- Cut out the fabric. Cut four pieces of fabric 18″ x 7″. They can be all the same fabric, or a variety of fabrics. ...
- Sew fabric bags. Here we are using a 1/4″ seam allowance to create a generous sized bag. ...
- Stitch and trim corners to make bag shape. Pin the side seam and bottom seam together to make a triangle and mark a horizontal line 1.5″ from the ...
- Press top edges. Press the top edges of both fabric bags over toward the wrong side, about 1/2″. ...
- Pin and stitch channel for drawstring. To mark the channel for stitching, pin the two bags together along the mid-point of where the channel will be.
- Sew top edge. Sew the top edges of the bag together. This is a spot where you can easily add embellishment like ribbon, ricrac or other trims.
- Insert the drawstring into the channel. Cut two pieces of ribbon, each about 24″ long. ...
How to make a wine bag?
How to make a wine bag. 1 Step 1: Cut out the fabric. Cut four pieces of fabric 18″ x 7″. They can be all the same fabric, or a variety of fabrics. This method will end up with ... 2 Step 2: Sew fabric bags. 3 Step 3: Stitch and trim corners to make bag shape. 4 Step 4: Press top edges. 5 Step 5: Pin and stitch channel for drawstring. More items
How do you make a wine bottle cover?
Cut 2 pieces of fabric – 1 lining and 1 outer fabric with the dimensions 12″ x 17″. These dimensions are for a regular sized bottle of wine. If the bottle is bigger or smaller you will need to adjust the dimensions. 2. Fold the outer piece of fabric in half, matching up the long raw edges with right sides together.
How do you put a bottle in a bag?
Use ribbon for a fancier touch. Insert the bottle into the bag. Be careful when carrying the bag. It is better to hold it by the bottom, especially if you only used tape on the bottom of the bag. Cut 4 18 by 7-inch (46 by 18-cm) rectangles out of fabric.
What kind of fabric do you use to make a bag?
Any fabric will do – even upholstery fabric or denim. Have fun with the mixture of fabrics. Here we are using a 1/4″ seam allowance to create a generous sized bag. If your fabrics are smaller, then you can create a shorter bag. Just measure some wine bottles — to reach the neck of the bottle is typically about 10″.
How do you make a fabric wine carrier?
0:036:06Handmade Wine Carrier - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe're going to sew along the long edge with a quarter inch seam. We're using the patchwork foot onMoreWe're going to sew along the long edge with a quarter inch seam. We're using the patchwork foot on the Bernina. Machine you align the edges of your fabric.
How do you make a lined wine bag?
1:405:16How to sew a Bottle Bag - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you've made your outer bag make the line that in exactly the same way reverse your liner soMoreOnce you've made your outer bag make the line that in exactly the same way reverse your liner so it's tightly side outwards. Then place this within the other bag making sure the seam sides match.
What size is a wine bottle bag?
4" x 4" x 14"Our bag measures 4" x 4" x 14" to fit any standard sized wine bottle....MaterialPaperSize10 Count (Pack of 1)BrandPurple Q CraftsColorKraftPatternSolid2 more rows
How do you make a quilted wine bottle bag?
1:3333:35How to Make Quilt As You Go Wine Totes | a Shabby Fabrics TutorialYouTubeStart of suggested clipEnd of suggested clipYou can see you've got all three of your wine caddies here along with the basis are the circles. SoMoreYou can see you've got all three of your wine caddies here along with the basis are the circles. So we're just gonna rough cut this out a half-inch bigger than the tote then the caddy.
What are wine bags made of?
The bags are made out of #7 plastic, a catchall category typically containing mixed types of plastic (“polycarbonate”), combined for various practical reasons.
How do you make a fabric water bottle holder?
10:3927:36Sew a Water Bottle Holder: Detailed Instructions: Free Pattern - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd about a half an inch apart. This will allow the fabric on the bottom of the side piece to expandMoreAnd about a half an inch apart. This will allow the fabric on the bottom of the side piece to expand to fit around the larger curve of the circle.
How long is a wine bag?
