DIY Decorative Yarn Balls
- Step 1: Materials Needed To make these yarn balls you will need: Yarn, White glue Round balloon, Scissor, Flat tray, Paint brush. ...
- Step 2: Glue the Yarn Take a flat tray (at least 1 inch height), Mix white glue and water (50:50) very well on the tray. ...
- Step 3: Wrapping the Yarn Blow up a small round shaped balloon. ...
- Step 4: Popping the Balloon ...
- Blow up balloons to different sizes (filling balloons only halfway will help you achieve a more spherical shape) and knot each balloon.
- Create a drying area. ...
- Hang balloons from strings above the drying area.
- Spray balloons with cooking spray; this will make it easier to remove the yarn later.
How to create a yarn ball?
- Cut twine to 72″
- Thread large-eyed needle by folding over twine on itself and flattening.
- Use a pliers to push threaded needle through yarn ball; it will save your fingers.
- At first yarn ball, make a knot to create a loop to hang. You’ll do this at the end also.
- To pull needle through yarn balls, use the pliers again.
- Vary 1-3″ yarn balls on twine. ...
How do you make yarn balls?
What you will Need:
- How to Make DIY Yarn Balls Blow up balloons to different sizes and knot each balloon.Spry them with cooking spray. ...
- How to Make DIY Yarn Balls Place the Mod Podge into the bowl.
- How to Make DIY Yarn Balls Dip the yarn into the Mod Podge and gently squeeze out the excess. ...
How to make dryer balls with yarn?
Steps For Making Wool Dryer Balls
- Begin wrapping your wool yarn around your first two fingers about 10 times.
- Pinch the bundle of yarn in the middle and pull off your fingers. Wrap more yarn around the middle of this bundle.
- Wrap yarn around the entire bundle until you have the beginnings of a ball.
- Continue wrapping tightly until your ball is the desired size. ...
How to change balls of yarn?
Starting a New Ball in the Middle
- When you see that you're getting pretty close to the end of your first ball, pick up the yarn from the second ball.
- Overlap the two threads so that the tails are going in opposite directions.
- Knit three or four stitches with both yarns held together, leaving a tail of a few inches on each ball.
What kind of glue do you use to make twine balls?
DIY Twine BallsTwine or jute.Wood glue ( I'm using gorilla wood glue)Rubber gloves.Balloon.Bowl.
How are yarn balls made?
2:328:54How Yarn is Prepared & Packaged | The Crochet Crowd - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe machine lays down the yarn in a circular formation onto the conveyor. The machine is time toMoreThe machine lays down the yarn in a circular formation onto the conveyor. The machine is time to stop and start based on the winding. Process on the other side of the line.
How do you make yarn orbs?
2:185:34Gorgeous DIY Yarn Orbs! - Do It, Gurl - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can dip portions of yarn into the glue squeeze. Out any excess and wrap it around your balloon.MoreYou can dip portions of yarn into the glue squeeze. Out any excess and wrap it around your balloon. Or you can place your yarn onto the balloon.
How do you make Modge podge yarn balls?
0:343:42DIY Yarn Christmas Ball Modge Podge - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe're going to be dipping. This yarn into a slightly watered down modge podge or you can use glue ifMoreWe're going to be dipping. This yarn into a slightly watered down modge podge or you can use glue if you don't want to use much pod I'm going to be running my yarn through the Mod Podge.
How do you make fluffy yarn balls?
1:588:50How to Make a PERFECT POM POM Every Time - YouTubeYouTubeStart of suggested clipEnd of suggested clipAlright. Now it's kind of anchored in place and I'm gonna wrap my entire donut with yarn. So I'm notMoreAlright. Now it's kind of anchored in place and I'm gonna wrap my entire donut with yarn. So I'm not pulling real tight when I'm wrapping I'm just kind of neutral. Okay so not tight not loose.
How do you make a ball of yarn from a skein of yarn?
Snip the yarn that is holding the skein together, and finding an end, wrap the yarn around your hand a few dozen times. Slip the yarn off your hand, keeping it neatly contained. Now firmly holding the beginning of the ball, wind the yarn perpendicular to the first wraps.
How do you make a yarn ornament?
0:252:40How to make Yarn Ornaments DIY String Ornaments - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhite yarn some glitter a bowl and i've got about two teaspoons of water in there. And some tackyMoreWhite yarn some glitter a bowl and i've got about two teaspoons of water in there. And some tacky glue that will be mixing in with the water.
How do you make a simple ball of yarn?
0:111:16How to roll yarn into a ball - YouTubeYouTubeStart of suggested clipEnd of suggested clipPiece as the foundation for rolling. Then continue to roll the end around that mass and just squishMorePiece as the foundation for rolling. Then continue to roll the end around that mass and just squish those ends in there and you'll see how that comes together go ahead and squish them and roll.
Is it better to roll your yarn into a ball?
You should unquestionably wind your yarn into a ball or cake before using it. Otherwise it will invariably become tangled, even if you stay in one spot to knit the whole project.
