- Turn the knob from the “Off” to the “Pilot” position.
- Push in the pilot knob, which manually sends gas into the system.
- Push the igniter button once every second until it lights. ...
- After the pilot lights, keep the pilot button held down about 15 to 30 seconds to warm up the thermocouple and ensure that the flame stays lit. ...
- Release the pilot knob. ...
How do you light the pilot on a Valor gas fireplace?
Using the remote, hold the small flame button until the flame goes out. Using the Valor wall switch press the DOWN button. Your pilot light will remain on and allow you to easily start up your fireplace at a later date.
How do you light a gas fireplace with a control panel?
A gas fireplace control panel usually has a red igniter pilot knob and a control dial. The pilot knob should have the options “Off,” “Pilot” and, in some models, “On.” Here’s how to light a gas fireplace with a control panel. Turn the knob from the “Off” to the “Pilot” position. Push in the pilot knob, which manually sends gas into the system.
How do I Turn my Valor fireplace on/off?
Easily shut down your fireplace by pressing the OFF button on the remote or the ON/OFF button on the Valor wall switch. Using your Valor remote, press the large flame button to turn your fireplace to high.
How do I adjust the height of the flame on Valor?
If you are using the Valor wall switch, simply use the UP & DOWN buttons to adjust your flame height until you find your preferred setting. Using the remote, hold the small flame button until the flame goes out. Using the Valor wall switch press the DOWN button.
How does a Valor fireplace work?
Rather than directly heating the air, Valor radiant gas fireplaces emit heat through its glass and spread warmth as it is absorbed by people and furniture within a room. This is unique compared to hot air systems which simply put warm air into rooms without heating objects.
How do I light my electronic ignition gas fireplace?
0:051:25How to Light the Pilot with a Direct Spark Ignition System - YouTubeYouTubeStart of suggested clipEnd of suggested clipSlide open the bottom faceplate panel depressed a gas control knob halfway and turn the knobMoreSlide open the bottom faceplate panel depressed a gas control knob halfway and turn the knob counterclockwise to the pilot setting depress the knob all the way and hold for approximately 30 seconds.
Why won't my gas fireplace light up?
Check Your Igniter and Thermocouple If nothing is blocking the tubing, and gas is flowing out, there might be something wrong with the spark igniter and thermocouple. Make sure there's no debris lodged between the two. If the pilot light ignites but doesn't stay lit, you might need to replace the igniter.
How do you manually light a gas fireplace?
0:401:40How to Manually Light a Gas Fireplace - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what I'm going to do is. Light this match. And place it as deep into the fireplace. Keep a coupleMoreSo what I'm going to do is. Light this match. And place it as deep into the fireplace. Keep a couple of matches. As. I can where I know the gas is going to move over the lighter alright it's burning.
Where is igniter button on gas fireplace?
Near the on/off knob, there should be a red or black button, about ¾ of an inch long, labeled “Igniter” that simply pushes in just like on a gas grill. Once you've found it, press in the ON/OFF/PILOT knob and hold for about five seconds, then push the igniter.
Do electronic ignition fireplaces have a pilot light?
Flip of a Switch The IPI system does not use a pilot light and instead relies on an electronic ignition switch to light the pilot after flipping on the wall switch or using the remote.
How do I get my gas fireplace to work?
Turn the knob from the “Off” to the “Pilot” position. Push in the pilot knob, which manually sends gas into the system. Push the igniter button once every second until it lights. Depending on how long it's been since the gas fireplace was last used, ignition may take multiple attempts.
What do you do when your pilot light won't light?
You need to turn the valve to the off position for at least three minutes. Once you have had the valve at off for a few minutes, switch it over to pilot setting. You will need a match that is lit. Hold it to the pilot opening and push the reset button on your pilot control.
Should the pilot light always be on in a gas fireplace?
The pilot light needs to run continuously because, without it, the gas going into the fireplace would not have an ignition point. This would lead to fireplaces or entire gas fireplace inserts filling up with gas when they are turned on.
How do I turn on my valor fireplace without the remote?
