How to Hide Electrical Cords
- Bundle the cords with the cable ties and snip off the ends as needed.
- Measure the length of the cords you want to conceal. Measure and cut the flex tubing to match the length. Cut the tubing lengthwise.
- Pull the tube apart and wrap around the wires that were tied together.
- Use a stud finder to find a spot between two studs in the wall. Mark the wall where you want the upper and lower holes to go. ...
- Attach a drywall hole saw bit to a power drill. ...
- Insert the cord or cords through one of the hole covers. ...
- Insert the hole covers and push firmly into place.
How to hide TV wires on a wall?
Method 3 of 3: Installing an In-Wall System
- Know local and national electrical codes for installing cables in the wall. ...
- Purchase an in-wall power kit to hide wires in the wall. ...
- Drill two holes in the wall to hide and route the wires. ...
- Bundle the cords together and route them through the new holes. ...
What is the best way to hide the power cord?
- Use a stud finder to find a spot between two studs in the wall. Mark the wall where you want the upper and lower holes to go. ...
- Attach a drywall hole saw bit to a power drill. ...
- Insert the cord or cords through one of the hole covers. ...
- Insert the hole covers and push firmly into place.
How to hide screws on Wall?
Paintable Caulk
- Load a caulking gun with all-purpose paintable caulk. Slide the plunger on the caulking gun back until it clicks and locks in place. ...
- Squeeze a small bead of caulk over the screw head.
- Use a rubber-gloved finger to smooth the caulk surface and allow the caulk to dry, usually within an hour.
- Apply primer and paint to hide the screw head.
How to hide electronic cords around the House?
Method 1 Method 1 of 2: Hiding Cords Behind Objects Download Article
- Hide the cord behind furniture. One of the easiest ways to hide an electrical cord is by positioning it behind furniture.
- Place the cord behind a secondary baseboard. If you need to hide cords that are close to the floor, try creating a secondary baseboard in front of your existing ...
- Try taping the cord. ...
- Feed the cord through the wall. ...
How to hide an electrical cord?
How to protect electrical cords from unsightly cords?
How to keep electrical cords out of sight?
How to stop a tangled wire from tangled?
Can you hide the electrical cord between two baseboards?
See 2 more
About this website
How do you hide a plugged cord?
8 Genius Ways to Hide Every Wire in Your HomeHook cords to the back of your furniture. ... Corral cables behind the couch. ... Hide TV wires in plain sight. ... Run TV wires inside the wall. ... Tuck cord chaos into tubing. ... Slip them into a drawer. ... Snake them through baseboard accessories. ... Stash wires and routers in “books.”
How do you hide cords without cutting a wall?
0:000:55How to Hide TV Cables Without Cutting the Wall - YouTubeYouTubeStart of suggested clipEnd of suggested clipHold it up to the wall find your cable. Make sure it's clipped into place. And attach it to the wallMoreHold it up to the wall find your cable. Make sure it's clipped into place. And attach it to the wall. You can also paint this the exact same color as your wall. So your cables virtually disappear.
Can you hide TV power cord behind wall?
There are two basic ways to hide TV wires: on the wall or behind the wall. The simplest approach is to conceal the wires on the surface of the wall by running them inside something called a raceway, which is nothing more than a shallow channel that mounts directly to the wall.
How do you hide a power strip and cord?
The easiest way to hide a power strip is to obscure it behind furniture. Set the power strip behind the TV stand, desk, or sofa that it's next to. Simply slide your furniture out a few inches to give the power strip some space for air flow and keep it from resting directly against any furniture.
How do you hide cords on a wall mounted TV?
Wire It Through the Wall One of the most popular ways to hide cords on a wall-mounted TV is to put them inside the wall directly behind your TV.
How do you make a homemade TV wall mount?
1:285:20How to make CHEAPEST FLATSCREEN TV WALL MOUNTYouTubeStart of suggested clipEnd of suggested clipSo after you have your piece of wood cut the length what we want to do next is we want to cut thisMoreSo after you have your piece of wood cut the length what we want to do next is we want to cut this into two pieces. So make a mark and cut right down the center at a 45 degree angle.
How can I hide electrical cords in living room?
Add Some Area Rugs. ... Hide Cords Under Furniture. ... Move Cords Under the Floorboards. ... Add Some Cord Protectors. ... Run Electrical Cords Along Your Walls. ... Clip Cords to Your Baseboards. ... Get Some Power Strips. ... Hide Electrical Cords In Baskets and Boxes.More items...
