how do you make a planter box out of pallets

1. Decide how big you want your planter to be. If you want a square box, you could use 20 in (51 cm) pieces, along with skinnier pieces for a ...
2. Take the pallet apart until you have planks and wooden blocks. ...
3. Build the base with 2 longer planks and several shorter planks. Lay out 2 long planks parallel to each other.
4. Begin building the walls up. When putting your side walls in place, try to offset them at the corners.
5. Put in corner posts to stabilize your work. Place a small piece of wood in each corner of the box and nail them into the bottom with your nails ...
6. Continue building the walls up. As you build up, continue to offset the boards but alternate which board goes to the corner on each layer.
7. Sand and paint your planter as desired. Use heavy sandpaper to sand the rough edges of your planter down.

How to make a pretty pallet planter?

how to build a pallet planter

• Wearing hand and eye protection, cut the pallet into three equal pieces. ...
• Remove the planks from the reverse sides of each piece. ...
• Assemble the three pieces into the main sides of the planter, front, back, and bottom. ...
• Using the smaller planks taken from the reverse side of the pallet, create the two short sides.

How to build a DIY modern planter box?

materials

• Step. The easiest way to begin is by constructing a frame around a storebought planter. ...
• Step. Using your saw, begin cutting your 2x4s according to the proper measurements. ...
• Step. Using a Kreg pocket hole jig, create holes in each of your 2x4s. ...
• Step. ...
• Step. ...
• Step. ...
• Step. ...
• Step. ...
• Step. ...
• Step. ...

More items...

How to make a simple planter box?

Steps to Make a Raised Planter Box

• Cut boards to size
• Screw wood screws in sides of boards, connecting sides. ...
• Lay the box on the ground and measure out the weed barrier.
• Lay the first box on top of the weed barrier.
• Add Stakes on four corners. ...
• Build second box by screwing wood screws into four boards as you did with the first box.
• Lay the second box on top of the first.

More items...

How to turn a pallet into a planter?

Method 2 Method 2 of 3: Making a Planter from Pallet Sections

1. Cut a pallet into thirds. Start with a pallet that has 6, 9, or 12 planks across the front, as that will make it easier to cut into thirds.
2. Pull off the small slats on the back of the side pieces. ...
3. Remove the planks and wooden blocks from the center piece. ...
4. Cut off the edges of the planks that stick out on the center piece. ...

More items...

How to make a pallet planter box?

Nail one more slat (either removed from the top, from another pallet, or pieces of one-by-four lumber) to the bottom of the pallet, lining it up with the sideways slat you secured in the middle of the planter in step four. If necessary, add back slats to the top and bottom planters, too, though they may already be in place, depending on the style of your pallet. You should now have three finished planter boxes.

How to lay pallets down?

Lay the pallet down, with the top flat against the ground and the bottom facing up.

How to make a pallet with stringers?

Turn the pallet vertically on one side, with the bottom deck boards facing you. Orient the pallet with the deck boards running horizontally (or parallel to the ground) and the stringers running parallel to you.

How many deck boards are there on a pallet?

Bottom Deck Boards: On the bottom are five deck boards for the larger 40-inch pallets and three deck boards for the smaller 30-inch pallets. As a pallet planter, the bottom deck boards will form the backs of individual planter boxes.

How do you know if a pallet is built?

When you stand a pallet on end and look at it from the back, you will notice that a number of the horizontal boards line up with each other: one in front, one in back. These will become the walls of the planter boxes —already built.

What do the top deck boards do in a pallet planter?

After conversion to a pallet planter, the top deck boards will form the planter's front wall. Bottom Deck Boards: On the bottom are five deck boards for the larger 40-inch pallets and three deck boards for the smaller 30-inch pallets. As a pallet planter, the bottom deck boards will form the backs of individual planter boxes.

What are the components of a pallet?

