- Spray the outside of the toilet with a disinfectant bathroom cleaner and let the cleaner sit for a couple minutes, or as recommended by the manufacturer.
- Starting with the tank or top, wipe down the back, front and sides of the toilet all the way to the floor.
- Clean the toilet handle with a disinfecting wipe.
How do you clean the inside of a toilet bowl?
Combine the ingredients in a storage container. Clean the toilet bowl: Sprinkle the sides of the toilet bowl. Let the powder rest for 15 minutes, then scrub the toilet with a toilet bowl brush, and flush. Disinfect the toilet bowl: Spray hydrogen peroxide or vinegar on the sides of the toilet bowl, let the spray rest for 30 minutes, then flush.
How to clean a toilet in an apartment?
Instructions. 1 Gather Supplies and Prepare the Area. Start by removing everything from around your toilet—cleaning a toilet can be a messy job, and there's always ... 2 Flush and Add Cleaning Solution. 3 Clean the Exterior of the Toilet. 4 Clean the Toilet Seat. 5 Clean the Inside of the Toilet Bowl. More items
What is the best disinfectant for toilet bowl?
The toilet bowl is now clean (AKA: the dirt and well, you know what else has been removed). Now it’s time to disinfect. When it comes to naturally disinfecting surfaces, two ingredients work very well: hydrogen peroxide and/or vinegar.
Is your toilet bowl clean and disinfected?
Now your toilet bowl is naturally clean and disinfected! Cleaning the toilet bowl with one of my homemade cleaners is as simple as mixing the powder or liquid ingredients, squirting or sprinkling the cleaner on the sides of the toilet bowl, and then letting the cleaner rest in the toilet for a few minutes. Easy peasy
Do toilets need to be disinfected?
To keep toilets fresh, clean and protected against bacteria, daily restroom cleaning is very important. The type of facility and amount of traffic in the restroom usually indicates how often the toilet needs to be cleaned. In general, they should be disinfected at least once a day.
How do you disinfect a toilet naturally?
For no-fuss toilet cleaning, keep a spray bottle of vinegar and a shaker-top bottle of baking soda in your bathroom. When toilets need cleaning, spritz thoroughly with vinegar and allow to sit for several minutes. Sprinkle baking soda inside the bowl, scrub the inside of the bowl, and flush toilet.
Does vinegar disinfect toilets?
Toilets. Pour 2 to 3 cups of undiluted vinegar into the toilet bowl and let it sit for up to 3 hours. Scrub with a toilet brush and flush. This helps eliminate rings around the bowl and deodorizes the toilet.
Is it OK to pour bleach down toilet?
Pouring bleach down the drain is dangerous since it reacts with substances in your pipes, release toxic fumes when mixed with other household cleaners, clog or damage your drains and pipes, and kill the good bacteria of your septic system.
What is the most hygienic way to clean toilet?
Using either disinfecting wipes or a combination of disinfecting spray and a rag, paper towels, or a sponge (that you reserve just for this task), wipe down all of the external surfaces of the toilet, paying special attention to any areas you touch regularly such as the seat and the flushing handle.
How do I disinfect my toilet without bleach?
A spray consisting of equal parts vinegar, baking soda and water is an excellent multipurpose cleaner. Sprinkle a cup of borax and a quarter-cup of vinegar into your toilet bowl, let it sit overnight, then scrub and flush in the morning.
Can I leave vinegar in toilet overnight?
For particularly stained or foul tanks, turn the water valve off, flush the toilet until the tank is empty, and fill the tank with just vinegar (no water), letting it sit overnight.
Can you leave baking soda and vinegar in toilet overnight?
For extra-stubborn clogs, you can let the fizz mixture sit overnight or combine this method with plunging. If your toilet remains clogged or continues to get clogged, this may be an indication of plumbing problems such as mineral buildup or pressure issues. Ask your local Mr.
Can I put vinegar and baking soda in the toilet?
Baking soda and vinegar, when mixed together, can form a chemical reaction that looks sort of like an eruption. This chemical reaction can help clear your toilet and any pipe clogs that you might have.
What happens when you pour white vinegar in your toilet tank?
Vinegar is a great toilet cleaning solution. Not only is it free of chemicals and naturally antibacterial, it's also an acid, so it will remove minor lime and calcium deposits. All you need to do is pour a couple cups of vinegar in your tank and let it sit for an hour or so, then scrub and flush to rinse.
Can you use Lysol to clean toilet?
If you're wondering what to clean a toilet seat with, our best toilet seat cleaner for quick and convenient daily cleaning on hard, non-porous materials such as ceramic seats is Lysol® Disinfecting Wipes.
How long should you leave bleach in toilet?
Don't flush the toilet right away. Instead, let the bleachy water in the bowl stand for 6 minutes; set a timer if you need to. Set the bleach bottle on the closed lid so you don't forget that toilet cleaning is in progress.
