- Measure the width of the window to determine the necessary width of the blinds. ...
- Mark the smallest measurement, and cut to this. Most windows are going to have regular, even spacing, but older houses may have some variability.
- Subtract 1/4-inch from each side to ensure the blinds have room to move up and down. ...
- Measure the blinds from the head rail and use a pencil to mark your new desired length. ...
- Cut the blind headrail using a hacksaw or tin snips. Remove the metal end stiffener bracket from the side (s) you are cutting.
Can I trim trim my vinyl blinds?
How to Shorten. It's easy to make your Trim+Go blinds and shades shorter to fit your windows. Our guide will show you how to adjust them to the length you need.
Does Home Depot cut vinyl blinds to fit?
Custom Cut In Store & Installation. There's no such thing as a standard window size. Make sure you measure your windows before you buy window treatments. If you have unique window shapes and sizes, we can help you get your own look with custom shades. Our in-store associates can cut your shades to size, for free.
How to cut Levolor blinds to fit windows?
Method 1 Method 1 of 2: Cutting the Head Rail
- Measure the width of the window to determine the necessary width of the blinds. ...
- Mark the smallest measurement, and cut to this. Most windows are going to have regular, even spacing, but older houses may have some variability.
- Subtract 1/4-inch from each side to ensure the blinds have room to move up and down. ...
How to cut down horizontal blinds that are too wide?
- Remove the metal end stiffener bracket from the side (s) you are cutting.
- Use the hacksaw or tin snips to cut the headrail per your measured mark.
- File any rough edges with a metal file. ...
- Replace the metal end stiffener onto the newly cut headrail.
What do you cut vinyl blinds with?
0:434:13How to Cut Blinds to Fit Width - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd we're going to be cutting this right on a chop saw with a wood chop saw blade. So it's just aMoreAnd we're going to be cutting this right on a chop saw with a wood chop saw blade. So it's just a regular chop.
Can you cut vinyl window blinds?
If the vanes on a vertical blind are too long they can be trimmed to the correct length. Because the vanes are made from a thin pvc vinyl material they are easy to cut.
How do you cut pvc mini blinds?
Cutting down the slatsAlign the slats so that they are even.Using a clamp or rubber bands, secure the slats together into position.Wrap the slats with masking tape to prevent chipping.Measure where you want to cut and mark a line with your pencil. ... Lay them on the saw and line up the blade where you need to cut.More items...
How do you cut vinyl blind slats?
0:181:16How to Cut Vertical Blinds Slats - Fast, Easy, NO SPECIAL ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext you line up the bottom. Make your line. Then you remove the old one and you fold it over gunnedMoreNext you line up the bottom. Make your line. Then you remove the old one and you fold it over gunned it and you're done ready to go then all you do is reinstall your vertical blind. And you're done.
Can vinyl mini blinds be cut to size?
2:176:30How To Cut Mini Blinds To Width Quick & Easy! - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's really simple you do want to measure. Three or four times and make sure and double check yourMoreIt's really simple you do want to measure. Three or four times and make sure and double check your measurements there. Before you start cutting. It's okay if you cut it a little long.
How do you cut vinyl blinds at home?
0:041:04Window Blinds : How to Cut Down Mini-Blinds - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing the measuring tape mark the spot where you will cut the blind down on the headrail of theMoreUsing the measuring tape mark the spot where you will cut the blind down on the headrail of the blind. Take the hacksaw and sawed off this portion of the headrail.
How do you cut blinds to fit length?
0:051:46How to Shorten Wood and Faux Wood Window Blinds | The Home DepotYouTubeStart of suggested clipEnd of suggested clipInsert your bottom rail through the ladders. Directly below your last slat. And thread the lift cordMoreInsert your bottom rail through the ladders. Directly below your last slat. And thread the lift cord back through the holes in the bottom rail. Next place your bottom rail on the windowsill.
Can you cut blinds with a circular saw?
Cut the blind slats and bottom rail using a circular saw or table saw. For plastic blinds, you might even be able to use a powerful set of sheers. Confirm that all slats, the headrail, and the bottom rail are cut at the same length. If not, trim individual elements as needed to ensure a consistent width.
