How to Install a Ceiling Medallion
- Step 1: Remove and Clean. Shut off the power to the light that you're removing and take down the fixture. Cover all wire...
- Step 2: Measure Medallion Hole. If your ceiling medallion doesn't have a hole, you'll need to create one for the light...
- Step 3: Cut Medallion Hole. Using a large bit, drill a hole in the center of the medallion...
How do you install a medallion on a ceiling light?
How to Install a Ceiling Medallion. 1 Step 1: Remove and Clean. Shut off the power to the light that you're removing and take down the fixture. Cover all wire ends with wire nuts. 2 Step 2: Measure Medallion Hole. 3 Step 3: Cut Medallion Hole. 4 Step 4: Prep Medallion. 5 Step 5: Glue Medallion. More items
How do you cut a hole in a ceiling medallion?
Insert the drywall saw into the drilled hole and cut along the small circle you just drew. Sand the hole edges smooth. Then check that the light fixture's threaded bolt is long enough to reach past the ceiling medallion. Use a longer threaded bolt if it's not. Paint or finish the medallion as desired.
How do I install a medallion on my canopy?
It’s always easiest not to paint over your head. Slide the canopy down the chain or rod. Loosen the retaining collar or the screw holding the canopy in place and slide it out of your way. Measure and mark the ceiling where the medallion will go. Use a tape measure or yard stick to measure from the electrical box to make sure you are centered.
Can ceiling medallions be made from plaster?
Whether your home has a contemporary style or traditional flair, ceiling medallions change the look of a space in just an afternoon. Here's how to install one in your home. Once made from plaster, decorative ceiling medallions are now made in DIY-friendly, lightweight, and affordable polyurethane.
How do you install a ceiling medallion without removing fixtures?
0:492:00Installing a Fypon Ceiling Medallion - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext countersink a couple of trim head drywall screws through the medallion. And into the ceilingMoreNext countersink a couple of trim head drywall screws through the medallion. And into the ceiling joist to hold it in place while the glue sets.
What glue do you use for ceiling medallions?
For the adhesive, Milkie recommends Loctite Power Grab, a type of polyurethane construction adhesive that gets tacky almost instantly. "If you hold the medallion to it for five seconds, it will stay up there," he said.
How do I install this old house ceiling medallion?
2:143:12Easy Medallion Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd align the keyholes over the screws by lining up the pencil mark you made earlier once alignedMoreAnd align the keyholes over the screws by lining up the pencil mark you made earlier once aligned turn the medallion in the tightening direction until the keyhole locks into place.
Are ceiling medallions out of style?
While always a classic, the ceiling medallion is once again fashionable in modern-day home design.” Gigi Lombrano, Gigi Lombrano Interiors. “Ceiling medallions are classic! They were first seen in middle and upper class homes in the 19th century.
How do you attach a ceiling medallion to the ceiling?
0:451:45How to Install a Ceiling Medallion - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst we'll drill a pilot hole. Then apply the construction adhesive to the back of the medallion.MoreFirst we'll drill a pilot hole. Then apply the construction adhesive to the back of the medallion. Set the medallion in place. Then drive in a few screws. To hold it until the glue dries.
How do you attach a ceiling medallion to a light fixture?
0:040:47How to Install a Ceiling Medallion - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne is removing the fixture. Itself but be sure the power is turned off before you start the hole inMoreOne is removing the fixture. Itself but be sure the power is turned off before you start the hole in the center of the medallion. Should align with the electrical box in the ceiling.
When should you use a ceiling medallion?
Ceiling medallions are generally intended for rooms with high ceilings. A good rule of thumb is that the higher the ceiling, the larger the medallion should be. So a really tall two-story ceiling will require a large medallion, unless its dimensions for length and width are small.
Do you paint ceiling medallions?
Ceiling medallions can be painted to match the ceiling color, trim color, a favorite piece of furniture, or the overall theme of a room. Because they are sometimes thought of as old-fashioned or regal, a finish can also give them an antique look.
How do you remove a decorative ceiling medallion?
Cut around the medallion edge with the knife or razor. Gently pry around the medallion edge with the small blade; position the wide blade so that you pry against it rather than against the ceiling itself. The medallion might come loose easily.
What size should your ceiling medallion be?
First, measure the length and the width of the room and multiply those numbers. That will give the square footage. Once you have that number, divide it by seven; that number is the diameter of the ceiling medallion that you need.
What is a ceiling medallion called?
Aside from adding visual interest overhead and impressing guests, ceiling medallions — or centers, as they were also known — had a very useful purpose, Winkler says.