Can you put an extension cord behind a wall?
Extension cords are not designed or made for use inside a wall or ceiling, not even heavy-duty types, due to National Electrical Code restrictions, as listed above, specifically regarding the non-use of flexible cords cable.
Can you put TV power cable in wall?
Can the TV power cord or an extension cord be run inside the wall? No, not worth the risk. It is against the National Electrical Code to connect extension cord wiring through a hole or opening in a wall, inside a dropped ceiling or under flooring.
How do you make cords look neat?
Fasten Cables to Walls With Coaxial Cable Staples. ... Guide Cords Along Delicate Surfaces With Command Strips. ... Secure Bundles of Cables With Zip Ties or One-Wraps. ... Use Painter's Tape in a Pinch. ... Set Up Enough Power Strips. ... Label Your Cords. ... Use Bread Bag Tags if You Don't Have a Label Maker. ... Store Unused Cables in a Shoe Rack.More items...•
How do you hide a power strip in a bedroom?
To hide away the usual power strip mess, use nails or command strip to mount the power strip in a drawer, box, or even to the back of your furniture.
How can I hide electrical cords in living room?
Add Some Area Rugs. ... Hide Cords Under Furniture. ... Move Cords Under the Floorboards. ... Add Some Cord Protectors. ... Run Electrical Cords Along Your Walls. ... Clip Cords to Your Baseboards. ... Get Some Power Strips. ... Hide Electrical Cords In Baskets and Boxes.More items...
How do you hide electrical cords on hardwood floors?
How to Hide Cables on Harwood FloorsFLOOR CORD COVERS. These tough cable protectors may be made of PVC, but they have cleverly disguised themselves as wood grain. ... RUBBER DUCT & CABLE PROTECTORS. ... FLEXIDUCT CORD COVERS. ... NEOPRENE FLOOR CORD CONCEALER & PROTECTOR. ... THE CABLE SHIELD.
How do I hide the wires on the side of my house?
You can hide your cables along outdoor walls by matching them or their covers to the wall color or simply run them behind the walls themselves. What is this? Even if your wires are covered, don't let your guard down by using any old wire or extension cord. Make sure that whatever wires you are using are waterproof.
How do you hide electrical cords on carpet?
Hide them under area rugs If you are concerned about a tripping hazard in your living room, an area rug is a perfect place to help hide your cable wires. Simply run your cables underneath the rug and tape them down with a little carpeting tape to secure them in place.
How to Hide Electronic Cords Around the House | Martha Stewart
There are many ways to hide electronic cords within, under, or behind your furniture, notes Newman. To tackle laptop and phone wires, install power strips to the underside or back of your desk—or even onto the wall behind your desk, she says.Another option?
How to Hide Cords Against Baseboards | Home Guides | SF Gate
How to Hide Cords Against Baseboards. The addition of a new appliance, computer accessory or sound system component usually brings with it a cord that must be connected to an electrical outlet.
How to cover a cord on a wall?
Cut the cord cover to the desired length, using a utility knife. Snap the cover over the cord, then remove the sticky backing. Press the cover against the wall. Paint the cord cover if it does not match the wall color, if desired.
How to get power cords out of a shelf?
Run all the cords and cables through the shelf, then down along the wall in an inconspicuous area to reach an outlet.The shelf option comes in handy if several devices have dangling cords. Stash a power strip inside the shelf to cut down on the number of cords on the wall.
How to make a desk lamp a power cord?
Position furniture so it sits as close to an outlet as possible. Clip several binder clips along the back edge of the desk or table as a cable run for power cords. Feed the cords from a desk lamp, computer or electronics through the binder clips . Allow the cords to dangle along the back of a desk or table leg.
How to make a cord cover?
Craft a fabric cord cover from a decorative scrap of material that matches the room's decor. Cut a long, narrow strip up to 2 inches wide. Set the cord into the middle of the strip, lengthwise, with the fabric pattern facing downward. Fold the fabric over, creating a pocket for the cord. Stitch the sides of the fabric together to make it into a sleeve, with the cord inside. Alternatively, craft a reusable cord cover. Stitch hook-and-loop tape onto the seam so the cover may be opened and closed.
What is clear cord loop?
Clear cord loops offer a universal option, or opt for a color matching the walls or trim for camouflage. Some removable power cords can be replaced with a similar cord in a different color, which may help make the cord less visible against the wall. Writer Bio.
