- Gather the Tools You Need. Before we get started, you’ll first need to make sure you have everything you need to make your DIY yarn winder.
- Create the Toilet Roll Base. Take one of your toilet paper rolls, press it flat, and cut it at a diagonal 45-degree angle. ...
- Make a Stand. Take a strip of corrugated cardboard and cut it to a simple rectangular shape. It could be as large or small as you want.
- Make a Yarn Holder. Take the rolls you’ve made earlier and cover both holes with cardboard. ...
- Add the Wires. Take a wire and measure the distance between the cardboard’s base and halfway up the tube you’ve constructed.
- Assemble the Parts. Here’s the exciting part: assembly! We’re almost done. Push the tube straight through the hole you’ve made on the cardboard.
- Test It Out. Once you’ve finished the assembly, you’re basically done. But, of course, you need to make sure it’s working well!
- Make It Pretty! There’s no ‘right’ way to make your DIY yarn winder pretty. As long as you avoid covering the moving parts, anything goes!
Why do you need a yarn winder?
The 5 Reasons to Use a Ball Winder
- It is the best time saving hack for serious knitters and crocheters. ...
- Defects in the yarn can be detected. When you buy skeins from the store, you cannot see if there are any flaws since the yarn has already been wound ...
- Over time the yarn will maintain its elasticity. ...
- Organized storage. ...
- Access to both ends of the yarn. ...
What is the purpose of a yarn winder?
- Locate the end of the hank or skein that is on the outside; this is the end that will be attached to your ball winder.
- Slip that end of the yarn through the metal yarn guide to the slit above the yarn winder. ...
- Slowly and easily, crank the handle so that the yarn ball winder starts to spin the yarn into a well-organized cake.
How to use the winder by simplicity?
Simplicity Sidewinder Portable Bobbin Winder, White
- Make sure this fits by entering your model number.
- Includes bobbin winding machine, manual, and power cord.
- 120 voltage, and does not fit bobbins from Singer Centaur II, or Husqvarna Viking machines.
- A simple, easy way to transfer thread from a spool to a bobbin. ...
How to wind yarn without a ball Winder?
Wind a ball of yarn without a swift by holding the yarn in the outstretched arms of a volunteer or using the back of a chair. In addition to making winding easier, the swift unravels yarn from the skein by holding it under tension as it spins.
How do you wind yarn without a ball winder?
2:266:01How to Wind Yarn into Cakes without Yarn Winder, Knitcrate May 2020 ...YouTubeStart of suggested clipEnd of suggested clipNot a bowl. And how to totally Rebecca says that the cake actually need to be quite loose. But mineMoreNot a bowl. And how to totally Rebecca says that the cake actually need to be quite loose. But mine is somewhat dance. So when I will be winding this one I'll try to wide it a bit more loosely.
How do you make a yarn cone winder?
3:025:38making your own cones to fit yarn winders.wmv - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne is a little Dan and yogurt drink and one is a Kroger brand yogurt drink and one of those bottlesMoreOne is a little Dan and yogurt drink and one is a Kroger brand yogurt drink and one of those bottles fits each of these winders. Better. If you don't get a perfect fit you can easily pad your winder.
Do I really need a yarn winder?
Yarn ball winders are also a preemptive way of inspecting your yarn for knots or weak points so you can fix them before you start working (see the video below for a perfect example). Winding your yarn before use also prevents it from getting as tangled as it might if you were to pull directly from the skein.
How do you make a center pull ball of yarn?
1:316:59How to Wind a Center Pull Ball of Yarn (By Hand) | Knitting Hack TutorialYouTubeStart of suggested clipEnd of suggested clipThis end and then what I'm going to do is I'm going to hold down the tail and wrap the ball the yarnMoreThis end and then what I'm going to do is I'm going to hold down the tail and wrap the ball the yarn. Over it and as I wrap the yarn over I'm turning the needle.
How do you wind yarn on a toilet paper roll?
0:132:24Wind a Center Pull Ball of Yarn - YouTubeYouTubeStart of suggested clipEnd of suggested clipI'm just going to hold it in place with my finger. And just start wrapping your yarn. Give it aMoreI'm just going to hold it in place with my finger. And just start wrapping your yarn. Give it a couple of turns. Every so.
How do you make a yarn feeder?
0:472:39Loom Knit: Make Your Own Yarn Feeder | BEGINNER - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the challenge is for you is to find a pen that can actually do that. So this particular penMoreSo the challenge is for you is to find a pen that can actually do that. So this particular pen honestly i just took off the end pieces. And then i just fed my yarn through and voila i have a tool.
Should you roll your yarn into a ball?
If you are working with yarn in a hank like LB Collection Organic Wool, winding the yarn into a ball is the best way to prevent tangling as you work. After unfolding the hank, loop it around a swift (or chair back, or the hands of a willing friend) to keep it stable as you follow the steps below to wind it into a ball.
What's the point of winding yarn?
Yarn hanks need to be wound into cakes or balls before knitting or crocheting! A hank is a loop of yarn with two ends; if you knit directly from an opened hank, your yarn may become tangled. By winding a hank into a cake, you create a portable ball of yarn that is easy to work from and will not tangle.
Does winding yarn save space?
Wind your yarn into a Yarn Ball I've recently started doing this too… they take up less space and roll off easier whilst working knit or crochet. Also they look super cute. Not so great for direct shelf storage as they will roll off but if you keep your yarn in baskets like me it's a great space saver.
