How to Create a Tree-Stump Planter
- Start the Planting Hole. Wearing safety glasses, chip away at the center of the stump with the pointed end of a...
- Finish the Planting Hole. As the hole gets bigger, switch to the mattock's wider end. Work your way toward the edges of...
- Drill for Drainage. With a 3⁄8- to 1⁄2-inch-wide auger bit, drill (or use a bit brace, as shown)...
How to make your own tree stump planter?
Jul 13, 2020 · As previously stated, you can design your tree stump planter in various ways. A hollow stump planter is the most common method, where you can simply plant directly into the stump itself. To do this, you will need to hollow it out using a sharp instrument, like an ax or mattock. For those of you handy enough, using a chainsaw may be an option.
How do I make a tree stump planter?
So as a summary: Mark your border with a pencil, about an inch or more in from the edge. Next, use a large forstner bit, drilling down half an inch or so at a time throughout the entire area you're hollowing... Remove shavings as necessary. Then when it's as deep as you want it, …
How to make a tree stump into a planter box?
How to Create a Tree-Stump Planter Start the Planting Hole. Wearing safety glasses, chip away at the center of the stump with the pointed end of a... Finish the Planting Hole. As the hole gets bigger, switch to the mattock's wider end. Work your …
How do you decorate a tree stump?
How to Make a Tree Stump Planter Step 1. Hollow it out from the center using whatever the sharp tool you have like a mattock, an ax (axe) or a chainsaw. Step 2. Work on to make a hole that is 4-8 inches deep and has at least 3 inches border. Step 3. With the help of a …
How do you make a homemade stump?
0:337:41How to Make Your Own DIY Tree Stump Side Table and Save ...YouTubeStart of suggested clipEnd of suggested clipAnd pick out an already dried tree stuff to make her table the curves on Sara's stump table isMoreAnd pick out an already dried tree stuff to make her table the curves on Sara's stump table is gorgeous. So don't be afraid to look for slightly different edges.
How do you make a tree stump out of a flower bed?
Using a hand or power drill, make drainage holes into the side of the stump so that they slope toward the ground. Add some free-draining material, like gravel, and then fill with soil/compost from your garden. Then plant whatever flowers or succulents you want to brighten the place up!Jun 23, 2015
Can I turn a tree stump into a planter?
You can plant seedling or nursery plants or even sow your seeds directly into the stump planter in spring. For additional interest, you can plant a variety of flower bulbs and other plants around it. And that is how you turn a tree stump into an attractive planter for your garden!Jul 13, 2020
How do you make a hollow tree stump?
Hollowing out a StumpSoften the wood of the stump. ... Drill holes across the section of the stump you wish to make hollow. ... Hollow out the stump with your hammer and chisel. ... Smooth the hollowed area. ... Wipe away any debris or dust from your work.Jul 18, 2017
Can you build a raised bed over a tree stump?
Depending on how tall your tree stump is, consider building a raised bed around the area left by the tree. Raised beds are garden structures, often built with stone or wooden railroad ties, that are then filled with topsoil.
What plants can grow in a tree stump?
Petunias, nasturtiums, pansies or whatever you like. If you don't want to make a hole, you can stand pots on a tree stump. Ferns, a variety of wildflowers, cornflower, marigolds, phlox, there are so many options. You can grow other plants around it.
Can I cover a tree stump with dirt?
Once you've cut all of the roots around the stump, lift and remove the stump from the ground. Fill the hole with dirt and cover it with topsoil or mulch.
How do you preserve a tree stump in the ground?
Using a small- to medium-sized brush, apply two or three coats of polyurethane wood sealant over the surface of the stump. Be sure to get the top and all sides. When finished, allow at least 48 hours for the sealant to dry, at which point the stump should be preserved.Oct 9, 2018
How do you hollow out a tree stump with a chainsaw?
0:153:48How to Hollow Out Tree Stumps Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipMy first tree stump was hollowed out actually by hand using a mallet and some chisels. And I wasMoreMy first tree stump was hollowed out actually by hand using a mallet and some chisels. And I was able to do that because when I found this tree stump it was actually rotted out in the center.
How do you hollow out a log for a planter?
Mark the area on the log that you would like to hollow out for a planting space. One effective way to hollow out the log is to use a Forstner drill bit to chew out the center hollow which can then be smoothed out with a hammer and chisel to finish the hollowed area.Oct 5, 2020
How do you make a fairy door for a tree stump?
How to make a fairy doorLine up some lolly sticks or twigs.Glue two sticks diagonally across your 'door' to hold it together.Look for acorn cups or tiny pebbles to be your doorknob and letterbox. Glue them in place. ... When the glue is dry, place your door against a tree trunk or wall.Apr 22, 2019
How do you make a fairy house out of a tree stump?
4:5214:34Making a Tree Stump Fairy House - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what i've done is i've taken one of these little wooden things um and i have put the lollipopMoreSo what i've done is i've taken one of these little wooden things um and i have put the lollipop sticks sort of staggered them at the back. And i think that makes a nice little garden seat.
How to get rid of a stump that has been sitting for a while?
If it is in a shady area, look for plants that thrive in the shade. If the stump or log has been sitting for a while, hollowing it out should be easy. The inside contents should be spongy. You can wet the wood to make it easier to remove the contents as well.
How to keep plants from clumping in pots?