How do you cut blinds to length?
0:252:10How to Shorten Horizontal Window Blinds from SelectBlinds.comYouTubeStart of suggested clipEnd of suggested clipOnce the bottom rail is resting on the ladder of the blind. Cut the cording below the ladder. LeaveMoreOnce the bottom rail is resting on the ladder of the blind. Cut the cording below the ladder. Leave enough cording to tuck into the bottom rail plug.
Can you cut vertical blinds with scissors?
Many popular vertical blinds are composed of a thin PVC vinyl material. They're the easiest to trim because they can be cut with sharp scissors.
Can you cut blinds that are too wide?
Occasionally window blinds are mis-measured and are too large to fit in the window frame. Most horizontal blinds such as wood blinds and faux wood blinds can be trimmed or cut down to the right width so they can be installed.
How do you use a slat cutter?
3:094:51How to cut and trim venetian window blinds to fit if they are oversizeYouTubeStart of suggested clipEnd of suggested clipIt's as simple as that just chops. It. There you can see how you do it. In there push down and thatMoreIt's as simple as that just chops. It. There you can see how you do it. In there push down and that will cut. It.
How do you cut a vinyl shade?
1:496:37How To Cut and Resize Roller Shades. It's EASY! Why buy custom ...YouTubeStart of suggested clipEnd of suggested clipUse the two by fours to hold down the ends measure the width of the old blind. Put on your whiteMoreUse the two by fours to hold down the ends measure the width of the old blind. Put on your white socks slippers. And favorite ripped shirt. And mark the width from top to bottom.
Will Home Depot cut blinds not purchased there?
Once you have properly measured, bring your measurements in to the store. Our associates can cut your in-store bought blinds to the exact size needed, for free.
Can you cut down pvc venetian blinds?
You should be able to cut aluminium and pvc slats with a pair of strong and sharp scissors or maybe tin snips if you have them. The slats from wood venetian blinds can be cut individually with a hand panel or jigsaw but for the best results all the slats should be cut together with a powered chop saw or bench saw.
How do you trim blinds that are too long?
0:001:29How To Shorten Wood and Faux Wood Blinds | Blinds.com - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe bottom rail of your blind. Now pull up on each lift cord just enough so that you can easily pullMoreThe bottom rail of your blind. Now pull up on each lift cord just enough so that you can easily pull out the extra splats insert your bottom rail through the ladders. Directly below your last slat.
Where do you measure for blinds?
Make sure you measure the inside of the frame, where the blinds actually fit, and not the entire window frame. Measure in at least three places -- the top, bottom, and middle of the window. ...
What are horizontal blinds?
Learn more... Horizontal blinds are practical window treatments that help to enhance the comfort and beauty of your home or office. Many blinds are affordable and easily attainable in most standard window sizes. However, there are times that window blinds are incorrectly measured or are sold only in sizes too wide to fit your window.
Can you cut chords off of both sides?
You may either cut an even amount off of both sides or cut only from the pull cord side. If the chords are on one side, you can cut only from the other side. In many ways, only cutting one side is much easier. ...
1. Put the Slats in the Closed Position
Lay the blind, with slats attached, on the floor and draw the cords to imitate closing the blind. Rotate the slats to the closed position.
2. Take Your Measurements
Measure the new blinds from the top of the headrail to the bottom of the slats and note the existing length. Next, measure the height of the window from where the top of the headrail will fasten, to determine the desired length of the blinds. Subtract the two measurements to determine how much to remove from the bottom of each slat.
3. Label the Slats
Number and label each slat as it hangs in the headrail from left to right. Write the number on a small piece of tape and tape it to the front side of the slat near the headrail.
4. Take a Picture of the Slats
Note the orientation of the slats at they hang in the headrail. It is helpful to take a close-up picture for reference when rehanging the slats.
5. Remove the Slats
Remove the slats from the carriers holding them to the rod, instructs Bloomin' Blinds. Lay them side by side on a work surface. Orient all the slats the same way, with the bottom edges all toward one end.