How big should a medallion be for a ceiling fan?
between 18" and 24"As a general rule, if you are installing the medallion above a ceiling fan, the medallion should be smaller than the diameter of the fan blades. For most fans that are mounted close to the ceiling, a medallion between 18" and 24" in diameter will be just the right fit.
How do you glue plastic to ceiling?
Stick the plastic to the ceiling using blue painter's tape. The tape won't damage the ceiling surface when removed. Use a thick painter's tape for added strength. Apply pieces throughout the area where the plastic meets the ceiling.
How do you cut a hole in a ceiling medallion?
Using a large bit, drill a hole in the center of the medallion to provide access for the drywall saw. Insert the drywall saw into the drilled hole and cut along the small circle you just drew. Sand the hole edges smooth.
What is a ceiling medallion?
At its most basic, a ceiling medallion is a decorative element that dresses-up and enhances the area around the ceiling canopy, where the wiring for a chandelier or other fixture enters the ceiling junction box.
When hanging a new fixture, what is the first thing to do?
Safety First! – When hanging a new fixture begin by turning off the power to the light fixture at the breaker panel or fuse box.
Do you need to enlarge the center hole of a medallion?
2. Depending on your ceiling opening, you may find it necessary to enlarge the center hole of the medallion.
Can you paint a medallion?
Lightweight and durable, medallions can be very ornate with a carved look or a decorative pattern, or they can come in solid colors. You can even paint most of the designs to match an existing room paint color.
Step 1: Remove and Clean
Shut off the power to the light that you're removing and take down the fixture. Cover all wire ends with wire nuts. Thoroughly level and clean the ceiling where you will hang the medallion.
Step 2: Measure Medallion Hole
If your ceiling medallion doesn't have a hole, you'll need to create one for the light fixture. That hole will allow you to pull the light fixture's electrical wiring through, but it should be small enough to hide the wiring. Measure the light fixture's cover plate, and transfer that measurement to your medallion.
Step 3: Cut Medallion Hole
Using a large bit, drill a hole in the center of the medallion to provide access for the drywall saw. Insert the drywall saw into the drilled hole and cut along the small circle you just drew. Sand the hole edges smooth. Then check that the light fixture's threaded bolt is long enough to reach past the ceiling medallion.
Step 4: Prep Medallion
Paint or finish the medallion as desired. Apply adhesive caulk to the back of the ceiling medallion; center and attach to the ceiling.
Step 5: Glue Medallion
Using trim-head screws, attach the medallion to the ceiling while the adhesive dries. Caulk over the screw heads.
Where to place a ceiling medallion?
Where to Place the Ceiling Medallion for Chandelier - With the help of an assistant place the medallion on the ceiling where you want to install the product. Then lightly outline the ceiling medallion shape on the surface of the ceiling and mark through your newly drilled mounting holes where you will be securing the medallion to the ceiling so that when removed the marks you made are clear [B].
How many people are needed to install a medallion?
5 Depending on size of the medallion you are installing it is recommended to have a minimum of 2 people and 2 ladders (Please follow Ladder MFC safety policies) for holding the medallion in place and during fastening to ceiling.
What is AFD in ceiling?
AFD and World of Decor ceiling medallions function as a decorative element only, and are not designed to support electrical fixtures or provide any load bearing capacity. AFD shall not be responsible if any failure to comply with these installation instructions results in the products failing to perform the purpose intended.
What is a medallion in a chandelier?
Ceiling medallions from World of Décor provide sought after architectural detail, add interest to a chandelier, and dimension to an otherwise vast, open ceiling. In a few simple steps, you can add that extra touch of ambiance and beauty by adorning chandeliers in entryways, dining rooms, or simply by being used as decoration for any room in your home.
Can you use a medallion to support a ceiling fan?
2. DO NOT use the medallion to support the weight of the lighting or ceiling fan fixture.
Do you need a down rod for a medallion?
NOTE: You may need to purchase a longer thread pipe or down rod to anchor fixture or fan, as supplied pipe or rod may not accommodate medallion thickness. (Available at local hardware store) 7 finishing caps are provided as decorative caps over the installed fastener for finished look.
Can you install ceiling medallions DIY?
Exquisitely detailed and constructed in lightweight materials, our ceiling medallions provide incomparable value with an easy, DIY installation. The patented, award-winning design enables our ceiling medallions to be installed by the consumers themselves without the need to hire a professional. Save money and install any of our ceiling medallions yourself by following a few simple steps and instructions.
How to attach a medallion to the ceiling?
