Locate the magazine release (usually a button or buttons near the bottom of your staple gun on the opposite end from where the staples come out). Release the magazine by pressing the button or squeezing and pulling. Turn staple gun upside down to load the staples (the legs should be facing up toward you when you insert them into the staple gun).
How to use a staple gun load?
The staple gun load consists of the following steps: To put your staples in your tool, turn your staple gun upside down by keeping its face forward from where staples eject out and keeping its back in front of your face. At the back end, there is a little clip that you will squeeze. When you press this little clip, it will release a rod.
How do you test a stapler?
Test the staple gun on a piece of paper or wood. To make sure the staples are loaded properly, fold a piece of paper in half or use a scrap piece of wood or fabric. Place it under or inside of the stapler and pull the trigger to release a staple. Make sure the staples are firing smoothly with no jams.
How do you lock the trigger on a staple gun?
Unplug the staple gun and lock the trigger before you begin loading it. Pull the plug out of the wall, and find the trigger lock just behind the trigger that you would use to release a staple. Shift the lock to the left or right, or press it toward the trigger to lock the trigger in place. Your gun may not have a trigger lock.
How do you load brad nails in a staple gun?
If you’re using the staple gun to fire brad nails, look at the magazine rod. It should say something like “Load brads” with an arrow facing up or down. Lay a row of brad nails against the side if the compartment that the arrow is pointing toward.
How do you load a 3 in 1 staple gun?
0:160:58How to load the JT21CM All Purpose Staple Gun - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut both fingers in the bot on the bottom of this of the pusher run push it in and down to releaseMorePut both fingers in the bot on the bottom of this of the pusher run push it in and down to release the pusher rod take the rod. Out. Use your JT 21 staples fold them on to the rail.
How do you load a staple gun?
1:198:44How to Use a Staple Gun - Staple Gun Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipFrom out of the box there and just slides in the back there you can let them slide down you can hearMoreFrom out of the box there and just slides in the back there you can let them slide down you can hear that get this slider again with the spring.
How do you load a bottom load staple gun?
0:090:40How To Load A Bottom Load Staple Gun - YouTubeYouTubeStart of suggested clipEnd of suggested clipMy first piece of advice is turn the tool upside. Down before you load otherwise it loses tables. SoMoreMy first piece of advice is turn the tool upside. Down before you load otherwise it loses tables. So I need to load staples. Turn it to up open my latch pull magazine.
How do you load staples in a gun tacker?
0:070:42How to put staples in my Amtech Staple Gun - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe answer is quite easy at the back of the tool is a little spring-loaded. Bracket you push it inMoreThe answer is quite easy at the back of the tool is a little spring-loaded. Bracket you push it in and down and out comes the staple shoot. You then insert your staple. Into the end insert.
How do you use a manual staple gun?
0:233:37How to Operate a Staple Gun - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we're going to take staple gun push. The tip down. And pull it out there you go again. Hold theMoreSo we're going to take staple gun push. The tip down. And pull it out there you go again. Hold the tip down firmly squeeze. I got pretty big hands pretty big arms.
How do you load an electric staple gun?
0:091:33How To Load Arrow's T50ACN Electric Staple Gun and Nailer - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure the legs of the staple are facing up towards the ceiling place the strip of staples intoMoreMake sure the legs of the staple are facing up towards the ceiling place the strip of staples into the magazine. If you're nailing you'll need a strip of 5 8 inch 18 gauge brad nails.
How do you load a t50 staple gun?
0:031:04How to Load Arrow's T50 Staple Gun - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst you need to remove the pusher by pushing in and completely removing it from the tool. Then youMoreFirst you need to remove the pusher by pushing in and completely removing it from the tool. Then you take a fresh strip of arrow t-50 staples and insert them on to the guide rail.
How do you put staples in a mini stapler?
0:001:15Rapid Fashion Eco Mini Stapler with Staple Remover - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is the rapid fashion eco mini stapler with stable remover it's a tiny little stapler to loadMoreThis is the rapid fashion eco mini stapler with stable remover it's a tiny little stapler to load staples open the cover and insert about a quarter sized staple strip then close it up.
How do you put staples in a staple?
2:003:31How To Refill A Stapler-Tutorial For Putting More Staples In - YouTubeYouTubeStart of suggested clipEnd of suggested clipRight the prongs. Go down the flat side is the side that you see so as you can see right here thisMoreRight the prongs. Go down the flat side is the side that you see so as you can see right here this is all the flat. Side okay as you can see right there's all the flat side that faces.
