Choose one corner of the tree or bush that you are decorating with the Christmas net lights, and attach a loop at the corner of the net lights around the branch. Take the opposite corner of the Christmas net lights and extend it to the opposite corner of the bush, looping the end around a limb on that corner of the bush.
Full Answer
How do you light a bush with Net lights?
For thicker bushes, start with one set of lights further back and another in front of the first set for complete illumination. When installing a net light, take the time to pull branches and leaves through the holes in the net to set the lights a bit further back into the bush. This creates a more natural effect.
How do you light a hedgerow with Net lights?
By placing the net light over the top and then letting the net light sides naturally fall over the front and back side of the bush it creates quick uniform light coverage from multiple angles. Rectangular bush shapes are also common abutting walls or stairs, which often means only the front side and top side of the hedgerow are visible.
How do you attach Net lights to a tree?
Untangle any of the lights that are twisted, so that the cord to plug into the outlet is not twisted within the web of lights. Choose one corner of the tree or bush that you are decorating with the Christmas net lights, and attach a loop at the corner of the net lights around the branch.
How do I use NETnet lights?
Net lights can provide a unique look of patterned lighting across a large number of bushes, however if you prefer random lighting patterns, this can be accomplished with net lights too! Square Bushes - Start wrapping with the edge of your net light at the corner of your bushes as you would a present.
How do you hang net lights on a bush?
Net light sets can be connected end to end and wrapped either vertically or horizontally on these types of shapes, however, we recommend you hang them like curtain panels vertically around the bush to avoid a heavy concentration of lights at the top.
How do you wrap a bush with lights?
1:545:24Installing Christmas Lights On Bushes And Powering Them - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd they were you know if they got six inches in between then. We don't want to run a little strainMoreAnd they were you know if they got six inches in between then. We don't want to run a little strain of light to cost or if they're ten inch is a piece you know they're you know 10 12 inches of peace.
How do you put up net Christmas lights?
0:563:07Christmas Lights Storage HACK!!! | EASY Storage - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd I am going to just wrap. My lights. Around the hanger. Then I'm gonna take my end. And just plugMoreAnd I am going to just wrap. My lights. Around the hanger. Then I'm gonna take my end. And just plug it in. And there you have it is this not the easiest. Simplest way to store your Christmas lights.
How do you hang Christmas lights on a large bush?
0:323:33How To Install Christmas Lights On Large Bush And Make It Look Good!YouTubeStart of suggested clipEnd of suggested clipWay if snow gets on it it's just going to go right down in underneath though and then we're going toMoreWay if snow gets on it it's just going to go right down in underneath though and then we're going to start with a circular motion. Around the top of Bush.
How many lights are needed per bush?
For live trees and shrubs, use 100 mini lights or 50 C7 lights for every vertical foot. On thin trees, you can use half that number of lights per vertical foot.
How do you wrap a tree with net lights?
1:282:22How To Wrap Trees With Lights - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow begin passing the ball of lights around the trunk of the tree. Keep the lights pulled tight asMoreNow begin passing the ball of lights around the trunk of the tree. Keep the lights pulled tight as you go to create tension. And prevent the string from slipping down the tree.
How do you store net lights without tangling?
Place the strand on top of the plastic sheet and roll the plastic sheet and strand lights together. This will keep the icicle strands from tangling and bundle everything neatly inside a sheet of plastic.
How many net lights can be strung together?
So, while these homeowners could safely plug 144 strands into one 15-amp outlet in terms of total wattage, the connected lights should never go higher than 210 watts, meaning that only 21 total strands can actually be plugged into each other.
How do you hide Christmas lights between bushes?
For shrubs, use mini lights with 25 to 50 lights per set on a green cord—they'll blend in much better than netted lights. Tuck them into shrubs in a random pattern, keeping the strings 4 to 6 inches apart. And wrapping bulbs running between bushes with black electrical tape saves you from having to buy blackout caps.
How do you put string lights on a hedge?
0:552:10How To Hang Lights on Landscaping - Ace Hardware - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart winding lights up from the trunk at the lowest branch veer out to the tip. And then back atMoreStart winding lights up from the trunk at the lowest branch veer out to the tip. And then back at the lowest branch veer out to the tip. And then back leave wide spacing.
How many Christmas lights do I need for bushes?
Bushes and Hedges: One to two 4-foot by 6-foot light nets per bush or hedge. Trees: One 32-foot strand (100 lights) for every 1 1/2 vertical feet of an evergreen tree; or, about 500 to 600 lights for an 8-foot tree. Windows: One 16-foot strand per single-width window.
Can I use net lights on a Christmas tree?
One Christmas, I grabbed outdoor net lighting instead of string lights from our attic. Instead of climbing up to switch the lights, I decided to toss the net lights over the tree.... and it worked! No more untangling long light strands. No more walking laps around the tree to wrap the lights.
How do you wrap a bush?
Here's what we recommend:Wrap with twine: If heavy snow is in the forecast, bind the branches with twine. ... Cover with a burlap sack: After wrapping a shrub with twine, encase it in a burlap sack or commercial shrub wrap if cold, high winds are a threat.More items...•
How do you decorate outdoor bushes for Christmas?
For basic landscaping year-round, install ground lights along the perimeter of the bushes or along the outside of the garden bed. Seasonal decor choices such as lit candy canes, mini reindeer or LED outdoor candles can balance the lights on the bushes as well as tie into your overall Christmas yard theme.
How do you burlap a bush?