If you decide to use some construction adhesive, simply place some on the back of the medallion, and stick onto the ceiling. You’ll have to prop a 2×4 or something up against it to hold it in place while the glue sets.
What is a ceiling medallion?
A ceiling medallion is a decorative element that has been used since the 1800s to enhance the look of a ceiling canopy A.K.A. makes it look fancy and expensive. It’s also a great hack to cover up those wire and electrical boxes when setting up a chandelier and other light fixtures.
What is the last step in installing a light fixture?
Screwing the canopy onto the ceiling is the last step in a light fixture install. Having the canopy tightened will further assist to hold your medallion in place. In almost every medallion we have in our home, the canopy is the ONLY thing holding the medallion to the ceiling. These ceiling medallions are typically made of styrofoam, ...
How big should a medallion be?
There are no hard or fast rules on sizing, but in general, I personally think a medallion looks best if it’s AT LEAST the width of the light fixture, or up to 1.5x, maybe 2x LARGER.
Can you install a split medallion without electricity?
There are a number of medallions that you can install without completely uninstalling your light/messing with electricity. “ Split medallions ” are segmented.
Is a ceiling medallion heavy?
These ceiling medallions are typically made of styrofoam, so they are NOT heavy. 6. Caulk, if desired. It’s not necessary, but if you look at your installed medallion, and it doesn’t look flush enough to the ceiling, then make sure the canopy is screwed in tightly enough.
Is it easy to install ceiling medallions?
So the good news is that installing ceiling medallions may be the easiest DIY project ever. The great news is that it’s also inexpensive.
How much does a ceiling medallion cost?
Ceiling medallions can range from $10 – $1,000. It’s kind of crazy! The price difference boils down to intricate details (like gold leaf or gilded features), the material, and the size. We typically like to stay in the low to middle price range. Our preference is a single piece medallion because they are easier to install (rather than two pieces split down the center that have to fit together), and we prefer plaster, wood, or primed polyurethane (which looks and feels like hard foam). The medallion in this tutorial was a lower end option, which cost $17 for a 16″ round medallion made of polyurethane.
How to measure for a medallion?
You have to consider the size of the room rather than the light fixture itself. Measure the length and width of your room in feet. Multiple the length and the width, then divide by 7. This will give you the proportionate medallion size in inches. For instance… a 10‐by‐14 foot room calculation would be: 10 feet x 14 feet = 140 square feet divided by 7 = 20 inches diameter. You can use that dimension as a starting point and determine what looks best with your light fixture, plus or minus a few inches.
How to keep a medallion from sagging?
Tack a few finishing nails around the perimeter of the medallion, on an angle. This will keep the medallion from sagging as time goes on. The light fixture is actually holding the medallion to the ceiling, not the caulk – so adding these small nails will ensure it stays in place without drooping over time.
Can you paint a medallion at the end of the installation?
I’ll begin by saying, pre-painting your medallion is the easiest thing to do , but you’ll still end up doing some touch-up painting at the end of the installation. I used “Ceiling Bright White” by Sherwin-Williams for my medallion this time around.
What do you need to make a medallion?
You Need: Ladder or something else safe to stand on and reach the ceiling. Tape measure or yardstick. Pencil. Drill, hole drill bit or hack saw if your medallion is not pre-cut. Screws the right depth for your medallion. Screwdriver.
Where do you put the screws on a medallion?
Start the screws on the front of both sides of the medallion, so that when it is over your head, the screws are ready to go. Most medallions are soft enough that you don’t have to drill a pilot hole, just push them in. If you put the screws in an area of the medallion that is not smooth, they won’t be obvious.
How many screws do you need to attach a medallion?
For a most medallions you probably will only need three screws per side. They are really just to hold the medallion up until the adhesive dries. Apply adhesive. Flip the medallion over and put a bead of adhesive (water clean-up liquid nails) on the back about ½” from the edge of one side of the medallion.
Do you need a stud detector for ceiling joists?
Some instructions recommend a stud detector to locate ceiling joists. This is not necessary unless your medallion is very large and heavy.
Can you use chalk to mark a ceiling?
If you use chalk to mark, you can just brush it off when you are done. Make sure the threaded rod is going to be long enough to put the canopy back up. If not, you may have to remove the light fixture anyway. Some instructions recommend a stud detector to locate ceiling joists.
Can you fit two pieces of a split ceiling medallion together?
Easily fit the two pieces of the split ceiling medallion together.
Can you hammer a medallion over your head?
Some instructions recommend finish nails. This is not the easiest way to do this. It is not easy to hammer over your head and it is very easy to damage the medallion. The finish nail has no real head to keep the medallion secured to the ceiling.