Once an arrangement is decided, remove the plants from the pots and loosen the roots gently if they are clumped. Place the plants in the wood and cover the roots and sides with more soil. Tuck moss around the base of the plants to add a woodsy effect and to aid in water retention.
How to make a tree stump planter?
Instructions to Make a Tree Stump Planter. Choose a location. It is important to take into consideration the location of the stump or log before selecting plants to place in it. If the stump or log is in a sunny area, be sure to choose plants that require full sun. If it is in a shady area, look for plants that thrive in the shade.
Can you switch out flowers for the seasons?
Flowers and plants can be switched out for the seasons just as you would with a window box. Read on to learn how to make a tree stump planter from elements in nature which can be found in your own back yard.
Step 1: A Bad Start
I started out using a 3/4 inch auger bit, but I realized that this was not the best idea, I definitely do not recommend using this bit for this job. I drilled a bunch of holes in the stump then started drilling sideways to join the holes. My hope was that this would break apart the pieces so that I could pick them out.
Step 2: Fixing My Mistake
I got a 2 inch forstner bit and started drilling. Since I have already torn apart the wood so much with the auger bit, it doesn't drill quite like a forstner bit usually does. But the good thing is that it did work MUCH better.
Step 3: Drilling a Little More
I finally get past the part that I messed up, now I just need to deepen the hole. I noticed that a great technique for this is to drill down in one spot about half an inch to an inch, then move the bit to another spot and drill down about the same deep. This makes it easy to keep it cleaned out when the wood shavings build up.
Step 4: Cleaning Up the Edges (optional)
Now I have it about as deep as my drill will let me go. I'm going to clean up the edges a bit with a chisel. I don't want it to be perfect, the imperfections will give it some character. I just want to remove some of the more extreme spots.
Step 5: Taking Some Measurements
I decide to take some measurements. It's about 14 inches wide, by 13 inches wide, about 6 inches deep that I hollowed out, and the overall stump height is about 16 inches.
Step 7: Summary of Steps
Mark your border with a pencil, about an inch or more in from the edge.
Skill
5 Moderate Chipping away at a stump to make the hole requires muscles.
Start the Planting Hole
Wearing safety glasses, chip away at the center of the stump with the pointed end of a sharpened mattock.
Finish the Planting Hole
As the hole gets bigger, switch to the mattock's wider end. Work your way toward the edges of the stump, leaving at least a 3-inch border, to create a hole 4 to 8 inches deep.
Drill for Drainage
With a 3⁄8- to 1⁄2-inch-wide auger bit, drill (or use a bit brace, as shown) drainage holes into the side of the stump so that they slope toward the ground.
Fill and Plant
Add some free-draining material, like gravel, then top it with a mix of 30 percent compost and 70 percent potting soil, and fill the planter with some eye-catching blooms.
Step 1
Hollow it out from the center using whatever the sharp tool you have like a mattock, an ax (axe) or a chainsaw.
Step 2
Work on to make a hole that is 4-8 inches deep and has at least 3 inches border.
Step 3
With the help of a drill, make drainage holes into the side of the stump so that they slope down towards the ground and water will drain from them easily.
Step 4
With all the previous three steps done, your DIY tree stump planter is complete. Now fill it with well draining potting soil that is rich in compost and plants your favorite flowers in it.
A Creative Way to Disguise a Tree Stump
Old tree stumps may take a decade or more to rot away. In the meantime, they can be an eyesore. You can pay to have the stump ground to bits, or create an attractive focal point. Here’s an easy way to do it.
Form the Basket
Use an old wire basket or form one from galvanized steel field fencing cut to size. Cut and fold a portion of the wire fencing inward to serve as the base, then attach it to the stump with wire tacks. To extend the life of the tree stump and discourage insects, apply a preservative, such as polyurethane, to the stump before starting the project.
Pack With Moss
Soften a bale of sphagnum moss by soaking it in water for about half a minute. Fill the perimeter of the basket by compressing the moss in and around the wire frame.
Add Soil
Fill the basket with a soilless potting mix containing fertilizer. For a 4-foot-diameter stump like this one, you'll need about three 2.5-cubic-foot bags.
Moisten the Planter
Tamp the soil gently to remove air pockets, and then moisten to settle the soil. Add more soil mix to the level of the basket rim.
Plant the Basket
Add your choice of plants. This planter includes a tall specimen, such as the burgundy New Zealand flax (Phormium tenax) for the centerpiece or thriller. Surround it with spreading fillers, such as geranium and licorice plant (Helichrysum petiolare) and trailing spillers, such as Nemesia and sweet alyssum (Lobularia maritima).
What does rotten stumps mean?
4. Rotting Wicked Stump. A rotten stump surrounded by asphalt would otherwise only be a symbol of decay.
What is an old stump?
An old stump overcome with fungus and moss is converted into a characteristic planter, hosting bright and vibrant wildflowers. 6. Aged Natural Stumps. These two stumps are somewhat mashed together, but the lush greenery planted around them and colorful flowers planted inside to provide an attractive look.
What color is a stripped stump?
This large stripped stump holds attractive pink and yellow flowers. This design is convenient as it can be moved to wherever you feel your garden needs a little bit of natural color.
Can you cut down a tree?
Whatever reason you may have for cutting down a tree, it is important to know that it does not have to be a completely destructive action against nature! Another tree may be planted to replace it, but a new tree can take several decades or even more to grow.