How do you keep a toilet clean without chemicals?
Sprinkle baking soda around the top of your toilet before using a cup of undiluted white vinegar to swill the pan. Finally, grab a toilet brush and give the entire toilet bowl a good scrub. This will not only clean the toilet of stains, but it will also eradicate any strong urine smells that are lingering.
Why should you put a cloth with vinegar in the toilet?
Its acidity can cut through grime, eliminate stains, and stop odor in its tracks, making it a great tool for cleaning your toilet and a great way to avoid common cleaning mistakes.
How do you deodorize a toilet naturally?
An even simpler odor solution is to pour vinegar into the toilet and let it work for an hour or so before flushing. For extra deodorizing power, mix baking soda and vinegar in the toilet. 8. Fresh eucalyptus leaves are a very effective bathroom deodorizer.
How do you make a homemade toilet cleaner?
1:434:06How to Make Your Own Toilet Cleaner With Pantry Items - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we've got a half cup of baking soda there hydrogen peroxide this comes in the brown bottle youMoreSo we've got a half cup of baking soda there hydrogen peroxide this comes in the brown bottle you you know I buy it by the gallon.
How to clean and disinfect a toilet bowl
Scrub the toilet with a multipurpose cleaning product (our favorite is the vinegar-powered 9 Elements Bathroom Cleaner) or a simple mixture of dish soap and warm water. Scrub the toilet’s inside and outside, top and bottom.
How to clean toilet bowl stains
Your toilet deals with a lot. Here are the best techniques to get rid of the variety of stains plaguing your throne.
How to keep your toilet tank clean
Drain your toilet tank, and fill it with vinegar regularly. The acid in vinegar kills mildew and dissolves mineral deposit buildup.
What is the best way to disinfect a toilet bowl?
Simply attach a spray nozzle on the hydrogen peroxide bottle or vine gar bottle (if your vinegar bottle is bulk-size, just pour the vinegar into the toilet bowl or pour the vinegar into a separate spray bottle).
How to disinfect a toilet bowl?
In the kitchen, these two disinfectants are a powerhouse when used back to back to disinfect a surface (you should NEVER combine the two ingredients into one cleaner). When it comes to toilet bowl disinfecting, I only use one ingredient: hydrogen peroxide or vinegar. Simply attach a spray nozzle on the hydrogen peroxide bottle or vinegar bottle (if your vinegar bottle is bulk-size, just pour the vinegar into the toilet bowl or pour the vinegar into a separate spray bottle). Then, spray or pour the disinfectant on the sides of the toilet bowl. Let the disinfectant rest for 30 minutes so it can work against germs, then flush!
How to make a toilet cleaner?
Instructions. Combine the ingredients in a storage container. Clean the toilet bowl: Sprinkle the sides of the toilet bowl. Let the powder rest for 15 minutes, then scrub the toilet with a toilet bowl brush, and flush. Disinfect the toilet bowl: Spray hydrogen peroxide or vinegar on the sides of the toilet bowl, let the spray rest for 30 minutes , ...
What is the purpose of disinfecting?
Disinfecting takes care of more than just dirt, grease, or dust. Disinfecting knocks-out the bad germs that can make us ill. I don’t believe disinfecting every surface on a regular basis is essential in the modern-day home. Now when the stomach virus comes knocking, or I cut raw meat on my favorite cutting board, I’m all about using a homemade disinfectant spray.
How to make a sanitizer with borax?
Ingredients. 1/2 cup baking soda. 1/2 cup borax. 1/2 cup coarse sea salt or kosher, You can find an inexpensive 3lb box at most grocery stores. Don't waste money and use expensive mineral-rich salt like Himalayan salt, in this recipe. 15 drops grapefruit essential oil or favorite cleaning essential oil.
What is cleaning a house?
Cleaning consists of regular home maintenance: dusting, wiping surfaces, using soap to wash our hands, washing and sweeping the floor with hot water and possibly soap, vacuuming, spraying and wiping mirrors and glass, etc.
Is disinfecting a maintenance or an activity?
Disinfecting is an activity that’s (generally) done after cleaning and, in my cleaning opinion, needs to be done much less often in the average home.
How to clean a toilet with vinegar?
Begin by applying toilet cleaner to the bowl, and allow it to soak. If you’re using vinegar in place of toilet cleaner, simply pour a cup into the bowl. Quickly swish the cleaner around the bowl with a brush . While the cleaner soaks in, spray the exterior of the toilet with an all-purpose disinfectant. If the toilet is extra dirty, give it ...
Why do we clean toilets?
But like most household care, cleaning your toilet regularly will make the process even easier next time. Regular toilet cleaning also eliminates harmful bacteria and ugly mineral or soil buildup.
What to use to clean sink with?
It’s not a good idea to clean the sink with the toilet sponge or wash dishes with the same rubber gloves . Waterproof rubber gloves. Scrub sponge. Toilet cleaner or vinegar.
