Pour a line of epoxy onto the cup as it’s spinning. Allow the cup to gently sweep your gloved finger as it turns as you move the epoxy with you fingers up and down the cup. Do this until the cup is completely covered. Be sure to cover the bottom of the cup with epoxy if it’s not taped off.
How do you apply epoxy to a cup?
3:264:58How to Apply Epoxy to a Tumbler - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd it will make like almost a drop down here so you want to rotate it about 90 to 180 degrees everyMoreAnd it will make like almost a drop down here so you want to rotate it about 90 to 180 degrees every couple minutes so the epoxy lays smooth.
What do I need to epoxy a tumbler?
Along with at least three days, here's a list of what you'll need for your first tumbler:Stainless Steel Tumbler (I used a 20oz)Spray Paint.Painters Tape.Mod Podge.Silicone Brushes.Fine Glitter.Clear Coat Spray.Epoxy (Both A and B parts)More items...•
Do you have to sand a cup before epoxy?
3:188:48Prepping Epoxy Resin Tumblers for Beginners - Sanding and PaintingYouTubeStart of suggested clipEnd of suggested clipSandpaper. Once you're done with the sandpaper you're gonna take a wet paper towel wipe that tumblerMoreSandpaper. Once you're done with the sandpaper you're gonna take a wet paper towel wipe that tumbler all over to get any sand paper residue off of it.
What kind of epoxy do you use for cups?
1. ENVIROTEX LITE EPOXY RESIN For Tumblers. Envirotex Lite is a brand of epoxy resin you can use for tumblers, whose claim to fame is that it is a pour-on, high gloss finish. It cures to a thick, glossy coating in about 8 hours at 70F, and reaches full cure in about 48 hours.
How do you make a beginners epoxy tumbler?
3:1211:54How to EPOXY a Tumbler!!!! Beginner Friendly - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I only use one gloved hand and what I like to do is what you're gonna see me do I'll pour it onMoreSo I only use one gloved hand and what I like to do is what you're gonna see me do I'll pour it on the cup. And then I'll use my finger to catch it and just leave my finger on one spot.
How many layers of epoxy do you need for a tumbler?
2-3 coatsOur crafters wonder typically how many coats of epoxy is enough for their tumbler. It does depend on what you're creating, but the average is 2-3 coats. To properly seal all the layers beneath, we recommend using a topcoat of your resin.
Do you seal spray paint before epoxy?
Covering spray paint art in a coating of ArtResin is easy - in fact, epoxy resin takes spray paint art next level, sealing and protecting it with a professional looking finish and a glossy sheen that makes colour pop!
How long after spray painting a tumbler can you epoxy?
Epoxy Tumbler Steps I let my cups turn for upwards of 12 hours, usually overnight. Weather can play a big part in the dry time of the epoxy. Epoxy likes warm temperatures and low humidity.
How do you epoxy a tumbler without a turner?
0:414:07Hand turning - Application of epoxy without a cup turner - another methodYouTubeStart of suggested clipEnd of suggested clipWith that said all you do is. I usually put my hand inside of my tumbler and I like to tape my endsMoreWith that said all you do is. I usually put my hand inside of my tumbler and I like to tape my ends off. So I'll have my tape on there and then I'll mix my epoxy.
Is there food grade epoxy?
The FDA's Title 21, Volume 3 report shows that food safe epoxy does indeed exist. Even though epoxy is generally not connected with a specific setting in the kitchen, several brands claim their epoxy is formulated with FDA approved raw materials.
Are epoxy and resin the same?
So, what's the difference between resin and epoxy? Epoxy is a specific type of two-part resin. Epoxy resins are the most commonly used type of resin for crafting and creating art with resin. Because they are the easiest to measure and mix, epoxy resins are what I recommend for resin beginners.
How long does it take for epoxy to dry on a tumbler?
Let The Tumbler Cure: Leaving the motor running, allow the cup to continue turning until the resin is dry to the touch, approximately 18-24 hours later. Remove the tumbler from the cup turner and remove the tape. Allow the cup to continue curing - it will be fully cured at the 72 hour mark.
How much does it cost to start a tumbler business?
