For fluorescent light fixtures that hang from a chain, you'll drill eyelets into the ceiling studs rather than screws. Use an eyelet drill attachment or start the eyelet by hand, pass a screwdriver through the eye, and use it as leverage to turn the eyelet clockwise until all the threads have sunk into the stud. Then, use S hooks to attach the chains to the eyelets.
How do you install a fluorescent light fixture on the ceiling?
Your fluorescent light fixture will now look perfectly in line with the walls. With the position of the screw holes marked on the ceiling, it's time to put on safety goggles and drill pilot holes. You may want a helper to hold the fluorescent fixture flush with the ceiling while you drill in the screws.
How do you turn a fluorescent light fixture on a chain?
If the fluorescent light fixture hangs from a chain, you can drill into the ceiling studs instead of screws. If you want to turn the eyelet clockwise, pass a screwdriver through the eye, and use the drill attachment to start the eyelet. How do you attach a light fixture to a chain?
How do you suspend a light fixture from the ceiling?
The fixture can be suspended from the hooks with a small link chain. The fixture should be held against the ceiling. Just through the ceiling is where you can drill your holes if you use a toggle bolt. The fixture needs to be screwed up. What is suspended lighting?
How do you hook up a fluorescent light to a stud?
Use an eyelet drill attachment or start the eyelet by hand, pass a screwdriver through the eye, and use it as leverage to turn the eyelet clockwise until all the threads have sunk into the stud. Then, use S hooks to attach the chains to the eyelets. Some fluorescent lights are designed to be plugged into an outlet.
How to hang a chain on a fluorescent light?
Where to attach S hooks to a chain?
About this website
Can fluorescent lights be hung vertically?
They can be hung vertically or horizontally and are quite versatile.
How do you install a 4 foot fluorescent light fixture?
0:071:57How to Install 4 Foot Fluorescent Tube Bulbs - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you have to roll it. Because if you do not take the ends up correctly. And you take them inMoreAnd you have to roll it. Because if you do not take the ends up correctly. And you take them in sideways you'll chip the ends of these tube holders. These tube holders get very brittle.
What holds a light fixture to the ceiling?
Fixtures usually come with a new mounting strap - a strip of metal that screws into the junction box in the ceiling. You can often use the existing strap, but if not, unscrew the old strap and screw the new strap in place.
How do I remove a fluorescent light fixture from the ceiling?
Removing A Large Fluorescent Light FixtureStep 1: Turn Off The Power. ... Step 2: Remove the Plastic Shade & Light Bulbs. ... Step 3: Detach The Metal Panel. ... Step 4: Disconnect Wires In The Old Fixture. ... Step 5: Unscrew The Fixture Box & Remove It From Your Ceiling. ... Step 6: Spackle Holes & Paint The Area.
How do you install a hanging fluorescent light fixture?
Use a small-link chain to suspend the fixture from screw-in hooks or eyelets. Otherwise, hold the fixture against the ceiling in the designated mounting location. Drill your holes into the ceiling and the studs or, if using toggle bolts, just through the ceiling. Screw the fixture to the ceiling.
Do I need to remove the ballast to use an LED bulb?
An LED light does not require a ballast because it uses a component called a “driver” to regulate the power going into the bulb.
What is the piece called that holds the light bulb?
A lightbulb socket, lightbulb holder, light socket, lamp socket or lamp holder is a device which mechanically supports and provides electrical connections for a compatible electric lamp base.
What is a light called that hangs from the ceiling?
Pendant LightWhat is a Pendant Light? Pendant lights, sometimes called suspender or drop fixtures, are single, standalone lighting accessories that generally hang from your ceiling while suspended from a cord or chain.
What is a fancy light that hangs from the ceiling called?
A pendant light, sometimes called a drop or suspender, is a lone light fixture that hangs from the ceiling usually suspended by a cord, chain, or metal rod. Pendant lights are often used in multiples, hung in a straight line over kitchen countertops and dinette sets or sometimes in bathrooms.
Can you change a fluorescent light fixture to a regular light fixture?
Homeowners who consider their old large fluorescent lights to be outdated can replace them with a new and more stylish incandescent lights. Replacing a florescent light is a little more involved than replacing other types of light fixtures because you may have to repair the ceiling before you can install the new unit.
What is under a fluorescent light fixture?
The ballast – which regulates voltage, current, etc. and is necessary for a fluorescent bulb to light – feeds the electricity into the pins of the fluorescent bulb on both ends.
How do you get a lightbulb out of a high ceiling?
What Are My OptionsBulb Grabber-typically used when ladders or scaffolds aren't available. ... Tall Ladder-you can rent a ladder that is 16 feet tall. ... Pole Hooks or Ladder Hooks-these are used to attach to a platform.More items...•
Do fluorescent light fixtures need a junction box?
That depends on the fixture. If there is an installation manual for the fixture, it should show if a junction box is needed. Check the back/side to see if it has a opening where you can connect a cable or conduit to the fixture. Generally having a junction box makes the installation easier to do.
Where does the yellow wire go on a ballast?
The common yellow wires connect from the ballast to push-in connectors on one of the right holders of lamp 1 or 2. Two yellow wires connect the common lampholders together.
Where does the red wire go on a ballast?
The ballast has a hot and neutral wire at one end to receive power, and two blue wires a red one at the other end to supply power to the lights.
How do you change a fluorescent light fixture with an LED fixture?