Prune away any branches on the shrub that are dead, diseased or weak.Unroll the burlap.Place the burlap on one side of the shrub, beginning at the bottom. ... Wrap the burlap around the shrub two to three times. ... Cut the burlap when you have the shrub covered.Tie the burlap with twine.More items...
How do you hide Christmas lights between bushes?
For shrubs, use mini lights with 25 to 50 lights per set on a green cord—they'll blend in much better than netted lights. Tuck them into shrubs in a random pattern, keeping the strings 4 to 6 inches apart. And wrapping bulbs running between bushes with black electrical tape saves you from having to buy blackout caps.
How to extend Christmas net lights to bush?
Take the opposite corner of the Christmas net lights and extend it to the opposite corner of the bush, looping the end around a limb on that corner of the bush.
What to watch out for when attaching lights?
Watch out for sharp thorns on bushes when attaching the lights.
Why are Christmas net lights good?
One of the advantages of Christmas net lights is that they are quick to install on your bushes and trees. You don't have to worry about cutting your hands up as you wind the wires around limbs, thorns and other prickly items that may grow on your bushes. When storing web lights, there is a lower risk of tangling, as there are fewer loose wires to get twisted.
What kind of lights should I use for bushes?
The Best Lights for Bushes. Christmas lights come in all shapes and sizes, but not all of them work for bushes. Net lights and mini-light strings provide overall illumination, making them ideal for most bushes. Avoid large globe and bulb lights unless you’re decorating a very large bush.
How to decorate a bushes for Christmas?
Arrange lights or decorations around the bushes so that they’re still festive during the day, and to create a ground-effect when lit up at night. When you just light the bushes, they can appear to be floating in the yard, which isn’t always the desired effect. For basic landscaping year-round, install ground lights along the perimeter of the bushes or along the outside of the garden bed. Seasonal decor choices such as lit candy canes, mini reindeer or LED outdoor candles can balance the lights on the bushes as well as tie into your overall Christmas yard theme.
How to make bushes appear floating?
Arrange lights or decorations around the bushes so that they’re still festive during the day , and to create a ground-effect when lit up at night . When you just light the bushes, they can appear to be floating in the yard, which isn’t always the desired effect.
Step 1
Decide what style and color lights you want to string through the bushes -- large or mini, multicolored or single-colored. Blinking or chasing lights are other options to consider. When purchasing your lights, make sure to purchase lights that can be used outdoors.
Step 2
Plug in your lights before wrapping them through the bushes. Not only will this tell you if the lights are working, but it will also give you an idea of how the bushes will look while you are wrapping them.
Step 3
Begin stringing the lights at the bottom of the bush. If you want to light the front and back of the bush, wrap the lights around the bush in a spiral formation, moving from the back to the front and wrapping the lights upward as you go.
Step 4
Cover all plugs and sockets with electrical tape. This will prevent precipitation from collecting on the plugs and in the sockets, eliminating the risk of electrical shortages or fire.
What to do with Holly bushes when placing net lights?
Holly Bushes - Care should be taken when placing net lights on sharp leafy bushes. Wear gloves and try to prevent the wires from getting snagged or damaged.
What is net light?
Net lights are string lights that have been connected to form a grid, which can easily cover the exterior of bushes or tree trunks in a fast, hassle free installation process .
How to make a random light pattern?
To Create Random Light Patterns - If you want your lights to appear random instead of patterned, there are several ways to achieve this look. Try overlapping the nets across your bushes and adding in a few strands of string lights over top. You can also push the nets further into your bushes instead of laying them over top. The greenery above the net will diffuse the light slightly, creating an inviting glow from within the bush, which also helps create a more random light pattern.
How to wrap a square bushes?
Square Bushes - Start wrapping with the edge of your net light at the corner of your bushes as you would a present. This will create a smooth edge and even light distribution.
How to measure the circumference of a tree trunk?
Tip: To determine the circumference of your tree trunk, wrap a string around the trunk at its widest section and cut the string at the point where the two ends meet. Then lay the piece of string flat and measure it with a measuring tape, this will give you the circumference of your tree trunk!
How to decorate bushes for Christmas?
Originally the only way to achieve lighting on bushes was through the use of string lights either wrapped around or tucked into the interior of the shrub, until one day a very smart elf came up with an easier solution and net lights were born!
Can you install net lights on bushes?
Net light installation is very easy once you know where to start and the best method for creating the look you want to achieve. Net lights can provide a unique patterned light design across a large number of bushes, however if you prefer random lighting patterns, this can be accomplished with net lights too!
Re: Rgb net lights for bushes
I have used 2"x4" green wire garden fencing with strings of lights zip tied to it. Makes for a very uniform look, easy and quick to install and remove.
Re: Rgb net lights for bushes
Do you have pictures so i can see howit looks ? The lady i am xoing it for is 56 and has to be easy to work with.
Re: Rgb net lights for bushes
Sorry, no, they have been disassembled due to downsizing our display. I'll do my best to describe them. I was covering some fairly large shrubs, so I bought some 4' tall wire fencing (2" by 4" spacing) from Home Depot. It comes as a roll and they have different lengths.
Re: Rgb net lights for bushes
this product is available to make matrices easier. you might be able to use for bushes.
Re: Rgb net lights for bushes
Yes going to use pixels. Neat idea ut wonder how it would lay on bushes. It would basically have to make an L shape. Will that do it?
Re: Rgb net lights for bushes
Their ABS product is pretty stiff, I don't think it would be easy to form it to the rounded shape of a bush. You could stand it up and wrap the front half or so of the shrub, sort of like half of a vertical cylinder. You could use a piece of rebar at the ends to hold it in place (with zip ties or wire or whatever)