What are eye hooks used for?
Eye hooks can be used in place of binder clips. However, eye hooks will leave small holes in the furniture. Cord loops are a closed, C-shaped pieces of plastic that flex to allow a cord to be placed inside. They have tabs with holes that allow the device to be secured to a structure with screws or tacks.
Where to run power cords?
Run power cords as close to a door frame, alcove, corner or piece of trim as possible. Secure the cords in place with cord loops screwed into the wall or the trim.
What do nail in cable clips do?
If you have an awkwardly positioned outlet and a cable, these nail-in cable clips will keep your cables to the wall while being decorative to the room interior. If there is no chance to hide it, make something creative and visually pleasant.
Can you make a cord into a cloth cord?
You can turn any cord into a vintage-style cloth cord with a skein of yarn and some DIY skills. If you have an awkward cable that can’t be hidden, pick a vibrant color and cover it with this technique’s help. It is also a great way to create a cord for a minimalist bare bulb pendant.
How to hide cords on furniture?
Use the hooks or cord holders to guide the cords down the back of the furniture legs so that you don’t see cords hanging.
How to hide electrical cords in wicker basket?
Baskets with handles strategically placed around your home are a great way to hide electrical cords. Wicker baskets that have open handles built into them allow you to slip the cords through the handles and leave the bulk of the wires in the basket, allowing them to be out of your sight line for the most part.
How to charge a nightstand with a surge protector?
Feed the cord of a surge protector or power strip through the hole and use double-sided adhesive to attach the power strip to the back of the drawer, with the outlet openings facing forward. Then, use drawer dividers to keep your devices organized as they’re plugged into the drawer to charge. It’s also useful to drill a hold in the back of a nightstand drawer to keep cords for chargers out of sight.
What is cord channel?
Cord channels are an easy and convenient way to disguise cords that would otherwise be running across your floors. This solution works particularly well for things like lamps or other larger appliances. These are meant to run along your baseboards and cover cords, tucking them close to the edge of the room and blending in with the baseboards. These can be purchased at your local hardware store and are self-adhesive, featuring hollowed out middles to house the cords. These are easily stuck directly onto your baseboards, making installation a breeze.
How to wind up wires that have slack?
Use binder clips to wind up wires that have excess slack, allowing you to tuck the bundle of them behind furniture or discreetly under a curtain.
When will electric cords be required?
on Aug 18, 2020. Electric cords are a necessity in any home, but that doesn’t mean you have to like the way they look. Luckily, there are an abundance of ways to hide these unsightly cords.
How to make a charging drawer?
Instead of having your various devices on the counter or on a table charging with their respective cords exposed, create a charging drawer. Use a hole saw bit attachment on your drill and create a hole in the back panel of the drawer you’re using for this project. Make sure the drawer is located near an outlet.
How to hide cables in a wall outlet?
1. Hide your cables in a box. Place a decorative box on a shelf just under the cables. Gather the cables together and close the box to hide them. You can also cut a small hole in either side of the box and feed the cables through this hole to the wall outlet to conceal them.
How to hide cables on a TV?
You can buy frames meant to be fitted around a TV at a local craft or department store. If you place the frame around the TV and then feed the cables behind the TV stand , this can help hide some of the cables.
How to put a cable cover on a sandbox?
Conceal the cables and snap on your cover. Place all the cords inside the base. Then, place the cable cover over the base. Push down lightly with your hands to snap the cover in place.
What to do if cords don't detach?
If they don't detach, move the device close enough to the wall that you can feed the cords through.
How to attach a cable cover to a wall?
The base should be marked and will also have small holes running along either side where you apply screws. Use one hand to hold the base of the cable cover against the wall, following in the direction of the line you drew. Use a screwdriver to attach the screws to each hole in the cover.
How to trace cable plate?
Trace the outline of the cable plate with a pencil. Remove the cable plate from its packaging and press it against the wall where you want to install it. Use a pencil to trace the outline of the cable plate.
How to hide pictures on a cable?
If you don't have room for a buffet or table near the cables, use some pictures or paintings. Take some pictures or paintings and hang them over the cords to hide them.
What Comes In the TV Cord Hiding Kit?
Corrugated plastic tube with connected outlets, cover, long extension cord, hole saw bit for a power drill, wire snake, paper template
How to place plugs in wall outlet?
