To make the milky spore dispenser, take an old coffee can, clean and dry it, then punch a few holes in the bottom of the can using a hammer and nail. Then tape it to the bottom of a stick. A 3-4' long stick depending on your height will eliminate any bending over while applying the powder.
How do you make a milky spore dispenser?
To make the milky spore dispenser, take an old coffee can, clean and dry it, then punch a few holes in the bottom of the can using a hammer and nail. Then tape it to the bottom of a stick. A 3-4' long stick depending on your height will eliminate any bending over while applying the powder.
How do you apply milky spore to your lawn?
Pour your Milky Spore into a lawn and garden dispenser, which is a tube that will dispense the powder evenly when you tap the ground with it. Apply the powder every 4 feet in a grid formation around your garden. Then, water the ground lightly to help the powder soak into the soil.
When should I apply milky spore?
Although it’s best to apply Milky Spore in the early fall, you can apply it any time as long as your soil is at least 65 degrees Fahrenheit. Pour your Milky Spore into a lawn and garden dispenser, which is a tube that will dispense the powder evenly when you tap the ground with it.
How to apply milky spore for grubs?
While it does take more applications, this method of how to apply milky spore for grubs is much easier on the back, and you don’t need to picture a grid on your lawn where to drop the powder. The granular type is made to be used with a drop spreader, hence the ease of application.
See more
What is the best way to apply milky spore?
Since you have to apply milky spore all over your lawn, the easiest way to do it is to use a lawn and garden dispenser (a long, tube-shaped device with holes in the bottom that you can build yourself or find online for around $10) or a drop spreader. Never use a broadcast spreader for milky spore.
Can you apply milky spore with a spreader?
Milky spore powder is very fine, and cannot be spread with a broadcast spreader. A drop spreader places milky spore on the lawn in spots where it will be watered into the soil and moved through it by Japanese beetle grubs.
How long does milky spore take to work on grubs in lawn?
In areas treated by Milky Spore, Japanese beetle grub eat the spores during their normal feeding patterns. Then the spores reproduce inside the grub, eventually killing grub within 7-21 days. As the grub decomposes, it releases millions of new spores and these multiply and kill other grubs.
How often should you apply milky spore?
Milky spore powder is typically applied in a matrix pattern, a teaspoonful every four feet in rows four feet apart. Some newer formulations allow for application through a drop spreader. It is much easier to apply but must be applied three times a year for two years as opposed to just once.
Can you put down too much milky spore?
decklap. Generally I'd say that there is no danger in over applying Milky Spore as long as its not smothering your grass.
How do you spread granular milky spore?
InstructionsFill the drop spreader with the Milky Spore Granular.Apply uniformly over the treatment area. ... Spread over the treatment area at the rate of 1 lb per 350 sq. ... Water the treated area and/or apply beneficial nematodes within 24 hours of application to soak spores into the soil.More items...
Will milky spore get rid of moles?
The best long-term control is Milky Spore. Safe for the environment, this natural spore is harmless to fish, birds, bees, animals, plants and people. It kills grubs in the soil and remains active in the soil for up to 15 years. This is a great long-term solution for moles.
How long can you store milky spore powder?
In warm climates good control can occur in one to three years. In colder areas like New England, three to five years. Once established in a lawn, Milky Spore has been known to last 15 to 20 years.
Does milky spore expire?
Answer: Milky Spore Powder has a shelf life of 3 years.
Can milky spore be used in a vegetable garden?
Milky spore disease is specific for Japanese beetles and it won't harm humans, other animals, or plants. It is safe to use on lawn and ornamental plants as well as vegetable gardens. There is no risk of contamination due to runoff into bodies of water and you can use it near wells.
What is the difference between milky spore powder and granules?
Using the powder requires only one application of the less expensive powder. Using milky spore granules requires 6 applications over 2 years. Using milky spore granules means you do more work and spend about 5 times as much money on granules than you would by using the powder.
How well does milky spore work?
It was credited with decreasing Japanese beetle populations by 90 to 95 percent. Ever since, Milky Spore has been regarded as an effective control for Japanese beetles. In recent years, scientists have attempted to reproduce the results of the 1940s with no success.
How to spread milky spore?
To spread the powder, use a lawn and garden dispenser to apply Milky Spore every 4 feet (1.2 m) in a grid pattern across your yard. Lightly water the soil so that the powder is absorbed, and enjoy a grub-free lawn after 1-3 years. Steps.
What is milky spore?
Learn more... Milky Spore is a natural pest control that targets grubs such as Japanese beetles. Spread the powdered pores over your lawn. Once the grubs ingest the spores, the spores multiply and eventually rid your lawn of the grub infestation.
How long does it take for milky spore to work?
It can take a couple of years to fully get rid of your grubs, but the Milky Spore should work for at least 10 years without needing another treatment.
How to get milky spore off the ground?
If you’re watering the ground yourself, use a spray hose with a softer spray setting — you don’t want to spray the ground so intensely that the powder washes away. If you're applying it before rain, make sure the rain is going to be light as opposed to a heavy storm that will wash the Milky Spore away.
How long does it take for grubs to die?
It could take a couple of years for your entire yard to be free of grubs.
What does it mean when your grass turns brown?
Look for sections of your lawn that are yellow or brown. If your grass starts turning yellow, and then brown, it’s likely that it’s infected with grubs. If sections of your grass are completely dead, Milky Spore will likely help. This often happens in the late summer.
How to check the temperature of soil?
To check the temperature of the soil, stick a metal thermometer roughly 3 inches (7.6 cm) deep into the soil. If the soil is below 65 °F (18 °C), the grubs won’t be feeding and the powder won’t be ingested. The soil doesn't need to be damp or wet for you to apply the Milky Spore. ...
How to use milky spore dispenser?
To use the dispenser, simply hold onto the stake and tap the surface of the lawn to dispense a round circle of milky spore. The Resources section contains a link explaining detailed application techniques. To use the dispenser, simply hold onto the stake and tap the surface of the lawn to dispense a round circle of milky spore .
What is milky spore?
Milky spore is a fungus that kills the Japanese beetles and their larva by acting as a natural pesticide. Because you need to spread milky spore evenly across your lawn, you must use a dispenser. Although you can purchase dispenser tubes at any home improvement or garden center, making a dispenser is much easier and cheaper.
How to attach a coffee can to a can?
Turn the can over so that the bottom is resting on the surface . Place a 4-foot-long stake along the side of the can and attach it to the can using professional strength glue. Make sure that the bottom of the stake is slightly above the bottom of the coffee can. Allow the glue to dry thoroughly. Remove the lid from the coffee can ...
How to make a hole in a can?
Place the point of a nail on the bottom of the can and use a hammer to pound the nail 1/4 inch into the can to create a hole. Remove the nail from the can and place it in another location on the can bottom. Continue creating approximately 15 evenly spaced holes in the bottom of the can.
How to get rid of Japanese beetle in lawn?
Spread milky spore across the surface of your lawn to counteract Japanese beetle infestations. Place the point of a nail on the bottom of the can and use a hammer to pound the nail 1/4 inch into the can to create a hole. Turn the can over so that the bottom is resting on the surface. Place a 4-foot-long stake along the side ...