Basic Wood Pallet Components 1 Top Deck Boards: Pallets that are 48 inches by 40 inches usually have seven top deck boards and 30-inch by 30-inch pallets have five top deck boards. After conversion to a pallet planter, the top deck boards will form the planter's front wall. 2 Bottom Deck Boards: On the bottom are five deck boards for the larger 40-inch pallets and three deck boards for the smaller 30-inch pallets. As a pallet planter, the bottom deck boards will form the backs of individual planter boxes. 3 Stringers: Stringers are the two-by-fours that run perpendicular to the top and bottom deck boards. There will be two side stringers and one center stringer. As a pallet planter, the stringers will form the sides of individual planter boxes.

How to break pallets apart?

Breaking the pallets apart takes a decent amount of work. Use a jig or circular saw to cut the ends. Pry the wood from the center support. This should give you 8 to 14 boards per pallet. Remove nails from slats.

How thick are pallets?

When searching through the pallet stack, look for the pallets with the most usable wood. The length of the slats is ~ 3 feet. The thickness varies from ½ to ¾ thick. The width of the slats can vary from 2.5 to 6 inches.

What is the best way to line a wooden pallet planter box?

A liner is typically made up of plastic, which is the best option to line a wooden pallet planter box and is placed in-between the pallet and soil to prevent moisture from seeping through. A liner may also be required for plants that require more water or those where damp soil can damage the roots.

What should I use to line a wooden planter box?

A liner is typically made up of plastic, which is the best option to line a wooden pallet planter box and is placed in-between the pallet and soil to prevent moisture from seeping through.

Can you make planter boxes out of pallets?

Yes, you can make DIY pallet planter boxes! These planters are easy to make so they're perfect for any budget or skill level!

How to keep pallets moist?

Line the bottom of your pallet planter box with plastic - This at least allows for drainage and you can add some water retention crystals to keep things moist.

How to hold pallet plank together?

Use the clamps to hold your pallet plank together while the glue dries;

How to keep wood planks from drying out?

Apply paint or stain on the wood - The oils in the paint should help seal up the planks and keep them from drying out.

Do pallet planter boxes need to be lined?

Yes, pallet planter boxes should be lined with appropriate material. It's important to line your box in order to keep the soil contained and well-drained. If you don't do this, a lot of water can build up in the bottom of the planter, which could cause rotting and/or rots fungus growth, which will lead to

1. Wood Pallet Planter Box

Are you interested in over-the-ground gardening? It has several different benefits of the ground garden, but it always demands some planter boxes or raised garden beds. So, repurpose the pallets to build lasting longer wooden planter boxes. You can easily clone the given samples that grace up the front porch area.

2. Strawberry Pallet Planter Box

Pallets have a long life even when exposed to harsh outdoor climates. So, it will be a great idea to repurpose the pallets to build this DIY strawberry planter. You need a suitable pallet, electric drill, screws and hand saw to complete this project. However, you can paint this planter also for added visual grace.

3. Upcycle Old Pallets Into Planter Boxes

The colorful and decorative pots are often to add to your front porch and patio for added visual details. So, following guides about building the lasting longer and colorful patio planters out of pallets will be a great addition to one’s patio.

4. Pallet Planter Box For Deck

This pallet planter hack will surely turn your porch area into mini heaven. Yes, it involves building the porch or balcony fence planters out of pallets, making it an easier and quicker project. Just cut apart the very bottoms of the pallets with 1 or 2 deck boards and then mount it on the garden fence for added visual grace and charm.

5. Pallet Planter Box Plan

Follow here complete instructions to build a lasting longer wood planter for a small space. It will only take 2 pallets to build this gorgeous wooden planter. The required tools for the project will be a hammer, saw, large crowbar and a staple gun.

6. Pallet Vegetable Planter Box

Whether you are looking for a great garden-raised bed or an extra-large planter box, you will learn here to build both with pallets. You will love this extra-large planter box that can be partitioned for different types of growings simultaneously. The whole is made of dismantled wood pallets and will be more than easier to build also.

