Use this procedure to light the pilot:
- Step 1: Turn Off the Gas Control Turn the red dial all the way to the "off" position and leave it there for about five minutes to allow any gas residue in the burner chamber to dissipate.
- Step 2: Turn the Control to Pilot ...
- Step 3: Light the Pilot Flame ...
- Step 4: Turn the Dial to the On Position
How do you light the pilot on a pool heater?
a short video showing how to light the pilot in the pool heater. turn gas on (blue nob) open door with screwdriver. put mirror down so you can see where flame goes. turn gas nob to "pilot". press nob and hold down for a few seconds. While holding nob down press red button. might have to press red button a couple of times.
How do you light the pilot on a Kenmore gas range?
Continue to press and hold down the pilot button: Continue holding the pilot button down for 60 seconds to ensure the flame stays lit. Switch the gas knob to “ON”: After 60 seconds, release the pilot button and turn the knob back to “ON.” Put the cover back on: If your pilot light has a cover, return it to its original position.
How do you light the pilot on a light switch?
press nob and hold down for a few seconds. While holding nob down press red button. might have to press red button a couple of times. continue holding pilot nob down for 10 seconds and visually confirm that flame is still lit when you let go of nob.
Why won't my gas pool heater pilot light ignite?
If the gas pool heater pilot light won't ignite there are a few reasons for this. It's something that can be checked easily but if the problem isn't visible you may need to call a service professional to inspect further. Ensure that there is gas getting to the heater.
How do you light the pilot on a Hayward heater?
While holding the knob down, press in the “click-lite” 3-4 times. This should ignite the pilot. Hold the knob down for a minute, so the pilot generator heats up, then release. Turn the gas valve knob to the “ON” position.
How do you start a Hayward gas pool heater?
0:352:02How to Start/Light Your Pool Heater for the Season by Mirage Pools and ...YouTubeStart of suggested clipEnd of suggested clipYou go to the mode button here and scroll from standby to pool. You'll see a temperature which isMoreYou go to the mode button here and scroll from standby to pool. You'll see a temperature which is right now it's 50 degrees it's the water temperature.
Where is the pilot light on pool heater?
0:005:34Hayward Pool Heater Pilot Light Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe can go on to the next step. It's rather very simple to light these you just turn the knob here.MoreWe can go on to the next step. It's rather very simple to light these you just turn the knob here. The pilot hold this down and then you strike thermopile. The ignition right here.
How do I turn on the gas to my pool heater?
0:000:38Turn Gas On for Pool Heater - YouTubeYouTubeStart of suggested clipEnd of suggested clipMost heaters have a gas shutoff valve inside the heater. This is a ray pack style heater. Which doesMoreMost heaters have a gas shutoff valve inside the heater. This is a ray pack style heater. Which does. So you will turn the gas valve in the on position.
Why is my Hayward pool heater not turning on?
If the heater has not been fired in over a week, chances are there is a blockage in the burners or orifices that is preventing the gas from escaping the burner and reaching the spark. Other causes of this problem are: (1) Bad ignitor. (2) Bad gas valve.
Why is my pool heater not igniting?
The most common cause of swimming pool heaters refusing to start up is a dirty swimming pool filter. A dirty filter or pump basket can restrict the water flow so much that the heater simply can't work.
Does a gas pool heater have a pilot light?
Pilot Light Just like most heating systems, a lot of pool heaters are gas-powered. This means they have a pilot light, and it can blow out just as easily as any home heating pilot light. Check to make sure that your pilot light is lit, if you have one.
How do I reset my Hayward pool heater?
Hayward pool heaters can be reset through the circuit breaker by simply unplugging all connected devices and turning the breaker off and on. When resetting through the interface keypad, just press the MODE button and set the heater on STANDBY before returning it to either SPA or POOL mode.
How do I turn on my Hayward H series pool heater?
0:012:27How-To Operate a Hayward H-Series Pool Heater - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo in order to get to pool mode you just press this button here twice. To select pool mode. MakeMoreSo in order to get to pool mode you just press this button here twice. To select pool mode. Make sure that's lit up and then you just adjust your temperature to where you want it to be.
How do you light a pool heater manually?
0:252:02How To Start and Ignite A Hayward H Series Gas Pool Heater - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis portion here in the valve. And you'll be able to depress it down as you're pressing of theMoreThis portion here in the valve. And you'll be able to depress it down as you're pressing of the valve is controlling the flow of gas. Through the pilot tube to ignite the pilot.
How do I turn on my Hayward Heatpro pool heater?
Push the “POOL” button to activate the unit and then set the pool Heat Pump thermostat to a temperature higher than the current pool water temperature.
How does Hayward pool heater work?
0:021:11Learn About HeatPro Heat Pumps | Hayward Pool Heaters - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd long lasting durability. Especially. Through in a coastal region. Our product line also featuresMoreAnd long lasting durability. Especially. Through in a coastal region. Our product line also features a 140,000 BQ unit heat your pool over a wide range of temperatures. And we also feature a heat.
How do I turn on my Hayward Heatpro pool heater?
Push the “POOL” button to activate the unit and then set the pool Heat Pump thermostat to a temperature higher than the current pool water temperature.
How do I reset my Hayward heater?
Hayward pool heaters can be reset through the circuit breaker by simply unplugging all connected devices and turning the breaker off and on. When resetting through the interface keypad, just press the MODE button and set the heater on STANDBY before returning it to either SPA or POOL mode.
How do you turn on a Hayward pool pump?
How to Operate a Hayward Pool PumpEnsure the hoses are securely attached. ... Check the skimmer water level. ... Add water to the pump basket. ... Open the air valve. ... Confirm that the necessary cleaning agent is in the filter. ... Monitor the filter's pressure gauge and water return flow.
How do you unlock a pool heater?
Reset the breaker for the electrical circuit to the pool heater by flipping the breaker switch to the "Off" position and then to the "On" position. Typically, the breaker is at a disconnect box near in the heater and filter enclosure or may be at the breaker panel for the house.
Step 1
Take the access panel off the side of the A.O. Smith water heater at the bottom, by hand. Set the panel out of the way.
Step 2
Turn the gas control knob on the side of the water heater to the "Off" position, and allow the room to air out for approximately 10 minutes.
Step 3
Set the gas control knob to the "Pilot" position. Push down on the red pilot set button to let the gas run to the burner assembly.
Step 4
Press down on the ignitor button while holding the red set button, until you see the pilot light come on. You may have to press the ignitor button a couple times until the pilot is lit.
Step 5
Hold the red set button down for about a minute after the pilot is lit, slowly letting the button up. Turn the gas control knob to the "On" position.