is often seen in compression fittings in copper water pipes, may be difficult to remove. An olive cutter is the fastest and most reliable method to extract the olives without harming the copper tube. An olive cutter , also known as an olive splitter, is a tool used to cut a copper water pipe’s olive ring or ferrule using two sharp cutting blades. Sites like Maun have a specially designed range of olive cutters you can check out.
What is an olive in plumbing?
In plumbing, an ‘olive’ is compressed between two tapered surfaces and the pipe using compression fittings. A valve, connector, or any other kind of fitting’s body and nut have two surfaces.
How Does Olive Work?
In small diameters, compression fittings are often constructed of brass, copper, or steel, and is comprised of an external compression nut and a ferrule, sometimes known as a ‘olive.’
What is the most common shape of olive?
Olives come in a variety of shapes and sizes, but the most common shape is a ring with beveled sides. In order to work correctly, the copper olive must be put in the correct location due to the olive’s barrel form.
Can an olive cutter cut steel?
To avoid damaging your olive cutter, never attempt to remove a steel olive with it. Olive cutters can’t cut tempered steel because it’s too hard. Before utilizing an olive cutter, it’s critical to understand these steps to avoid damaging the pipe .
Can you remove olives from copper pipe?
You may now easily remove the olives from the copper pipe using these methods. Just be careful not to damage the olive since it can’t be used again after removing it from the pipe. Also, the kind of olive removal tools you employ will depend on the olive’s millimeter size. Take these few reminders, and you’ll be all set.