Product informationProduct Dimensions6 x 5 x 15 inchesItem model numberABCDASINB0776M3YVHCustomer Reviews4.8 out of 5 stars 255 ratings 4.8 out of 5 starsBest Sellers Rank#18,943 in Industrial & Scientific (See Top 100 in Industrial & Scientific) #915 in Gift Wrap Bags3 more rows
How do you tie a bottle bag?
0:000:20You're using gift bags wrong!! #shorts - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis whole time you were using the gift bag wrong here's how to do it take each end and pull itMoreThis whole time you were using the gift bag wrong here's how to do it take each end and pull it through the opposite hole just like i'm showing. You it should start looking something like this.
How do you decorate a wine bottle for a gift?
Handmade Leather Tassel. Add some sophistication to your wine bottle with a simple handmade leather tassel. ... Custom Address Stamp. ... Mulled Wine Sachet. ... Personalized Luggage Tag. ... Furoshiki Wrap. ... Add a DIY Touch. ... Vintage Scarf. ... Faux Fur Cuff and Brooch.More items...
How do you make reusable wine bags?
How to make a wine bagStep 1: Cut out the fabric. Cut four pieces of fabric 18″ x 7″. ... Step 2: Sew fabric bags. ... Step 3: Stitch and trim corners to make bag shape. ... Step 4: Press top edges. ... Step 5: Pin and stitch channel for drawstring. ... Step 6: Sew top edge. ... Step 7: Insert the drawstring into the channel.
How do I make an insulated wine bag?
0:0413:35How to sew a padded wine bag - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe pieces you'll need a very easy you have two outer pieces two inner or lining pieces. And twoMoreThe pieces you'll need a very easy you have two outer pieces two inner or lining pieces. And two pieces that you'll use for the ribbon casing on the outside.
How do you make a wine bottle wrap?
2:263:46Easiest Ways to Wrap a Wine Bottle - YouTubeYouTubeStart of suggested clipEnd of suggested clipPaper around the bottle to cover the label. And tape the final edge of the wrapping paper to secure.MorePaper around the bottle to cover the label. And tape the final edge of the wrapping paper to secure. Take your ribbon. And tie a bow around the neck of the wine. Bottle.
How do I make an insulated wine bag?
0:0413:35How to sew a padded wine bag - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe pieces you'll need a very easy you have two outer pieces two inner or lining pieces. And twoMoreThe pieces you'll need a very easy you have two outer pieces two inner or lining pieces. And two pieces that you'll use for the ribbon casing on the outside.
How do you make reusable wine bags?
How to make a wine bagStep 1: Cut out the fabric. Cut four pieces of fabric 18″ x 7″. ... Step 2: Sew fabric bags. ... Step 3: Stitch and trim corners to make bag shape. ... Step 4: Press top edges. ... Step 5: Pin and stitch channel for drawstring. ... Step 6: Sew top edge. ... Step 7: Insert the drawstring into the channel.
How do you make a padded bag?
0:2617:41How to Make a Padded Gear Bag - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd stuff safe is this wonderful black bosal foam this is called inner foam. And it's a nice denseMoreAnd stuff safe is this wonderful black bosal foam this is called inner foam. And it's a nice dense little foam it's about 1/8 inch thick.
How do you make a wine bottle wrap?
2:263:46Easiest Ways to Wrap a Wine Bottle - YouTubeYouTubeStart of suggested clipEnd of suggested clipPaper around the bottle to cover the label. And tape the final edge of the wrapping paper to secure.MorePaper around the bottle to cover the label. And tape the final edge of the wrapping paper to secure. Take your ribbon. And tie a bow around the neck of the wine. Bottle.
How to put a lining on a bag?
Through the gap you have left, turn the bag out the right way, pulling the outer piece through and then the lining. Keep going until they are both are right sides facing out. Through the gap, carefully poke out the gusset corners and then push the lining inside the outer piece.
How to make a bottle bag flat?
This is to give the bottle bag a flat bottom. Start at one corner, pop your hand inside the bag and pull apart the 2 halves of the bag. Making sure that you pull the 2 layers apart completely, make a tri angle with the fabric . The top of the triangle being the corner of the bag and the bottom seam of the bag running down the centre of the triangle. ...
How to make a gusset lining?
