How to Mount a TV Without Studs
- 1. Mounting a tv with drywall anchors. Expanding anchors or conical anchors are one of the simplest ways to mount a tv when studs aren’t available. ...
- 2. Mounting a tv with anchors or molly bolts. Toggle anchors and toggle bolts look like regular screws, but they come with a butterfly toggle at the end. ...
- 3. Mounting a tv with a mounting plate.
What is the correct height for mounting a flat panel TV?
[Solution] How High should I Hang My TV For standard seated viewing in conventional rooms, position your TV 42 inches on-center. That way, the center point of the TV sits that far above the floor. ... Increase the height from 42 to 48 or 53 inches on-center if viewing from a home bar. ... Increase the height to 60 inches on-center if you view it more often while standing. This may be the case in a game room where other equipment (e.g. ... See More....
How to mount a flat screen TV to the wall?
- Fixed TV wall mounts keep the television in a stationary position, flush against the wall.
- Swivel TV wall mounts allow the screen to pivot to the left and to the right to accommodate viewing from within a room.
- Tilting TV wall mounts gives you the ability to angle the screen down for better viewing when installed higher on a wall.
How to decorate with a flat screen TV?
Wall Mounted TVs
- Treat It Like Art. Treat a wall-mounted TV like a piece of framed art. ...
- Frame It. For something a little quirky and unusual, you can mount a large picture frame around the TV. ...
- Surround It. Surround a wall-mounted flat screen TV with built-in shelving and cabinets for a custom look. ...
- Unify or Enhance With Color. ...
- Hide Additional Electronics. ...
How to hide the back of a flat screen TV?
How To Hide The TV
- Hide the TV Behind a DIY Painting. If the TV is hung on a fairly large wall (at least twice the width of the screen), then this sliding artwork could ...
- Make a DIY TV Art Cover. Another option for hiding the TV behind a painting is to make a DIY TV art cover. ...
- Buy (Or Build) a Wall Hung TV Cabinet. ...
- Get A TV Lift Cabinet. ...
Can you mount a TV to just drywall?
Can I mount a TV on drywall without studs? Yes, you can use drywall anchor bolts such as toggle anchors or molly bolts. They can hold up to 100 pounds and secure your TV to the wall without needing wall studs.
Do TV wall mounts have to go into studs?
You must screw into studs when mounting a TV on the wall. Do not use hollow-wall anchors, as they cannot support the weight of TV wall mount brackets and the television. Once you've picked an ideal location for hanging a TV on the wall, run a stud finder along the top of the paper.
Can't find studs for TV mount?
If you cannot locate a stud, try tapping a small nail into the wall board near an existing fixture. If it meets resistance behind the wall-board then you have a stud. Wall studs should be spaced in regular intervals (usually 16" on center in the US) so you can simply measure over to your mount area to locate them.
How much weight can drywall hold?
Thin drywall will hold 1.2 to 1.6 pounds per square foot without some type of support. Thicker drywall will hold 1.5-2.1 pounds per square foot without additional support.
How do you mount TV on wall if studs are too far apart?
The first option you can consider is to construct a Plywood mounting plate. This plate will be a suitable piece of ¾-inch thick Plywood that will span across the studs in your wall. Once you've attached the Plywood to the studs, you can then attach the TV mount to the Plywood mounting plate.
Can you mount a 65 inch TV on drywall?
While companies do advertise plastic wall anchors that can help drywall hold significantly more weight than a standard bolt, we do not recommend using these for the kind of TV mount 65 inch televisions would require – as a 65 inch TV is most likely much heavier than even these wall anchors can handle.
Can you mount a 75 inch TV on drywall?
Is it safe to mount your 65 inch, 75 inch or larger TV on the wall? The answer to this is yes, you can mount your XL TV on the wall. Safety is paramount, of course.
How do you hang without studs?
1:094:09How to Hang Heavy Items Without a Stud - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis into the drywall. And it's as simple as drilling. It in when that anchor splits. Your screw isMoreThis into the drywall. And it's as simple as drilling. It in when that anchor splits. Your screw is already to hang a picture on. Next we're gonna get to a series of toggle bolts.
Why is it Important?
Studs are very important elements needed to support the weight of the TV in most cases. They help keep the TV balanced and avoid it from falling or damaging the wall. However, studs are only usually found in drywall structures.
Methods to Install a TV Mount Without Studs
There are several different ways through which you can mount a TV without using a mount.
Factors to Consider
Before you start to mount your TV on drywall without studs, you should consider the following factors to ensure safe mounting.