Using your wall switch, press the ON/OFF button to ignite your pilot and turn the flame to high fire.
How do I light the pilot on my old gas fireplace?
Move the pilot knob to the pilot position. This will allow you to push the knob in, which manually releases the flow of gas to the pilot. Now, while holding the pilot knob in, push the igniter button in once every second until the pilot is lit.
What happens if the pilot light goes out on a gas fireplace?
Can a Pilot Light Outage Be Dangerous? The worry here is that when a pilot goes out, the gas valve that supplies the fuel for the pilot flame could still be pumping gas. This can mean a buildup of gas, and when the pilot is relit or relights itself it could result in a very serious explosion.
Why won't my gas fireplace turn on when I flip the switch?
Gas Fireplace Igniter Isn't Sparking If your pilot is lit and the fireplace isn't igniting when you push the button or flip the switch, the igniter may be dirty or defective. Clear away any dirt or debris that may be in the way between the igniter and thermocouple or thermopile.
How do I light the pilot on my gas fireplace without ignitor?
4:217:30How to light a Gas Fireplace pilot light with no ignitor - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis button right here it's on P for pilot. So I'm gonna hold it down you'll hear the gas. Okay soMoreThis button right here it's on P for pilot. So I'm gonna hold it down you'll hear the gas. Okay so you're supposed to hold it down for a little while. And then turn it to the on. Position.
How do you turn on an electric fireplace?
Electric fireplaces are designed to make life simple. They have no real fire, no smoke and no gas byproducts. In fact, all you have to do is plug yours into a wall outlet, just like you would any other appliance. Then, simply press a button to turn the fireplace on.
Why has my electric fire stopped working?
Check the fireplace for any faulty wiring. A tightly bent or over-stretched power cord may be causing the problem. Check your fuse box or breaker for any switches that have tripped. Inspect the fuse on the electric fireplace and replace if necessary.
How to control the power on a Valor fireplace?from valorfireplaces.com
There are two easy ways to control the power to your Valor fireplace - with the standard handheld remote control or the optional Valor wall switch (standard on select units). When using your remote control, hold down the OFF and large flame buttons simultaneously.
Why is my valor fireplace beeping?from fireplacehubs.com
The beeping sound of your Valor fireplace will indicate the batteries of the receiver are getting weaker. It means you need to replace the batteries. To replace the batteries, find the holder under the firebox near the controls. Change the batteries and put the holder back into its place.
How to set the temperature on a gas fireplace?from valorfireplaces.com
To set the temperature of your fireplace, similar to central heating in your home, press the SET button until you see the TEMP (SUN) mode. Hold down the SET button until the TEMP flashes - use the large and small flame buttons to select your desired temperature. Press the OFF button (or wait 10 seconds) to complete programming. For more information please refer to your owner's manual.
What is a fireplace handset?from valorfireplaces.com
The handset is the sensor for the temperature in your home, similar to a thermostat. Temperature regulation of the fireplace can be affected by the handset location. For example, If the handset is mounted on an outside wall, the cold could cause the handset to increase the fireplace temperature.
What is Valor 10 remote?from valorfireplaces.com
The Valor 10 remote control offers two-way communication and tactile button feedback to provide our best control system yet.
How to turn a pilot on fire?from valorfireplaces.com
Using your wall switch, press the ON/OFF button to ignite your pilot and turn the flame to high fire.
How long does it take for Valor to shut down?from valorfireplaces.com
The Valor SmartPilot System automatically shuts down if there is no activity after 7 days, reducing unnecessary pilot gas consumption and saving energy. A great efficiency and safety feature, the 7-day shutdown has several key benefits.
How to tell what gas fireplace you have?
To determine what make and model of gas fireplace you have, look for a rating/data plate somewhere on the unit.
Where is the pilot located on a gas fireplace?
On our gas fireplace, the pilot is located to the left of the controls within the burner assembly area.
Why do you turn the controls on a gas fireplace to the pilot position?