2. Fold the outer piece of fabric in half, matching up the long raw edges with right sides together. Stitch along the bottom, pivot at the corner and along the long side. Leave the top opening unstitched. Repeat for the lining piece. 3. Stitch gusset corners at the 2 bottom corners.
How to make a wine bottle with sparkly dots?
Sparkly dots for the outer fabric and silver sparkly fabric for the lining. 1. Cut 2 pieces of fabric – 1 lining and 1 outer fabric with the dimensions 12″ x 17″. These dimensions are for a regular sized bottle of wine. If the bottle is bigger or smaller you will need to adjust the dimensions. 2.
How to match up a bag?
Tuck the raw edges of the gap section in on themselves so that you can then match up the top edges of the bag. You may find it useful to press the gap. Pin/clip in place over the gap section. It looks good if you can ever so slightly roll the lining part to the inside.
Can you use two different fabrics for a quilting bag?
Ideally it looks great if you can choose 2 different fabrics – one for the outer and one for the lining. In this example I used 2 fabrics that complement each other – the sparkly lining picks up the silver sparkly dots of the outer fabric. The advantage of this bag is that it could be used for a variety of different occasions. A quilting weight cotton works well for this project – it needs to have a bit of body to it so that it holds it’s shape (not too drapey).
How to make a wine bag from velvet?
And if you're making your wine bag from a velvet or napped fabric, to keep from. crushing the fabric's pile when you press it , try placing a terrycloth towel. underneath it (if you don't have a velvet board). Place the velvet fabric face down. on the towel and lightly press.
What is a wine bag?
And a wine bag is not only an adorable or elegant way to present a gift of wine to. your hostess, but a wine bag that's quilted can also serve as protection (and even. insulation) for your wine bottle as it's being transported. And if you give your wine. bag a handle, it becomes a convenient tote.
How to keep slippery fabric from shifting?
When cutting out your slippery fabric, try covering your cutting surface with a. cotton muslin or other textured fabric to help keep the fabric from shifting out of. place as you cut. And when sewing your slippery fabric, if you find one layer shifting.
Why do you sew a bottle bag?
The sewn bag not only transports the wine (or champagne) safely to the recipient, but also makes the gift more special. The best thing is that you can customise the bottle holder to your taste or to suit the occasion. (By the way, in my view, there’s no reason the recipient shouldn’t pass the bottle bag on to someone else. And why not? A hand-made present like this is far too good to store in a cupboard or (even worse) put in the bin.)
How to sew a bag with a clip?
Spread the excess material as evenly as possible around the whole circle. Now sew all the layers together using straight stitch. If you have an overlocker, you can finally overlock the edge; you can also use a normal zigzag stitch to do this. And that’s it!
How to sew a shell and lining?
Lay the shell and lining fabrics in front of you with the right sides together as shown in the image and sew along the arrows using straight stitch. Secure the ends of the seams. Trim down the seam allowances and do not forget to cut notches into the fabric perpendicular to the seam on the curves. This is important to ensure that the curves have a nice shape later on. (Make sure you don’t cut through the seam of course!)
What is the handle of a bag like?
The handle of the bag is like a hot dog in the middle of two halves of bread. Yes, I love analogies. Sew again along the line indicated by the arrow. If, like me, you want to add a decorative ribbon as well, this must be inserted BEFORE sewing this seam.
What is a bottle bag in the Bernina Advent Calendar?
I’m sorry, a what? You read it correctly – a bottle bag. Bascally, it is reusable gift wrapping for you to give as a present with a bottle of something nice inside.
How many fat quarters are there in a woven fabric?
Woven fabric with body (canvas, oilcloth etc.), two fat quarters, one for the outside and one for the lining
How to make a oly fun bag?
Unroll and unfold your Oly*Fun so that you have two layers of fabric on top of each other. 2. To create the bottom of the bag, take a wine bottle and set it on your fabric. Trace half of the shape of the bottle onto your fabric. Measure over 11 inches and trace half the bottle again. Connect the lines. 3.
How to make a circle out of a body piece?
Fold the body piece in half widthwise and pin the open end together. This should make your piece a circle. Then sew a row of stitches down the pinned side . 15. Turn the top, unsewn edge of the body piece down towards the wrong side of the fabric 1 inch and pin in place. Do this all the way around the top.