7. Measure From the Bottom
Mark the new bottom edge on the slat nearest you with the measurement of the amount to remove. Measure from the bottom up and mark with a pencil or fine felt-tipped marker. Measuring from the bottom up will ensure an even bottom edge.
8. Make Your Cut
Cut along the new edge line of the first slat using 10-inch heavy-duty shears or tin snips. Cut in one motion from start to finish with one cut. Small cuts will result in a jagged bottom edge.
How to measure for mini blinds?
1. Measure the height of the window. You need this to determine the exact length that you need for the mini-blinds. Start with the inside top of the casing where the blinds will be mounted, and measure all the way to the windowsill below.
What are mini blinds?
Mini-blinds are equipped with plastic plugs on the underside of the bottom rail. Most designs will feature 3 plugs along the length of the rail. Releasing the plugs allows access to the lift cord and the 3 string ladders on the mini-blinds. You can usually just pull out the plugs without having to do anything fancy.
Can mini blinds be shortened?
Fortunately, it is possible to shorten mini-blinds with relatively little effort.
Can you shorten mini blinds?
While it is possible to shorten mini-blinds while they are hanging in a window, simply eye-balling the length, laying the blinds on a flat surface makes it easier to apply exact measurements and is often a much quicker process. Thanks! Helpful 8 Not Helpful 3. Save the removed blind slats in a safe place.
How to shorten cordless mini blinds?
Begin the process of shortening the cordless mini blinds by seeing how the set fits over your window. From there, you can select a new bottom slat and move the bottom rail up to match with it. Removing the excess slats and ladder cord will also be necessary if you want to ensure that the blinds work properly.
How to measure mini blinds?
Mini blinds are often inside-mounted so you have to take measurements in specific ways. Start by measuring the height of the window. Position your tape measure along the bottom edge of the window’s upper casing and pull it down. Take measurements going from the left, center, and right portions of the window.
How to get spare eyelets for blinds?
You should find spare eyelets included with your blinds. Get them now and then start threading one length of the lift cord through one eyelet. Continue doing that until all the lift cords have been passed through eyelets.
How to know if blinds are installed on a window?
You should also check if inside-mounted blinds can be installed on your window by inspecting its depth. Look at the upper edge of the window and see if there’s a flat surface there. Measure how big that flat surface is.
Why are blinds so scary?
That’s scary because they could get all tied up in the cords. If they pull forcefully on the blinds, the set may also fall down on them. To put it simply, excessively long blinds pose a threat to curious children. You need to keep those blinds at the right length and keep them away from kids.
What does a long blind look like?
They look like an oversized dress that’s dragging along the surface of the ground. Furthermore, long blinds may actively take away from your home décor. Instead of highlighting the ornate decorative elements along your windows, the long blinds will just obscure them.
Can you cut vertical cords on blinds?
Remember to cut only the horizontal cords. If you cut the vertical lift cords, you will ruin the blinds. With the horizontal lift cords beneath the new bottom slat now cut, you should be able to remove the excess slats. Discard the removed slats whichever way you see fit.
How to cut blinds with a knife?
Hold the knife at a 45-degree angle with the point angled towards the straight edge. Place pressure on your straight edge with your nondominant hand to keep it in place. Puncture the screen near the top of your straight edge. Tip: Put a cutting board or sheet of cardboard underneath your blinds before you cut it.
How to draw a line through roller blinds?
Connect your straight edge to the bottom of your roller blinds and draw a line through your markings with a grease pencil or permanent marker. Repeat this process , making a line of equal length that connects all of your marks. Extend your line through the top of your blind.
How to measure for blinds?
1. Use a retractable measuring tape to measure your window frame. Since your blinds are going to rest inside your window frame, you need to measure the distance between the interior edges of your window.
What is roller blinds?
Roller blinds refer to any window blinds that use a single sheet of fabric to cover the entirety of a window. Cutting roller blinds is an easy and straightforward process. Since the materials used to manufacture roller blinds are often quite thin, it’s not difficult to remove a section of the blinds with a utility knife, hacksaw, ...
