How to Hang a Floating Mantel From a Stone or Brick Fireplace
- Figure out exactly where it’s going Take some time to carefully plan where (and how) you want to hang your mantel. ...
- Drill sleeve holes ...
- Insert sleeves and drive lag bolts ...
- Align holes on the back of the mantel ...
- Install the mantel ...
How to install a rustic fireplace mantel?
Rustic Beam Mantel and Corbels
- Picking Your Wood. Repurposed wood comes in all shapes and sizes. ...
- Hollowing Out the Back of the Beam. After getting the beam to the correct size (note: I have not sanded to finish), I then started prepping the mantel ...
- Filling in the Holes. ...
- Creating the Corbels. ...
- Finish the Beam. ...
- Installing the Beam. ...
- Did you make this project? ...
How to hang a floating wall mantle?
A floating wall mantle can be an excellent addition to your room or fireplace. Follow the simple steps below to effectively hang a floating mantle on your own. Step 1: Mark Line . Place the mantle against the wall where you want to fix it, and then draw a line on the wall to mark the location.
How to install fireplace mantel with hidden bracket?
- Remove the old mantel
- Add support by drilling holes for lag shields, then install lag bolts into the brick
- Measure carefully and drill corresponding holes for the wood mantel
- Push the wooden mantel carefully into place using wood glue for extra support
- Caulk the seam and allow time to dry before using
How to install a reclaimed wood mantel?
Steps for Using a Reclaimed Beam as a Fireplace Mantel:
- Measure approximately 55-56” off the floor, this is the average mantel height. ...
- Use joints of bricks to mark the center of the fireplace. ...
- Find the center of the fireplace using the mortar lines.
- From the center mark, measure out to the mortar line that is closest to 16” on each side.
- Next, make sure all marks are level.
How do you secure a floating mantel?
2:374:43How to Install Floating Shelves and Mantel | This Old House - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow. So a little different technique. Yeah just to clean that's a big cleat. So we have a lot ofMoreNow. So a little different technique. Yeah just to clean that's a big cleat. So we have a lot of mantle to hold up so what we did was we we cut out the back of the poplar.
How do you attach a mantle to a stone fireplace?
How to hang a wood beam mantel on stone fireplaceDrill a hole in the stone fireplace using a mason drill bit.Cut the rebar to size.Fill hole with Fuz It (liquid nail)Insert the rebar into the hole on the stone and hold in place to allow liquid nail to grab rod.Allow to dry for 48 hours before hanging mantel.More items...•
Do you install mantel before or after stone?
If you'd like to have a mantel, it is ideally installed in conjunction with the stone veneer so this decision should be made along with the selection of your stone.
How do you attach a floating mantel to Brick?
Remove the old mantel. Add support by drilling holes for lag shields, then install lag bolts into the brick. Measure carefully and drill corresponding holes for the wood mantel. Push the wooden mantel carefully into place using wood glue for extra support.
How do you secure a stone mantel?
Drill holes through the cleat and into the fireplace using a masonry drill. Hammer the wedge anchors into the holes and then tighten them in place using a socket wrench. With the cleat secured to the fireplace, slide the mantel onto the cleat. Secure the mantel to the cleat using brass screws.
How do you attach a heavy mantle to a fireplace?
2:553:53How to Install a Fireplace Mantel - YouTubeYouTubeStart of suggested clipEnd of suggested clipI get to do more than just hold the bracket for Shawn I drilled the screws through the wood thenMoreI get to do more than just hold the bracket for Shawn I drilled the screws through the wood then through the metal. And into more wood for a nice secure hole.
How many inches off the ground should a mantle be?
Mantel Height The recommended height of the mantel is 54 inches, or 4.5 feet, off the floor. Additionally, the housing code requires that the distance between the bottom edge of the mantel and the top edge of the fireplace box should be at least 12 inches.
How far off the ground should a fireplace mantel be?
Mantel Height: We recommend installing the mantel 4.5' from the floor. This allows room for stockings during the holidays. Most housing codes and the National Fire Protection Agency (NFPA) state that the bottom of the mantel must be at least 12” away from the top of the fireplace box.
How much overhang should a mantle have?
A mantel should extend a minimum of 3 inches beyond the firebox opening. If the fireplace has facing around the opening, the mantel can also extend 3 or more inches beyond that.
Can you glue a mantel to brick?
A safe effective adhesive/sealant solution is now accessible CT1, the eponymous adhesive/sealant from the manufacturer of a family of successful adhesive and sealant products to the Construction Industry is the ideal solution for fixing a wooden mantel to a brick fireplace.
