How do you make a clay teapot by hand?
- Throw the ball of clay on the wheel and form the desired teapot shape.
- Flip the teapot over and draw a line all the way around it, about 3/8-inch from the top.
- Roll out a slab of clay and attach it to the bottom of the teapot.
- After the teapot is cool, apply wax resist to the bottom.
Full Answer
How do you make a slab teapot?
To form the slab teapot, you’ll need a bisqued or plaster dome-shaped hump mold (in order to make this project fit into a class period, the mold should be absorbent) and a container to put the mold on. Lastly, it is helpful to have a piece of cardboard to support the bottom of the teapot on to make moving it around easier.
How do you glaze a teapot?
After the teapot is cool, apply wax resist to the bottom. Glaze it by holding it with tongs and dipping it in a large container of glaze. Using a brush and a glaze of a different color, add a design to the sides of the teapot.
How thick should clay be for a teapot?
Since the teapot will be built using soft slabs, the slab should be approximately 1/4 inch thick. Save the leftover clay for a knob, supports for propping up the handle and spout if needed, and decorations. Cut out a section of the slab roughly large enough to cover your mold.
Can you learn how to make a teapot in one class?
The beauty of this ceramic lesson plan for teachers is that students can learn how to make a teapot in one class period. If you’re not a teacher, it’s a fun little project to experiment with if you’re needing a break from your usual routine.
How long is a teapot ceramic lesson?
This 30-minute teapot ceramic lesson plan offers an opportunity for instructors to talk about teapot mechanics, while allowing students to experiment with design elements. It seems easier for my students to learn how to make their first teapot with handbuilding techniques because they have more control over the forms and sizes.
How to make a spout out of clay?
With brush handle or chopstick, roll up a thinner sheet of clay into a tube. Rock the spout gently on a flat surface to make it look even and round. Make a few spouts to choose from.
How to keep a teapot lid from falling off?
Place supports under the spout and handle if needed. Place a piece of paper in between the support and the handle or spout so that it does not stick. Make a small air hole on the lid to allow liquids to pour more smoothly. Attach a stopper on the bottom of the lid to prevent the lid from falling off when the teapot is tilted.
Why won't my teapot lid fit?
Sometimes the lid will not fit if it was separated during the drying process due to warping. It is safer to let the whole teapot dry and go through the bisque firing as one piece.
How to make a teapot out of clay?
1. Sketch a teapot shape on paper to serve as a guide. 2. Weigh 3 to 4 pounds of clay and wedge it well to remove all the air pockets. 3. Throw the ball of clay on the wheel and form the desired teapot shape. Squeeze the sides and push it up and down until the clay is centered.
How to make a teapot with wax resist?
After the teapot is cool, apply wax resist to the bottom. Glaze it by holding it with tongs and dipping it in a large container of glaze. Using a brush and a glaze of a different color, add a design to the sides of the teapot. Let it dry for 24 hours.
How to make a clay sandbox?
12. Pull a handle from a ball of clay. Pull 2 pounds of clay up and down with your hands until you have the desired handle shape, and attach it so that it resembles an arm resting on a hip. 13. Attach a piece of clay to the lid and carve it with a wooden rib to make ridges in the top for lifting off the lid. 14.
How long does it take for a potted plant to dry?
7. Pinch the pot to give it an arched appearance. Push out from the inside to give it a voluptuous body. Let dry for 24 hours.
What were the rods used to make the lampwork necklace?
Clay and glass rods were shaped to create this lampwork and ceramic necklace.