Turning the controls on a gas fireplace to the ‘Pilot’ position attempts to light the pilot flame, which once lit, depending on the model of gas fireplace , can then be left on throughout the duration of the fireplace’s use (such as through winter), to help start the main burner and flames on demand.
Why do fireplaces have shut off valves?
A gas fireplace will typically have some form of shut-off valve to isolate the gas from the fireplace when it’s not in use.
What is the owner's manual for a gas fireplace?
The owner’s manual for your individual gas fireplace will detail the exact process you need to follow for your own particular model of fireplace.
Where are the controls on a gas fireplace?
The controls to operate a gas fireplace are typically found on the fireplace itself, often towards the base of the unit.
Does a gas fireplace have a firefront?
Our particular model of gas fireplace has a firefront that hides the burner assembly (including the controls) behind.
How Your Gas Fireplace Works
Gas fireplaces use natural gas or propane to create a flame. The gas is sent through a small pipe into the fireplace burner. Once the gas is ignited, it creates a flame that heats the fireplace. The heat then radiates outwards and warms the room.
Lighting A Gas Fireplace with Mantel Knobs
Let’s start knowing how to light your gas fireplace with mantel knobs.
Lighting A Gas Fireplace With A Match
Step 1: Make sure the pilot light is on by looking at the control panel on the front of the fireplace. If it isn’t lit, turn the knob until it is.
Lighting A Gas Fireplace With A Lighter
To light a gas fireplace with a lighter, you need to follow a simple process that only takes a few minutes.
Lighting A Gas Fireplace With Electric Ignition or Remote
One advantage of a gas fireplace is the way to light it with electric ignition.
Final Words
A gas fireplace is always the answer when you are looking for a warm and cozy way to heat your home. It’s affordable, easy to operate, and creates a warm and cozy atmosphere with minimal effort.
Where are Valor fireplaces sold?from valorfireplaces.com
Valor fireplaces are sold via our authorized dealer network across Canada & the United States. Valor dealers provide qualified installations and aftermarket service. We want to ensure that owning a Valor fireplace is a truly enjoyable experience and our dealer network is an integral part of the process. From the initial search to the finished product, our dealers will be there to make the process of owning and servicing a Valor as easy as possible.
How to tell what model of fireplace you have?from valorfireplaces.com
Answer: To determine what model fireplace you own you must find the rating plate. Every fireplace comes with a rating plate that must stay attached to the fireplace. For any of our fireplaces built within the last 10 years the rating plate will be attached to a wire located near the gas valve. Note that this does often require removing the trim (not the glass window) to access. Most trims can simply be removed by lifting it up off of the hooks and pulled out toward you.
Why does my fireplace beep?from valorfireplaces.com
Answer: The series of quick beeps is an idication that the batteries within the unit are critically low. This does not refer to the 9v battery in remote control but rather the 4 AA batteries inside of all of our current fireplaces. Refer to your fireplace manual or the link below regarding replacing batteries.
What is Valor HeatShift?from valorfireplaces.com
Answer: Designed to reduce wall surface temperatures, Valor HeatShift™ is recommended when adding a wall mounted TV, artwork or heat sensitive materials above your fireplace. Available on select zero-clearance gas fireplaces and is required on our multi-sided LX engines.
What is included in the owner's manual for a fireplace?from valorfireplaces.com
Answer: Your owner's manual includes instructions on routine maintenance such as glass cleaning and replacement of batteries in your remote receiver and handset. Scheduling a regular maintenance check with your dealer helps to ensure safe and efficient use as well as maximizing the service life of your fireplace.
Can you order replacement parts for a fireplace?from valorfireplaces.com
Answer: Any of our authorized Valor dealers are able to order replacement parts for your fireplace. Please use our dealer locator to find an authorized Valor dealer nearest you. Note that installation and service must be performed by a qualified installer.
How to tell what gas fireplace you have?from fireplaceuniverse.com
To determine what make and model of gas fireplace you have, look for a rating/data plate somewhere on the unit.
What to do if you don't have a lighter to ignite a fireplace?from wikihow.life
If you do not have a long enough lighter to safely ignite the fireplace, insert a lit match next to the burner instead .