Type of Mount
VESA patterns are standard measurements that ensure that the mount is compatible with the dimensions of your TV.
How To Install a TV Wall Mount Without Studs - Final Verdict
This concludes our article on how to install TV wall mounts on walls without any wall studs.
Anchors
Assuming that most of the individuals reading this article are not highly skilled handymen, you are most likely searching for the most straightforward, non-headache-causing approach to installing a TV wall-mount without any studs. The easiest way to accomplish this task is to use an Anchor.
Toggle Anchor
Using toggle anchors can be an effective way to hang a TV without any studs. This method will require a hollow wall anchor, which typically resembles a regular screw with a butterfly toggle attached to the end of it. This type of installation pulls on the entire wall as opposed to only the center, which, of course, could cause severe damage.
Molly Bolts
Molly bolts are a good choice for an anchor when executing a no-studs TV mount. These bolts blend ease of installation and strength, with the largest molly bolts available on the market capable of holding up to 50 pounds.
Mounting Plate
A mounting plate can be an excellent choice when attempting to mount a TV without studs inside your walls. Mounting plates are most commonly made out of metal but can also be fashioned out of wood in some cases. This can be extremely helpful to carry the TV’s weight much easier and allows you to add more anchors, making the mount much more secure.
Mount Your TV From The Ceiling
This is not a widely considered option, but hey, it’s still an option if you do not have any studs.
How to tighten a TV bracket?
Use a screwdriver to tighten any remaining bolts. The bracket should be firmly bolted to the TV, without any wiggle room. You may need to use some washers that come with the bracket to get a tight fit.
Where to put mounting brackets on TV?
Put the mounting brackets on the back of the TV , aligning them as stated in your mounting directions. Make sure that the brackets are facing the correct way when screwed to the TV.
How to find studs for a house?
The best way to find the studs is with a stud finder, which you may be able to rent, but they are cheap to buy.
How to install a lag bolt on a wall?
1. Place the mounting bracket on the wall and screw in the lag bolts using a socket wrench or plyers. To assure that it will be level, mount it with one lag bolt and check if it is level. Check if any pilot holes should be re-drilled. Cut two holes in your wall if you want to hide the cords.
How much does it cost to mount a TV to a wall?
In fact, it's relatively easy and inexpensive. A sturdy wall mount need only set you back $50 or $60 dollars.
What hanger to use for fishing wire?
A metal coat hanger works well for fishing wires through the holes.
Why do you mount a TV above a power outlet?
Mounting the TV above a power outlet helps so you don't have to run a new one.
How to hook up a TV to a wall?
Start by choosing a mount that’s compatible with your TV and attach it to your wall. Once you have the mount in place, cut holes in your wall so you can run the wires between the power extender receptacles. After installing the extender, hang the TV on the mount and plug it in! Steps.
How to locate a stud in a wall?
Turn on your stud finder and hold it flat against your wall. Slowly slide the stud finder horizontally across your wall until it beeps or a light blinks. Mark the location of the stud with a pencil before moving the finder over by about 16–18 inches (41–46 cm) so you can locate another stud.
How to put toggle bolts in a hole?
Slide 1⁄4 in (0.64 cm) toggles bolts into the holes if you don’t have stud s. Toggle bolts are hollow fasteners that have hinged ends to hold them securely against the back of the wall. Pinch the hinge closed so it’s against the main body of the toggle bolt and slide it through the hole. Push the small plastic ring on the front of the bolt so it’s flush with the wall before snapping off the long plastic piece extending out. Put toggle bolts in the rest of the holes.
How to drill holes in a wall?
If your wall has studs, use a drill bit with a diameter 1⁄8 inch (0.32 cm) smaller than the diameter of the screws provided with the mount. If you don’t have studs, choose a bit that’s 1⁄4 inch (0.64 cm). Hold the drill so the bit is perpendicular to the wall and slowly bore holes through each of your marks.
What to do if you don't have a stud finder?
If you don’t have a stud finder, try knocking on your wall and listen for a solid sound, which means there’s a stud behind it. If you hear a hollow or echoing sound, then there isn’t a stud.
How to mark holes in a wall mount?
Hold the mount against the wall to mark the holes. Take the section of the mount that attaches to your wall and hold it against the wall so it’s perfectly level. Use your nondominant hand to support the mount and find the holes along the top and bottom that line up with the studs.
How to find TV model number?
You can usually find the model number on a sticker on the back of the TV or printed on the box. If your TV is lighter than 80 pounds (36 kg), you can use a mount that attaches vertically. If your TV weighs more, you’ll need a mount that secures horizontally so it evenly distributes the weight.