Does Modge podge work on yarn?
Then we began wrapping the yarn around the cone, applying Mod Podge with a paint brush to get the yarn to stay in place. We continued wrapping the yarn around until a very nice, thick base for our Christmas tree was formed. The entire time, we used the brush to apply a very liberal coat of Mod Podge to the yarn.
How do you turn a skein into a ball?
2:265:17Knitting 101: How to Wind Yarn Into a Ball - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you take the end and hold it in your hand. Like that and then you start winding it around yourMoreSo you take the end and hold it in your hand. Like that and then you start winding it around your thumb you're not winding tight it's loose. And you unwind it from the Hank and wind.
What is a magic yarn ball?
A Magic Ball in knitting/crochet is a ball or cake of yarn that is actually made up of several smaller skeins (usually leftovers, mini-skeins or samples). These yarns can be high-contrast, low-contrast, matchy-matchy, completely random, whatever your heart desires!
How are pom pom balls made?
InstructionsMake Cardboard Pom-Pom Templates. ... Cut Out the Circles. ... Start Wrapping Yarn Around the Template. ... Wrap the Yarn Until the Ring Is Full. ... Cut Around the Edge of the Ring. ... Tie the Cut Yarn Pieces Together. ... Shape the Pom-Pom. ... Fluff the Pom-Pom and Finish Trimming.
How do you make string balls?
InstructionsCut String. Gather string and cut into 24″-36 lengths. ... Blow up balloons. Blow up balloons and have them ready at your work area.Mix your paste. Combine 1 cup flour with 1 cup water in a bowl. ... Coat a balloon. ... Coat the string & wrap balloon. ... Repeat. ... Let Dry. ... Popping time!More items...•
How is yarn made step by step?
0:219:49How Yarn is Made | The Crochet Crowd - YouTubeYouTubeStart of suggested clipEnd of suggested clipEach one of these bundles is fed into a machine and blending them all together you see your yarnMoreEach one of these bundles is fed into a machine and blending them all together you see your yarn strands in a ball can be made up of all of these bundles by the time it goes through spinning.
What materials are used for yarn bombing?
Yarn bombing (or yarnbombing) is a type of graffiti or street art that employs colourful displays of knitted or crocheted yarn or fibre rather than paint or chalk. It is also called wool bombing, yarn storming, guerrilla knitting, kniffiti, urban knitting, or graffiti knitting.
Materials
Balloons Plastic bags or a dropcloth to cover the floor Cooking spray White glue ½ cup cornstarch ¼ cup hot water Scissors Yarn Mixing bowl
Instructions
Blow up balloons to different sizes (filling balloons only halfway will help you achieve a more spherical shape) and knot each balloon
Décor Tips
Because you can use any color yarn for this project, yarn ball decorations are suitable for almost any occasion
Classic DIY Glue Yarn Ball
This simple project might bring back memories of elementary school, but it turns out to be not only a fun craft to do with the kids, but a darling spring time decoration. A decorative glue yarn ball like this can cost at least a few dollars each in the store. But if you make them yourself, you can make a ton of them for just a few bucks!
Step 3
Pull out a big bunch of yarn from the yarn ball itself. It is helpful to wrap it around your hand holding onto the end as to avoid tangling of the yarn (I learned this one the hard way – what a mess!) Dunk the yarn into the glue/water mixture making it all wet. Squeeze it out before wrapping.
Step 4
Begin wrapping the wet yarn around the small balloon. There is no method here, just wrap it in every which way.
Step 5
Once you have covered up a good majority of the balloon, cut off the yarn and tuck the end under.
Step 6
Roll the yarn wrapped balloon one more time in the water glue mixture, and then squeeze out any excess.
Step 7
Once all your glue yarn ball is completely squeezed out, let them dry with the balloons inflated inside overnight. This is an important step.
Step 8
In the morning of the next day, the glue yarn ball should be stiff and hard. If it is still damp, I would give it a second day. If it’s dry, you can pop the balloon! You should be left with a colorful decorative yarn ball.
Step 1: Prepare the glue
Take a good measure of glue (perhaps a table spoon) and mix it with approximately the same amount of water. Add the water a little at a time and mix. You do not want your glue to be too watery or your balls will not be very stiff when they dry.
Step 2: Cut and soak yarn
Cut a length of yarn. Now this is a bit of guesswork. Remember that you can always trim the yarn later if it is a little too long but that will be messy as it will be covered in glue. It also depends on the size of your balloon so just make an educated guess.
Step 3: Wrap the yarn around the balloon
Inflate your balloon to the size that you want your ball to be. It is important to use the correct size balloon as just inflating a large balloon a little bit is not very successful.
Step 4: Drying your yarn ball
You simply need to dry the ball so that it hardens. I recommend drying the ball as quickly as possible. Sometimes your balloon may deflate before your yarn ball is hard! I stood mine on some aluminium foil on a radiator but if it is summer you could dry them in the sunshine. It may take several days to be fully dry.