Why do you turn the controls on a gas fireplace to the pilot position?from fireplaceuniverse.com
Turning the controls on a gas fireplace to the ‘Pilot’ position attempts to light the pilot flame, which once lit, depending on the model of gas fireplace , can then be left on throughout the duration of the fireplace’s use (such as through winter), to help start the main burner and flames on demand.
How to control natural gas output in fireplace?from wikihow.life
Twist the shutoff valve until it is parallel with the gas line if necessary. Most fireplace manufactures attach a shutoff valve to the device’s gas line, giving you greater control over your natural gas or propane output.
Why do fireplaces have shut off valves?from fireplaceuniverse.com
A gas fireplace will typically have some form of shut-off valve to isolate the gas from the fireplace when it’s not in use.
How to change out a thermopile?from wikihow.life
If your pilot light stays on but your fireplace will not work, you may need to replace the thermopile. To do so, disconnect the probe from your burner and remove it with a wrench. Then, replace it with a matching thermopile by following the instructions included with the new device.
What to do if you can't get your fireplace to work?from wikihow.life
If you can’t figure out what’s wrong with your fireplace, search online for a gas specialist certified by the National Fireplace Institute. These professionals know all the ins and outs of gas fireplaces and can both figure out the problem and give you an estimate for how much it will cost to fix.
What is included in the owner's manual for a fireplace?
Your owner's manual includes instructions on routine maintenance such as glass cleaning and replacement of batteries in your remote receiver and handset. Scheduling a regular maintenance check with your dealer helps to ensure safe and efficient use as well as maximizing the service life of your fireplace.
What is the white film on the glass of a gas stove?
One of the by-products of the combustion process in a gas appliance is a mineral which can show up as a white film on the ceramic glass of the viewing door. It is believed to be associated with the varying sulphur content of the gas.
How to clean enamel cast iron?
The matte cast iron parts can be brushed clean. The enamelled cast iron parts can be cleaned with mild soap and water then dried with a lint-free soft cloth.
How to clean steel trim?
Clean steel surrounds and trims with mild soap and warm water on cooled surfaces only. Any alcohol/solvent base cleaner will weaken the coating and damage it.
Is a fireplace hot when turned off?
When performing routine maintenance, please keep in mind that fireplace surfaces, in particular the glass viewing window, are extremely hot during operation and will remain hot for a period of time after the fireplace is turned off. For for information on fireplace safety please click here.
How to tell what gas fireplace you have?from fireplaceuniverse.com
To determine what make and model of gas fireplace you have, look for a rating/data plate somewhere on the unit.
What to do if you don't have a lighter to ignite a fireplace?from wikihow.life
If you do not have a long enough lighter to safely ignite the fireplace, insert a lit match next to the burner instead .
Why do you turn the controls on a gas fireplace to the pilot position?from fireplaceuniverse.com
Turning the controls on a gas fireplace to the ‘Pilot’ position attempts to light the pilot flame, which once lit, depending on the model of gas fireplace , can then be left on throughout the duration of the fireplace’s use (such as through winter), to help start the main burner and flames on demand.
How to control natural gas output in fireplace?from wikihow.life
Twist the shutoff valve until it is parallel with the gas line if necessary. Most fireplace manufactures attach a shutoff valve to the device’s gas line, giving you greater control over your natural gas or propane output.
Why do fireplaces have shut off valves?from fireplaceuniverse.com
A gas fireplace will typically have some form of shut-off valve to isolate the gas from the fireplace when it’s not in use.
How to change out a thermopile?from wikihow.life
If your pilot light stays on but your fireplace will not work, you may need to replace the thermopile. To do so, disconnect the probe from your burner and remove it with a wrench. Then, replace it with a matching thermopile by following the instructions included with the new device.
What to do if you can't get your fireplace to work?from wikihow.life
If you can’t figure out what’s wrong with your fireplace, search online for a gas specialist certified by the National Fireplace Institute. These professionals know all the ins and outs of gas fireplaces and can both figure out the problem and give you an estimate for how much it will cost to fix.