Bear in mind, the basic level tumbler business startup cost of $800 to $1200 includes the supplies($300-500) and marketing costs($500). If you want to go really cheap, you can buy as you grow. If you don't mind a little hard work, the tumbler business is one of the best businesses to start and grow.
How do you epoxy a tumbler without a turner?
0:414:07Hand turning - Application of epoxy without a cup turner - another methodYouTubeStart of suggested clipEnd of suggested clipWith that said all you do is. I usually put my hand inside of my tumbler and I like to tape my endsMoreWith that said all you do is. I usually put my hand inside of my tumbler and I like to tape my ends off. So I'll have my tape on there and then I'll mix my epoxy.
Are epoxy and resin the same?
So, what's the difference between resin and epoxy? Epoxy is a specific type of two-part resin. Epoxy resins are the most commonly used type of resin for crafting and creating art with resin. Because they are the easiest to measure and mix, epoxy resins are what I recommend for resin beginners.
What kind of paint do you use for tumblers?
Stainless steel spray paint is easy and cheap to use! Make your own DIY custom tumblers with any color paint you want.
How to clean epoxy from a cup?
You can also use silicone brushes to gently sweep the epoxy on your cup so that it’s covered evenly. Pour a line of epoxy onto the cup as it’s spinning. Allow the cup to gently sweep your gloved finger as it turns as you move the epoxy with you fingers up and down the cup. Do this until the cup is completely covered.
How long to mix epoxy?
Carefully measure your epoxy into individual cups and pour them both into one cup. Using a craft stick, gently mix your epoxy for a full 3-minutes or according to the package instructions. Be careful not to mix too fast which can create bubbles.
How to make a tumbler with modge podge?
Using the Mod Podge method, paint a layer of Mod Podge on your entire tumbler. Place a piece of parchment or plain paper down on your surface. Liberally sprinkle glitter on the entire cup until completely coated. Mod Podge dries clear. So, if you feel like the glitter didn’t cover well enough, let it dry first.
What happens when epoxy resin is dry?
Once the epoxy resin is totally dry, the tumbler will have a stunning glass-like finish.
Why are epoxy tumbler cups so popular?
Custom epoxy tumbler cups are such a fun DIY craft project. These cups are SUPER-popular right now and you know why? Because the designs are endless and only limited by your imagination!
How to prep a stainless tumbler?
How to prep your tumbler. The stainless tumblers need to be prepped a little before you start painting or adding glitter. Once you have taped your cup, give the exterior a light sanding with sandpaper all over the areas that are exposed.
What do you spray on tumbler cups?
I generally use flat spray paint to spray the exterior of my tumbler cups. Use quick short bursts all over the cup until it’s completely covered.
What Do You Need To Make Epoxy Resin Tumblers?
Like any other DIY task out there, the first thing is to gather all the necessary supplies. In this case, you’ll need the following items;
How to pop air bubbles in epoxy?
After applying resin, pass a hot air gun/ kitchen torch across the spinning cup. This will help to pop air bubbles that may be trapped in the epoxy.
How Long Do You Wait Between Epoxy Coats?
However, there is a certain period you need to wait before you apply another layer. In most cases, that duration can vary from 4 to 24 hours since epoxies are slightly different.
Why do you need a tuner for epoxy tumblers?
A tumbler tuner is one of the most important supplies needed when making epoxy tumblers. This is because epoxy want requires a flat surface, yet a cup is curved. For that reason, you need the cup to keep moving when the epoxy is still wet.
How to smooth out a tumbler?
Spray the tumbler with some water and wet sand it with 180-220 grit sandpaper. This will help to smoothen the surface by eliminating any imperfections on your cup. When the sanding process is complete, treat the surface with a finer polishing compound.
What gloves do you need to use with epoxy?
Nonetheless, it’s always good to be safety conscious when dealing with epoxy. That’s why you need protective equipment like Nitrile gloves and respiratory masks. If you don’t have Nitrile gloves, you can go for alternatives like neoprene or PVC gloves.
How to keep resin from dripping on tumbler?
Using a plastic drop sheet, cover the work surface to protect it from the drips. Dirt may prevent resin from adhering to your tumbler. For that, you need to clean it to get rid of any dirt, including oils and greases.