How do you make a pull ball?
2:375:07How to wind a center-pull ball of yarn with no tools - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo find a nice middle tension here. And start wrapping the yarn around. And around and around untilMoreSo find a nice middle tension here. And start wrapping the yarn around. And around and around until you start to form a ball. Sometimes it starts out as a little triangle as you can see.
How do you wind a hank of yarn without a swift?
5:349:01How to wind yarn without a swift | TeoMakes - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut your arms will get a bit tired. But just keep going. And once you have quite a bit on yourMoreBut your arms will get a bit tired. But just keep going. And once you have quite a bit on your fingers you want to take it and twist it and hold it like this and then we're just gonna keep winding.
How do you do a hand wind center pull?
0:091:51How to Wind a Center Pull Ball of Yarn by Hand - YouTubeYouTubeStart of suggested clipEnd of suggested clipAround you're just going to butterfly around a few times. And then pinch it at the center and pullMoreAround you're just going to butterfly around a few times. And then pinch it at the center and pull that butterfly off now you're going to leave your index finger in the center of the butterfly.
How to turn yarn into a winder?
Slip the yarn through one of the spirals of the yarn guide. Pull some yarn loose from the yarn swift. With your left hand, hold the yarn between the yarn guide and the yard swift and with your right hand hold the turner handle in the binder post and start cranking slowly. Work a few wraps of yarn around the Winder.
How to wind a skein of yarn?
Place the winder in the Spin Stabilizer. Place the skein to be wound over a yarn swift or have someone hold the yarn for you. Attach one end of the yarn to the top of the winder. Hold in place with a CD or cardboard circle with a hole in the center slipped over the top.
What are the parts of a roll ball winder?
PARTS OF A DUCT TAPE BALL WINDER (and what you will be using to build each part)#N#Winder (CD & Dowel, Oogoo cone)#N#Spin Stabilizer made in two separate steps. (Cardboard Tube, Oogoo, hollow tube/pencil, corrugated cardboard or foam core, padded double sided sticky tape, rubberband, marking pen) #N#Lazy Susan (Lazy Susan bearing, corrugated cardboard or foam core, double sided tape or Glue, marking pen .)#N#Turner (Jar, Cylinder, padded double sided sticky tape, Jar cap. long rubberband, contact cement)#N#Bottom Base (I didn't label it in the photo but it is the part at the very bottom that the Turner and Lazy Susan are taped to.
How to make a hole in a pencil?
The hole should be big enough to fit whatever you are using for #8 (hollow tube or pencil) on the Supply List. Push the hollow tube or pencil through the hole. Angle it so one end is even with the cut opening of the tube. Using duct tape, securely seal the Top opening.
Step 2: Cutting & Reinforcing the Cardboard Tubes
You first need to take 1 toilet roll and cut it diagonally at a 45 degree angle (whilst the roll is pressed flat).
Step 3: Cut Out the Base
Cut 3 shapes out of corrugated cardboard; 1 being the main rectangle shape, and the other 2 being the same sized rectangle shape but with an extra section on one of the long sides (see photo).
Step 4: Assembling the Yarn Holder
Next, add tops and bases to each card tube, as shown. I just cut these circles out of cereal box card so that they were very slightly larger than the tube diameters, then superglued them in place. Leave to dry.
Step 5: Add the Wire Guide
Measure the distance between the square of corrugated cardboard you just glued onto your card tube, and halfway up the 'yarn holder' tube. This is how high above the cardboard base you want the coil of wire to sit. In my case this was 9 cm (3.5").
Step 7: Test Run
Before doing any decorating (if you want to), it's time to give it a test run!
Step 8: Decorating
I wanted to hide some of the cardboard to make it prettier, so I used PVA glue and the decoupage technique to add pieces of book page to the yarn winder.
Step 9: Final Test
Once it's all completed, it's time to take it for a proper test run, and as you can see I ended up with a centre-pull ball of yarn.
How to attach a ball winder to a counter?
Square edges are best. To avoid damage to your counter/table, you may want to place a piece of cloth between the ball winder and the counter.
How to pull yarn from the center?
If you want a center-pull, hold the end of the yarn coming from the middle with one hand, and gently ease off the ball. If you want an outer-pull, put your thumb on top of the yarn coming from the center, and gently ease off the ball. Put your winder away.
What happens if you go too fast on yarn?
If you go too fast, the yarn may get caught in the gears below (on some models.) After you have wound all the yarn, you should decide if you want a center-pull ball or an outside-pull ball. If you want a center-pull, hold the end of the yarn coming from the middle with one hand, and gently ease off the ball.
Can you use a ball winder at a yarn store?
If you are still unsure of how to use a ball winder, your local yarn store will most likely be able to show you . It would be a good idea to bring your yarn winder, as the stores' may be different than yours. Thanks! If you wind a lot of yarn, you may want to buy a nice winder.
Can you store yarn in a hank?
I don't see why not. Yarn comes in hanks, balls, or skeins, which are all wound in some way or another. It's an excellent way to store your yarn - it's much easier to store uniformly sized skeins or balls, and it makes it easy to tell at-a-glance what you have.
Is it better to wind yarn right away or right away?
It's all about your personal preference, but there's no harm in winding it right away. It's better to do it when you're excited about a new "toy" than when you're just about to start a project! Winding now will also help you spot imperfections or issues with the yarn before you get into a project.