How thick should floating mantel be?
A depth of 7 inches is ideal for most mantels, as it allows plenty of room to accommodate decorative objects. Keep in mind that the top and the sides of the mantel should be the same depth.
Can you put a mantle on a brick fireplace?
A wooden mantel can be securely mounted to a brick fireplace in an afternoon using common hand-operated tools. Wood designs are the most popular because of their natural decorative appeal and ability to blend with varying room ambiances.
How do you install a mantel on a masonry fireplace?
0:134:57How to Install a Mantel Over a Brick Fireplace | Easy DIY ProjectYouTubeStart of suggested clipEnd of suggested clipStart by drilling a pilot hole and then fastening it with the recommended fasteners. Take care toMoreStart by drilling a pilot hole and then fastening it with the recommended fasteners. Take care to ensure that your brackets are level across all directions before proceeding with the additional.
Can I glue a wood mantel to brick fireplace?
CT1, the eponymous adhesive/sealant from the manufacturer of a family of successful adhesive and sealant products to the Construction Industry is the ideal solution for fixing a wooden mantel to a brick fireplace.
How do you install a mantel on an existing fireplace?
Slide Over Bolts MethodLocate the studs behind the brick, stone, or faux veneer.Drive 1/2in lag screws through each of the studs. ... Have a helper support the mantel while you mark the location of the support rods on the back of the beam. ... Apply construction adhesive into the holes. ... Slide into place, admire, and enjoy!
Can you add a mantel to a tile fireplace?
If you plan on installing a mantel to help complete your fireplace surround, you will need to do so over the tile facing. Because tile is a hard, durable covering, take additional steps to ensure the mantel is properly secured and mounted into place.
How to mount a mantel above a fireplace?
Step 1. Hold the mantel above the fireplace at the height you wish to mount it, at least 6 inches away from the firebox. Place a level on the mantel and adjust the mantel so it sits straight. Ask a friend to trace along the top of the mantel, then set the mantel aside.
How long does it take to install a floating fireplace mantel?
Even a novice do-it-yourself homeowner can install a floating mantel within a few hours.
Who is Elizabeth Knoll?
Elizabeth Knoll has been writing full-time since 2008. She has a deep love for gardening and has spent a vast amount of time researching that subject. Her work appears on various websites. Knoll received a certificate in Early Childhood Education from Moraine Park Technical College.
How to Install a Heavy Wood Mantel?from runtoradiance.com
Your brick or stone fireplace is more than capable of holding the weight of a heavy wood mantel. Here are a few additional tips to help you install a heavy wood mantel:
How to add support to a brick wall?from runtoradiance.com
Add support by drilling holes for lag shields , then install lag bolts into the brick
Why are lag shields important?from runtoradiance.com
The Lag shields were also important to have because once they are placed in the predrilled hole, a lag bolt is able to slip inside of them and be tightened, ensuring that they won’t fall out when a heavy wood mantel is installed on it.
How high should a fireplace mantel be?from runtoradiance.com
54” above the hearth is the standard height for a fireplace mantel, but how high you hang a fireplace mantel will vary depending on your fireplace and your personal preferences.
How to soft mount a bracket?from shelfology.com
This usually requires another person to help hold it up. To soft mount, position the bracket along the level line and in the right place left to right, lining up with as many studs as possible.
Can you put floating mantels on brick fireplaces?from runtoradiance.com
Once you have your supplies gathered, it’s time to get your floating mantel DIY on. Let’s do this! Keep in mind, this tutorial is specifically for how to install a floating mantel on a brick fireplace, but the techniques could be used for another type if you alter the directions.
1. Decide Installation Place
Before installing the mantel for stone fireplace, you need to decide where you will place it. First, with a stud finder, find the studs in the wall so that you can avoid drilling them. Make sure to attach the mantel 50” – 60” above the floor and on the center of the wall.
2. Drill Holes on the Wall for Placement
Now wear safety goggles and start drilling holes on the stone wall by using an electric drill with a masonry bit. The number of holes that should be drilled depends on the length of the mantel. Each hole should have a 10’’ distance, and they should be lined perfectly.
3. Fill the Holes
To properly install a floating mantel on the stone fireplace, now insert the lead sleeves that will hold the lag bolts, in the holes of the wall. Next, place the lag bolts inside each sleeve and tighten them firmly, so that they can hold the mantel securely without making it fall.
