Cut one 12-inch piece of clear plastic pipe for the corner with the shears. Choose pipe that fits inside the curtain rod. Pipe measurements are listed as the width of the opening of the pipe and the thickness of the walls alter the size of pipe required to fit into the curtain rod.
Full Answer
How to make your own set of DIY curtain rods?
Instructions
- Determine the width of the curtain rod for the window.
- Create the metal curtain rod brackets using the material.
- Cut the conduit pipe to the predetermined width.
- Spray paint all the curtain hardware.
- Install the brackets onto the wall and place the rod.
How to make a cheap, Awesome, DIY curtain rod?
Instructions
- Cut the electrical conduit to length. ...
- If you choose to paint your curtain rods, it is easiest to paint each of the pieces before assembling the DIY curtain rod brackets. ...
- Once the primer is fully dry, paint each component with a few thin coats of your chosen spray paint.
- Align the hold of each one-hole strap with the last hole of each corner bracket. ...
How to create an extra long curtain rod?
How to make extra long curtain rods from black iron pipe. Assemble your curtain rod on the floor. Screw together the floor flange with the ¾"x4" black iron pipe, attaching the black iron 90 to the end. Continue for both ends and then attach your full-length black iron pipe to the middle, creating a fully assembled curtain rod.
How high do you Mount curtain rods?
One rule of thumb is that they should sit 4-6 inches above the window frame. What is the proper height for a curtain rod? A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly.
How do you make a curtain rod bendable?
How to Make Your Own Bendable Curtain RodCut the Rod Sections. Cut two sections of hollow, metal curtain rod with a pipe cutter. ... Create the Corners. Cut one 12-inch piece of clear plastic pipe for the corner with the shears. ... Connect the Corners to the Rod. ... Mount the Brackets. ... Adjust the Curtain.
What can I use instead of a curtain rod?
Pipe Rods. This one is a pretty common alternative. Many people turn to copper pipes when they need a substitute curtain rod. Copper pipes have a unique look about them which is what draws many folks toward it, but you can use any style of or look of pipe.
How do you bend a metal curtain rod?
0:062:48How to Bend a Fineline Metal Curtain Track - - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd we're going to try and get a 90 degree bend here and i'm going to gradually build that up. SoMoreAnd we're going to try and get a 90 degree bend here and i'm going to gradually build that up. So this is the top of the track which the bracket clicks onto. That's the face. And that's the back.
How do you make a homemade curtain rod?
How to Make a DIY Curtain RodMeasure your window. ... Cut your pipe. ... Paint the rod. ... Paint your hardware. ... Attach your brackets to the wall. ... Attach your curtain rings to the rod. ... Attach your finials to the rod. ... Attach your curtain and place your rod on the wall.
How can I hang curtains without a tension rod?
To hang curtains using a damage-free installation method, try one of these options:Secure the hardware with adhesive hooks. Adhesive hooks or adhesive strips are versatile hanging tools you can purchase in various sizes and strengths. ... Use magnetic curtain rods. ... Use tension rod curtains inside window frames.
How do you cover a window without a curtain rod?
Five Creative Ways to Hang Curtains Without RodsUpholstery tacks.Tension cables.Hook-eye screws and drapery pins.Staples and furring strips.Cabinet knobs.
Is aluminum rod bendable?
With an acetylene torch, you can bend an aluminum rod to fit your needs. Aluminum is a lightweight metal with a strong weight-to-strength ratio that makes it useful in many manufacturing processes from auto aftermarket installations such as roll bars to the construction of hiker backpacks.
How do you make a curved curtain rod out of PVC pipe?
1:013:44How to make PVC curtain rods - YouTubeYouTubeStart of suggested clipEnd of suggested clipStraight I'm just going to pick out the straightest portions of them and then just cut cut cut themMoreStraight I'm just going to pick out the straightest portions of them and then just cut cut cut them and tighten them let's see what it looks like.
How do you support the center of a curtain rod?
To reinforce your curtain rod brackets and secure your curtain rod, try these methods: Use curtain rod anchors or longer screws. Use a thicker or more durable curtain rod. Install one or more center support brackets.