How Can I Disinfect the Object That Fell In the Toilet?
Immediately after you retrieve the item, drain the excess water on the edge of the toilet bowl. If the recovered object is not a cell phone or electronic device, and you want to know how to disinfect something that fell into the toilet, follow these simple steps:
How Do You Clean a Toothbrush That Fell Into the Toilet?
The toothbrush is a personal hygiene item , which we use daily. Just thinking about it going into the toilet can be uncomfortable and unpleasant.
Can You Get Sick from Toilet Water?
When we flush the toilet with the lid open, bacteria can contaminate other areas of the bathroom. According to one study, bacteria can jump up to five feet around the toilet. These bacteria can stick to doors, the mirror, the ceiling, or even our toothbrushes. That is why we must lower the toilet lid before flushing. Failure to do so may affect our health.
How to clean a toilet?
Gather Supplies and Prepare the Area. Start by removing everything from around your toilet—cleaning a toilet can be a messy job, and there's always the chance of splashing cleaner or water outside of the actual toilet. Prevent extra cleanup by removing all excess items from around the toilet and on the tank lid.
What to wear when cleaning a toilet?
Wear eye protection when cleaning a toilet. Most cleaning products have bleach and other chemicals that can irritate or damage your eyes, and eye protection will prevent you from splattering toilet water and cleaner. You may also want to use protective rubber or latex gloves to prevent contact with your hands.
How to clean a toilet with a gel cleanser?
Flush and Add Cleaning Solution. Put on rubber gloves before beginning any work. Flush the toilet with the lid down to prevent splashing or spraying. Add your choice of powdered, liquid, or gel cleanser into the toilet bowl, applying as close to the toilet rim as possible to prevent the cleanser from being diluted.
How to clean rusty porcelain bowl?
Next, scrub the bowl with the toilet brush, including the drain hole opening at the bottom of the toilet bowl. Flush the toilet with the lid down. If the toilet bowl has brown or reddish rust or mineral stains, you can clean the porcelain with baking soda or a commercial product, such as Lime-Away or Rust-Away.
Is it a good idea to clean a toilet?
While it's not complicated, it is possible to get it wrong. Believe it or not, there actually is a right way to clean a toilet, and the proper method will help ensure that you eliminate any bacteria and viruses that may be thriving there. The right cleaning techniques will not only give you superior results but also save you time and energy.
Can you wash paper towels in hot water?
Paper towels are a great option because they can be thrown away. If you use reusable cloths, wash them immediately in their own load in hot water with bleach. Avoid toilet bowl cleaner tablets or disks, like the kind that's dropped into the tank or hangs inside the rim of the bowl.
Can you use a sponge to scrub a toilet?
If possible, do not use sponges when you scrub a toilet. Damp sponges provide a perfect environment for breeding bacteria. If you must, experts advise sterilizing sponges by placing them into a microwave oven for 30 seconds or so while damp, as heat generally kills all pathogens.
What to use to clean rusty toilet bowl?
For those difficult toilet bowl stains, grab a stiff-bristled toilet brush to scrub the bowl's interior and under the rim. If you notice a rust-colored ring inside the bowl, the culprit is likely minerals in your water system. Cleaning experts agree the surefire way to attack such stains is with a pumice stone.
How to clean a toilet bowl with pumice?
Don't worry, as the pumice is a softer stone, it won't scratch the porcelain surface. Turn the toilet's water back on, then flush to rinse the bowl.
How to clean a toilet with a wet brush?
As a last step, clean your supplies. Prop the wet toilet brush under the seat cover and pour bleach or cleaning solution over its business end, into the toilet bowl. Let sit for a minute, then rinse with a pitcher of water. Clean the brush's canister by filling it with warm, soapy water; you can dump it right in the toilet, too. Resist the urge to stick the damp brush back in the canister and be done with it, suggests Maker. Instead, you want to let the brush air out completely before putting it away, to ensure you're not encouraging bacteria growth.
How long does it take for toilet cleaner to work?
Whichever toilet bowl cleaner you prefer, use generously and remember to apply some under the bowl's rim. Then, while you're waiting five to ten minutes for those suds to fully work, turn your attention back to the toilet's exterior.
How to clean gloves before going to the toilet?
But before you do, head for the sink and give your gloved hands a good scrubbing with soap and hot water. "It's the best way to make sure you don't get your hands dirty and get every inch of the gloves clean," says Maker.
Can you use milder cleaner to clean toilets?
She recommends draining the water out of the toilet before applying the cleaning solution. "If you get the water out of toilet, you can use a milder cleaner with the same squeaky-clean results," she adds. Plus, you get a better clean with less work.
Can you spray the walls behind a toilet?
Also spray the walls behind and beside the toilet. A University of Arizona microbiologist found that with each flush, bathroom particles can launch into the air before settling onto nearby surfaces. That makes the floor and walls around the toilet prime spots for microscopic splatter.