4. Drill Holes on the Mantel
After placing the lag bolts, next, you need to prepare your mantel by drilling holes in them. According to the placement of the lag bolts, mark holes on the back of the mantel.
5. Place the Mantel
Now take the mantel and place it by pushing the holes into the lag bolts. Make sure to do this quickly before the silicone in the holes of the mantel dries up.
How to Install a Heavy Wood Mantel?from runtoradiance.com
Your brick or stone fireplace is more than capable of holding the weight of a heavy wood mantel. Here are a few additional tips to help you install a heavy wood mantel:
How to add support to a brick wall?from runtoradiance.com
Add support by drilling holes for lag shields , then install lag bolts into the brick
Why are lag shields important?from runtoradiance.com
The Lag shields were also important to have because once they are placed in the predrilled hole, a lag bolt is able to slip inside of them and be tightened, ensuring that they won’t fall out when a heavy wood mantel is installed on it.
How high should a fireplace mantel be?from runtoradiance.com
54” above the hearth is the standard height for a fireplace mantel, but how high you hang a fireplace mantel will vary depending on your fireplace and your personal preferences.
Can you put floating mantels on brick fireplaces?from runtoradiance.com
Once you have your supplies gathered, it’s time to get your floating mantel DIY on. Let’s do this! Keep in mind, this tutorial is specifically for how to install a floating mantel on a brick fireplace, but the techniques could be used for another type if you alter the directions.
Can you add videos to your watch history?from youtube.com
Videos you watch may be added to the TV's watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information. Please try again later.
How Do You Secure A Heavy Mantle?
There are a few ways to secure a heavy mantle. One way is to use a safety pin to attach it to your dress. Another way is to use a brooch or pin to secure it in place.
How Do You Anchor A Mantel?
There are many ways to anchor a mantel. One way is to use a metal bracket that is bolted to the wall. The bracket has been designed to hold the weight of the mantel. Another way to anchor a mantel is to use a piece of wood that is attached to the wall and the mantel. The wood acts as a support for the mantel.
How Do You Secure A Floating Mantel?
There are a few ways to secure a floating mantel. One way is to use heavy duty Velcro straps around the top and bottom of the mantel. Another way is to use L-brackets screwed into the wall on either side of the mantel, with the mantel itself sandwiched in between.
How Do You Attach A Mantel To The Wall?
There are a few ways to attach a mantel to the wall. One way is to use screws and anchors. Another way is to use a construction adhesive.
How Do You Attach A Beam Mantel?
There are a few ways to attach a beam mantel. One way is to use metal brackets that are screwed into the wall and the beam. Another way is to use a wooden beam that is cut to size and then glued and screwed into the wall and the beam.
How Do You Secure A Mantel To The Wall?
There are a few ways to secure a mantel to the wall. One way is to use brackets that are attached to the wall and then the mantel is attached to the brackets. Another way is to use screws or nails to attach the mantel directly to the wall.
How Do You Anchor A Floating Mantel?
There is no definitive answer to this question as it depends on the individual mantel and how it is to be anchored. In some cases, a floating mantel may be attached to the wall at either end with brackets, while in others, it may simply be propped up against the wall.
How to Build a Wood Mantel and Hang it on a Stone Fireplace
I wish I had the chops to do it sooner because it was SOOOO EASY! I’ll show you how to build a wood mantel and hang it on a stone fireplace. If you have built our floating shelves, it’s basically the same idea. I feel like I got a complete fireplace renovation by just building a simple shelf!
Step 2: Drilling Pocket Holes
Next, I used my Kreg Jig to drill three 3/4″ pocket holes in one end of each of the short 1×10 pieces.
Step 3: Assembling the Shelf
I applied a thin line of Gorilla Wood Glue to the pocket hole end of the short pieces.
Step 4: Building the Bottom of the Mantel
I found a great deal on these 18″ corbels from Amazon for only $60 for the set! You can see the corbels I purchased in the box below! The corbels are totally optional. You can use a different style or leave them off completely for a more contemporary look.
Step 5: Attaching the Bottom of the Mantel to the Shelf
I used some scrap pieces to keep the bottom level with the mantel and attached it with wood glue and 1 1/4″ pocket hole screws.
Step 6: The Finish
Now she’s ready for the finish! I decided on one of our favorite finishing techniques. We like to use Vaseline, stain and paint to get a great chippy, distressed look.
Step 7: Mantel Installation on Stone Fireplace
Now to hang it on the stone! (I did this while the stain and paint were drying to speed things up).