How do you make an adjustable rod?
2:3616:32DIY Adjustable Torque Rods - YouTubeYouTubeStart of suggested clipEnd of suggested clipStraight as possible and then lay it down wrap it around oops pull off so just make sure those linesMoreStraight as possible and then lay it down wrap it around oops pull off so just make sure those lines line up like right there we're good so that's pretty straight.
How do you make a dowel curtain rod?
InstructionsStep 1: Choosing a dowel rod. Choose a dowel rod that is slightly longer than your window. ... Step 2: Sanding the dowel. ... Step 3: Cut the leather. ... Step 4: Measure and mark off. ... Step 5: Hammer nail through leather and hang curtain.
How do you hang curtains cheaply?
7:199:11CHEAP Way to HANG Curtains & Drapes - DAD HACK - YouTubeYouTubeStart of suggested clipEnd of suggested clipLike an 8-foot section 8-foot section but we also did it so we could add another anchor into theMoreLike an 8-foot section 8-foot section but we also did it so we could add another anchor into the wall. And it doesn't really affect any of our tricks. Because you always told drapes and in pairs.
How do you make cheap curtain rods?
2:199:2610 DIY Curtain Rods Ideas That Will Upgrade Your Window - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd thread it put together one corner then add your curtain before adding the other then haveMoreAnd thread it put together one corner then add your curtain before adding the other then have someone help you hold the curtain rod in place and use a drill to attach it to the wall easy.
DIY Curtain Rods
These DIY curtain rods are cheap and easy to make, even if you need to fit extra long windows. You can easily make any size curtain rods you need in any finish.
DIY Curtain Rods for Large Windows
A budget friendly way to make your own DIY Curtain Rods - Use electrical conduit, paint, and add decorative finials. These are a great alternative to the high prices of rods for large windows.
DIY Industrial Curtain Rods
Learn how to make your own DIY industrial curtain rods for a fraction of the cost.
How to Make Long Curtain Rods for Sunrooms and Big Windows
Are you struggling to find a long curtain rod for large windows or a sunroom? Extra-long curtain rods can cost a pretty penny, but this DIY long curtain rod is a simple, affordable, and stylish solution.
DIY Wooden Curtain Rod and Brackets
Make your own quick & easy DIY wooden curtain rod and brackets for a fraction of the cost!
Easy and Cheap DIY Curtain Rods
These budget-friendly DIY curtain rods are easy to make and the perfect alternative to a custom-length curtain rod!
DIY Long-Length Curtain Rods
If you have a very large window, curtain rods can get expensive. See how you can make your own DIY curtain rod out of pvc pipe to add to an existing rod and save tons!
What is a bendable curtain rod?
Bendable curtain rods are much different than the standard curtain tracks you have seen for many years. A bendable track is going to allow you to shape the track so it fits the curves and contours of your window and frames perfectly.
What is a rod made of?
Having rods that are made of flexible material allows you to fit any type of area that you need to fit so you can be sure that it looks attractive. The rods are made of high-quality material and built to last so you will not have to be concerned about replacing equipment all of the time.
Where do couplers sit on a curtain rod?
The coupler will sit in the center support rod , with the screws pointed towards the wall and won’t really be visible. You won’t need to worry about the curtains gliding over it.
How to make curtains slide smoother?
Before putting up the curtains on the rod, add some paste wax with a cloth or paper towel to the top half of the curtain rod to help make sure the grommets slide nice and smooth every time you open and close the curtains.
What scrubber pad to use for conduit?
Use a Scotch Brite scrubber pad to sand the conduit pieces.
How to test fit a finial?
At this point, you’ll want to test fit the finial by pushing it into the open end of the conduit. If you run into fitting trouble, you can trim the cork with a utility knife. Or just try another (smaller) cork.
How to shorten a cork?
Using a utility knife and working over a cutting board or surface that is safe to cut on, shorten a cork.
Can you extend a curtain rod on either side of a large window?
If you want to extend your curtain rod on either side of a large window (and believe me, you really do), or you have a couple of windows to dress, you either need to