7. Triangle Pallet Planter Boxes

Intending to give a geometrical décor touch to your front porch or balcony area? Then duplicate these triangular wooden planter boxes, quite something quick and easy to build, and they can be painted or left blank to fit best to your patio decors.

How Do You Make a Planter Out of a Pallet?

Before we show you some of the coolest pallet planter creations on the market, you may be wondering how you go about making a pallet out of a planter. Don’t fret, as it is actually quite easy. Just follow these steps below.

How to make a pallet garden?

Here you can find out how to make a pallet garden in seven easy steps. First , you need to knock out every other top board from a long pallet. Then nail a tarp to the bottom of the pallet and poke holes so the water can drain out. Add the dirt, plant the seeds and wait. You can also cut out some letters to spell “garden” and to make laminated labels for everything you’ve planted.

What is a pallet herb garden?

A pallet herb garden can be super simple and still look lovely. This one is made from a single pallet with no need for extra boards. It has only three layers which are actually perfect because it leaves plenty of space for taller herbs like rosemary or thyme to grow. What’s really cute about it though is the use of chalkboard paint. It lets you label your plants in a super simple and convenient way.

How long does a pallet last?

When making a wood pallet planter, you should expect it to have a lifespan of about 3-5 years before it will begin to rot and you will need to replace it.

How long does it take for pallet wood to rot?

Yes, pallet wood typically begins to rot within 3-5 years of the creation of the pallet. Your pallet may rot faster when you live in a moist and rainy climate.

Can you use pallets to make planter holder?

Let’s start with something simple: a vertical planter holder which you can easily put together using a wooden pallet. You can either use an entire pallet as it is or you can cut one to the desired size in which case you won’t need extra boards for the box shelves.

Can you store pallets on cement?

While this may seem counterproductive for a pallet planter, storing your pallet planter on cement or against a wall is much better for it than being on the ground.

What is a wood pallet mounted planter box?

If you are looking for mounted pallets that are built together comfortably, the wood pallet mounted planter boxes will surely make you happy. These boxes look neat and organic for starters. With the boxes on hand, you can easily stylize with your preferred colors and feel. In and of itself, the design exists for the sole purpose of convenience. In terms of convenience, the design/structure efficiently absorbs water leakage.

What is an a frame pallet planter?

It resembles similar attributes to the rest of the vertical planter designs, being a variant of such mechanism. But if you study it closely, the a-frame planter gives a number of treats the typical vertical planter designs cannot.

Why put a tall planter on a porch?

Let me give you perspectives on the sheer importance of putting up a tall planter in your porch. First, it provides warmth. Porch planters are a real deal when it comes to welcoming your guests! Once done putting up, try checking your guests’ faces when they enter your home and you will definitely see big smiles.

Why use HT stamps on pallets?

Use heat treated pallet with HT stamp because it is safer to use in the garden. Those with MB stamps were treated with a dangerous chemical called Methyl Bromide.

How long does it take to build a sandbox?

The total time to finish this project is about 6 hours. The things you’ll need include 3 to 4 pallets, vice grips, hammer, drill, crowbar or pry bar, staple gun, skill saw, or miter saw, landscaping fabric, and treated wood.

Can you frame a barrier planter?

You can always refer to countless options on how you would like to frame your barrier pallet planter . You can pick the wall hanging planter, plain pallet planter, the L-shaped or A-frame pallet planters, etc. There are so much to choose from. And, if you are not in a hurry- I would recommend you to go for a vertically-supported planter. This may take time but mind you- it yields the best structure there is. Prepare to be impressed by the overall décor this mechanism will leave in your backyard!

Can you save wood with triangular planter boxes?

One: it is fresh to the eyes, two: It saves space and finally, three: it requires less effort for assembly. Dimension-wise, you can save a lot of wood with the triangular planter boxes. Complicated as it may appear, there are actually practical methods for assembling your own triangular planter boxes.