There are various methods for converting fluorescent lighting fixtures into LED ones. However, the simplest way is to use some sort of retrofit kit. These kits attach to already existing lighting fixtures and allow for LED bulbs to be housed in them.
How to install a fluorescent light fixture to the ceiling - Quora
Answer (1 of 3): Assuming there is already a wired outlet on the ceiling: Switch off lighting circuit at DB. * Get an assistant to help, with 2 A-frame stepladders * CONCRETE CEILINGS: * Line up the cable-entry hole at the top of the fitting, so that the 3/16″ screw holes in the ceiling box ...
How to Hang a Fluorescent Light - helpfulhandymanhints - Google
Hanging your own fluorescent light fixture is an easy to install fixture in just about any room with attic access. In this article I’ll show you how to hang a fluorescent light fixture from an existing circuit.
How to convert a shop light to a shop light?
To convert a single fixture light to a shop light that's hardwired, you'll need to connect the existing wires to the fixture's wires. Call a licensed electrician to complete this step . Also, call a pro if there are no existing wires or switches where you want to install a hardwired fluorescent light fixture.
How to turn an eyelet clockwise?
Use an eyelet drill attachment or start the eyelet by hand, pass a screwdriver through the eye, and use it as leverage to turn the eyelet clockwise until all the threads have sunk into the stud. Then, use S hooks to attach the chains to the eyelets.
Can fluorescent lights be plugged into an outlet?
Some fluorescent lights are designed to be plugged into an outlet. A ceiling-mounted outlet is ideal so that you do not have to awkwardly position the cord or use an extension cord. If needed, keep the cord tucked out of the way with cable staples.
Do fixtures cover wires?
Some fixtures cover the wires with a decorative panel. These typically snap into place, but other models will be held on with screws.
Do you have to be comfortable with electrical wires before hanging fluorescent lights?
You should be comfortable with electrical wires before hanging fluorescent light fixtures.
What are the different shapes of fluorescent lights?
Most warehouse or industrial applications use large rectangles, while residential fixture shapes include rectangular, square and round in a variety of sizes.
Do you have to turn off the power before connecting a light fixture?
If you will be connecting the light fixture's wires to your building's wires, be sure to turn off the power at the circuit breaker before you begin .
Can fluorescent light fixtures be mounted into the ceiling?
Fluorescent light fixtures tend to be rather heavy; if you cannot locate a stud, the fixture should be mounted into the ceiling using toggle bolts. Do not use wall anchors, as they are intended for horizontal applications and are likely to pull out of the ceiling if used.
How do you secure a hanging light fixture?
If you have to, remove the packaging and put the bulb in the sockets. Attach the lamp shade to the bulb and connect it to the cord. You can hang the cord from the hook or anchor if you want the lamp to sit at a certain height. Plug the light in, then hide the cords if you want to.
How do you attach a fluorescent light to a chain?
If the fluorescent light fixture hangs from a chain, you can drill into the ceiling studs instead of screws. If you want to turn the eyelet clockwise, pass a screwdriver through the eye, and use the drill attachment to start the eyelet.
How do you suspend a fluorescent light fixture?
The fixture can be suspended from the hooks with a small link chain. The fixture should be held against the ceiling. Just through the ceiling is where you can drill your holes if you use a toggle bolt. The fixture needs to be screwed up.
What size are ceiling boxes?
You should be aware that ceiling boxes come standard in 3–1/2″ and 4″ diameter nominal sizes. It appears that cover plates with outlets only come in 4″. If you have a 3–1/2″ box you will have to “fashion” an adaptor. This goes beyond most homeowner DIY fixes and will not be technically to Code so I’m not going into it.
How to measure butterfly wings?
Measure the width across a butterfly's closed lever ‘wings', say M12, then mark and drill this diameter, marking as described above.
Can you break a fluorescent tube?
There is one other useful thing that you should consider when you’re thinking about removing a cover though - how likely are you to accidentally break the tube? Fluorescent tubes are pretty fragile things, and it doesn’t take much to break one into a million tiny pieces that you’ll be finding everywhere for months or years to come. Even the flimsiest plastic diffuser on an indoor fitting will provide a bit of protection from accidental contact.
Do you need a ground wire for a ceiling box?
You will, of course, have to provide the proper ground connection for your new outlet. Hopefully your ceiling box is provided with a bare copper ground wire.
Can plaster board be fixed to the ceiling?
This depends on the type of fixture, the type of ceiling and off suspended or fixed direct to the ceiling, I'll assume its a straight tube type and plaster board (rock board) ceiling, can be fixed directly to the ceiling using the slotted holes provided ideally into a ceiling joist or can be suspended on suspension chains, the fittings usually have raised hook holes for this purpose.
Do Fischer plugs work on cross beams?
As these ceilings are hung or nailed onto rafters and cross-beams, Fischer-plugs or rawl-bolts won't work, as there's nothing to grip against - no hole ‘walls', soooooo…
Do you have to cover fluorescent lights?
I can only answer from a British perspective, but there’s no obligation to have a fluorescent light covered. I presume you’re talking about some sort of frosty-type glass or plastic cover like this one?
How to hang a chain on a fluorescent light?
Measure the distance between the holes on the top of your fluorescent fixture, get on your ladder, mark out that same distance with two dots on the ceiling where you'd like to hang the chain.
Where to attach S hooks to a chain?
Attach the S-hooks to the bottom of the chains.