When you decide where to place the holes in the wall you should get the lower one as close to an existing wall outlet as possible. After the tube and cords are pulled out of the bottom hole, depending on how close a wall outlet is , you simply plug the plugs into the wall outlet . The wall outlet in my room was low on the wall and is hidden by the table.
Can you plug in a power strip with more than two outlets?
If you have more than two plugs, (normal outlet) you can plug in a multi-outlet power strip. I have this on the table.
Do TV cord hiding kits have flexible tubes?
Update: Most newer TV cord hiding kits being sold today, do not have a flexible tube to hold the wires anymore. If you have a lot of cables and wires hooked up to your TV make sure to look for a kit that has larger holes for the cables and wires to go in and out of easily.
How to hide power strips?
Power strips are another designer. To hide away the usual power strip mess, use nails or command strip to mount the power strip in a drawer, box, or even to the back of your furniture . Charging our devices is a necessity, but with this style hack, watching the process doesn’t have to be.
Can you paint a cord down a table?
Instead of letting them hang limp, tape or velcro the cord down a leg. You can even paint the cord the same color as the furniture to disguise it further. While the cord is still there, it’s much less of an eyesore.
Can you paint a cord on an artificial light?
Power cords are especially necessary for artificial lighting. But, that random cord running off of every end table, side table, and shelf can be irritating. Instead of letting them hang limp, tape or velcro the cord down a leg. You can even paint the cord the same color as the furniture to disguise it further.
How to hide TV cords without cutting the wall?
1. Make a Wood Frame and Cover It in Fabric. It’s a creative way to hide TV cords without cutting the wall, however, you have to choose the fabric wisely. You want it to fit the wall color and the furniture in the room.
How to mount wires to wall?
Before mounting the wires, draw an outline on the wall with a pencil that can be erased easily. Measure the length of the cords (you can easily do that with a string) and plan the artwork accordingly. You can mount the wires to the wall with wall clips or mounting tape.
Why do I hide TV wires in my living room?
The main reason I decided to organize and hide TV wires in my living room was that I simply didn’t like the way they looked. They were ugly.
What happens if you don't have a TV stand?
If you don’t have your TV mounted on the wall and you use a standard TV stand, chances are great that there’s a jungle of wires behind the stand. To organize and hide the cluttered cords, first, you have to shorten each of them individually to the length you need.
What are the disadvantages of using a cable trim?
Its major disadvantage is that the cables are not so easy to access under the trim work if you need to remove or add one in the future. That’s why I only recommend this method if you’re willing to spend some time disassembling the trim work each time you add or remove a new device to your TV set (or if you don’t want to change your set anytime soon).
How to cover cords on TV?
Place some home decoration items, picture frames, plants or books under the TV and position them so that they cover the cords. Make sure you don’t just put the items randomly below the TV. They should look natural and blend in the environment. That’s all.
What can you make with cords?
You can create anything from an abstract image to a silhouette of a city, object or person. If you want, you can decorate the cords with color tapes, ribbons or stickers to resemble flowers with leaves or anything else you like. Also, you can hang some postcards or giant letters. The only limit is your imagination.
How to hide an electrical cord?
1. Hide the cord behind furniture. One of the easiest ways to hide an electrical cord is by positioning it behind furniture. Try hiding an electrical cord behind a desk or dresser. You can also easily hide an electrical cord by positioning it behind a bookcase. TV equipment can be placed inside of a cabinet, for instance.
How to protect electrical cords from unsightly cords?
Use a surge protector that disguises cords. You can purchase a surge protector that also houses unsightly electrical cords. Try using a surge protector with cord storage. Mount it on the wall under a television, computer, or other appliance that is wrought with unsightly cords.
How to keep electrical cords out of sight?
Keep cords out of sight with a binder clip. If you need to corral multiple electrical cords, try attaching them together with a binder clip. You can then hang the binder clip on a nail, screw or hook that is in an inconspicuous place, like the back of a piece of furniture. Expert Q&A.
How to stop a tangled wire from tangled?
1. Try cord clips. A cord clip can help prevent a tangled mess of cords and wires. You can purchase cord clips at your local hardware store or online. Try affixing the cord clips to the back of a table or desk. Then position the electrical cord in the clips.
Can you hide the electrical cord between two baseboards?
You can then hide the electrical cord between the two baseboards. For example, you can create a secondary baseboard that looks like a white picket fence, position it in front of your existing baseboard, and hide the cord between the two baseboards.