How do you put staples in a heavy duty stapler?
0:210:34Swingline Deluxe Heavy Duty Stapler Demo - SWI-39005, SWI-39002YouTubeStart of suggested clipEnd of suggested clipSimply pull out the lever in the back slide them in and load it back up that's it that's the deluxeMoreSimply pull out the lever in the back slide them in and load it back up that's it that's the deluxe heavy duty stapler by Swingline for more demos reviews.
What is the screw for on a staple gun?
The pressure screw (C) may be adjusted so that it will apply the appropriate force to the staple, or nail, depending upon the material being stapled. Note: The softer the material, the less force will be required to drive in the staple or nail. Excessive force may damage the material being stapled.
What is the screw for on a staple gun?
The pressure screw (C) may be adjusted so that it will apply the appropriate force to the staple, or nail, depending upon the material being stapled. Note: The softer the material, the less force will be required to drive in the staple or nail. Excessive force may damage the material being stapled.
How do you load a heavy duty Stanley stapler?
0:211:13Stanley Heavy-Duty Staple Gun | Screwfix - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's got a great little feature here as well there's a locking catch on the handle. So to engage theMoreIt's got a great little feature here as well there's a locking catch on the handle. So to engage the staple ready to go simply depress the lever under the catch.
How do you put staples in a mini stapler?
0:001:15Rapid Fashion Eco Mini Stapler with Staple Remover - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is the rapid fashion eco mini stapler with stable remover it's a tiny little stapler to loadMoreThis is the rapid fashion eco mini stapler with stable remover it's a tiny little stapler to load staples open the cover and insert about a quarter sized staple strip then close it up.
How to load Air Staple Gun?
The procedure to load air staple gun varies a little from the other two types of guns. You can load an air staple gun either through the loading system present above or below.
Which is the best Staple gun?
The best staple gun depends on the work you require from it. If you are looking for a staple gun that can be used to deal with the furniture or upholstery of your house, then the mechanical staple gun would be ideal.
FAQs
Your staple gun might not be working because any part of it might have worn out.
How to load a manual staple gun
You can use this type of staple gun manually, as the name suggests, only requiring just the strength of your arm muscles. This method is very easy to work with, considering it’s very mobile. This manual staple gun is easy to carry around, compared with the other two types; Electric and pneumatic, since you don’t need any power cord or battery.
How to Load an Electric Staple Gun
Electric staple gun operates through electricity, that’s right! You guessed right. You can use this staple gun for framing pictures, padding carpets, and ceiling tiles. Most crafters and carpenters love the type of staple gun device. Also, you can use it as a brad nailer for firing braid nails.
How to Load a Pneumatic Staple Gun
You can use a pneumatic staple gun in construction workloads to force staples into hardwood materials like metal. Most pneumatic staple guns use compressed air to allow heavy-duty staples into objects.
Frequently bought together
These items are shipped from and sold by different sellers. Show details
Special offers and product promotions
Amazon Business: Make the most of your Amazon Business account with exclusive tools and savings. Login now
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
How to Load a Staple Gun of Any Model
If you’re a new homeowner, or just getting your feet wet in the do-it-yourself craze, you’ll soon find yourself needing a staple gun. Staple guns just make life easier. But if it’s your first time using one, you will first need to learn how to load a staple gun.
What Are the Different Kinds of Staple Guns?
There is more than one kind of staple gun out there and each different type of staple gun is loaded in slightly different ways. The main types are manual, electric, and pneumatic, and there are also specialty upholstery guns, which can be of any of the three types.
Finding the Right Staples
If the closest you’ve ever come to using a staple gun has been using a desktop stapler in the office or at school, you might be surprised to learn that there are no “standard” staples for staple guns. One of the most important aspects for understanding how to load a staple gun is finding the right staples for your stapler and your project.
How to Load a Staple Gun
There are a few different ways to load a staple gun and the right one for your stapler will depend on which kind it is. Most staple guns are loaded one of three ways: from the rear, the bottom, or the front.
Conclusion
There may be some differences in the process depending on the model, but, luckily for DIYers everywhere, most staple guns make it remarkably simple to load new staples into the gun. The trick is finding the release mechanism on your specific staple gun and making sure to always use the correct series of staple for your brand of stapler.