how do you make stepping stones with flour

How do you make stepping stones?

To make stepping stones, choose a mold, like a cake pan or a plastic tub, then coat the mold with petroleum jelly or cooking oil to make removing the stone easier. Prepare concrete according to the instructions on the package, then pour around 2 inches into the mold.

Do you need a step stone kit to make step stones?

While you do have the option of purchasing a kit, you can save a lot of money by picking up your own supplies. In fact, you can make a whole set of DIY stepping stones for the cost of a single kit. Basically, stepping stones are made by mixing concrete, decorating it, pouring it into a mold, and allowing it to dry.

How do you turn a leaf into a stepping stone?

Use a heavier concrete with more gravel for a strong, sturdy stepping stone that will get lots of foot traffic. Pile the concrete onto the front of the leaf. Place the leaf down onto a large, plastic sheet. Use a trowel to scoop the concrete onto the leaf.

How do you make a stepping stone out of chicken wire?

Press some chicken wire into the concrete. Cut a scrap of chicken wire until it is 1 inch (2.5 cm) smaller than your mold. Set it into your mold and gently press it into the wet concrete. This step is not absolutely necessary, but it will help prevent the stepping stone from cracking later on.

How do you make homemade stepping stones?

1:194:34How to Make Concrete Stepping Stones /// Kids Projects for Mom (3 ...YouTubeStart of suggested clipEnd of suggested clipAny molded plastic will work great too and it doesn't have to be circular. But if you want theMoreAny molded plastic will work great too and it doesn't have to be circular. But if you want the perfect stepping stone mold. You got to be willing to make some hard choices.

What material do you use to make stepping stones?

MaterialsQuick-setting concrete or "stepping stone" concrete.Nonstick spray or petroleum jelly.Embellishments such as broken bits of pottery, marbles, small toys, tiles or dice from board games, dried flowers or plant matter, sea glass, sparkles, etc.

How do you make clear stepping stones?

1:306:14How to make Sea Glass Stepping Stones - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first step in this project is preparing the sea glass glass is transparent that means it picksMoreThe first step in this project is preparing the sea glass glass is transparent that means it picks up the color that's behind it. So we need to spray paint the backsides.

How do I make a backyard stepping stone?

1:347:03DIY Stepping Stones- Beautiful...Easy...& Cheap! - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe stones I made with the cake pan lids I used random leaves from my garden to make an impressionMoreThe stones I made with the cake pan lids I used random leaves from my garden to make an impression in the cement. I found it helpful to just for a few minutes kind of flatten the leaves with. Books.

Is it cheaper to make your own stepping stones?

The quick answer is that usually it is cheaper when making your own stepping stones. It will save you the most money, but this may not be the best option.

How do you make stepping stones for kids?

0:295:24Looking For A Project To Do With Your Kids? Fun DIY Stepping Stones!YouTubeStart of suggested clipEnd of suggested clipYou will need plaster of Paris or cement. And of course water marbles gems or tiles for making yourMoreYou will need plaster of Paris or cement. And of course water marbles gems or tiles for making your design a cake pan or other mold for molding the stepping stone.

How do you make stepping stones with flour and salt water?

The Recipe:Mix salt, flour and water into medium sized mixing bowl with a wooden spoon.Knead until dough forms.Form your stone.Make impression.Bake at 200 F for 3 hours.

What can I use as a mold for stepping stones?

Easy Molds for Stepping StonesPlastic plant pot saucers. If you're a gardener, you may already have a collection of plastic saucers that hold large garden pots or indoor planters. ... Old cake or pie pans. ... Plastic ice cream buckets. ... Five-gallon utility pails. ... Leftover pizza boxes. ... Scrap lumber and plywood.

How do you make a white concrete stepping stone?

0:0012:33How To Make White Concrete | A Modern Builds Experiment - YouTubeYouTubeStart of suggested clipEnd of suggested clipBasic concrete is made up of three simple ingredients sand cement. And an aggregate like stones orMoreBasic concrete is made up of three simple ingredients sand cement. And an aggregate like stones or gravel whenever you buy a bag of concrete mix like quikrete.

How do you seal DIY stepping stones?

0:471:42How to Seal Stepping Stones - YouTubeYouTubeStart of suggested clipEnd of suggested clipThings you'll need concrete sealer newspaper soft paintbrush place the stepping stone on theMoreThings you'll need concrete sealer newspaper soft paintbrush place the stepping stone on the newspaper. Apply the concrete sealer over the entire top surface of the stepping stone with a paintbrush.

How thick should stepping stones be?

1 1/2 inches thickGo to your local stone yard and look for pieces at least 1 1/2 inches thick and about 24 inches wide. Pieces that size aren't likely to crack, and no cutting is required; you simply adjust their spacing to fit a natural stride and to make the path curved or straight.

What kind of cement is used for stepping stones?

A good general-purpose sand-mix concrete is probably the best choice. An 80-pound bag should be enough to cast 5 to 6 stones, depending on their size. The texture is fine enough to allow you to embed decorative glass or pebbles, and it can easily accept imprints.

What kind of cement do you use to make stepping stones?

A good general-purpose sand-mix concrete is probably the best choice. An 80-pound bag should be enough to cast 5 to 6 stones, depending on their size. The texture is fine enough to allow you to embed decorative glass or pebbles, and it can easily accept imprints.

What can I use for stepping stone molds?

Metal cake or pie pans, coated with cooking spray or oil, or lined with plastic wrap, can be perfect molds for shaping concrete into stepping stones. Some users report that sprinkling sand on the bottom of the pans before pouring concrete helps the dried stone pop out of the mold. Plastic ice cream buckets.

How thick should stepping stones be?

1 1/2 inches thickGo to your local stone yard and look for pieces at least 1 1/2 inches thick and about 24 inches wide. Pieces that size aren't likely to crack, and no cutting is required; you simply adjust their spacing to fit a natural stride and to make the path curved or straight.

How do you make quikrete for stepping stones?

2:025:04How to Make Garden Stepping Stones With Quikrete - YouTubeYouTubeStart of suggested clipEnd of suggested clipAs you work using a large metal spoon add more water and stir until the mixture reaches a MudpieMoreAs you work using a large metal spoon add more water and stir until the mixture reaches a Mudpie consistency. Step 3 pour the wet quick reet into the mold forms a little at a time allowing.

How to remove a stepping stone from a mold?

Coat the inside of your mold with petroleum jelly or nonstick cooking spray. This will make it easier to remove the stepping stone from the mold. If you are using a cardboard mold, cover the inside of the mold with a plastic sheet (ie: plastic wrap or a plastic bag) first.

How to make a stepping stone out of chicken wire?

Cut a scrap of chicken wire until it is 1 inch (2.5 cm) smaller than your mold. Set it into your mold and gently press it into the wet concrete. This step is not absolutely necessary, but it will help prevent the stepping stone from cracking later on.

How thick should a stepping stone be?

You can also find special molds for making stepping stones in an arts and crafts store. The mold needs to be at least 2 inches (5.1 cm) thick. If the edges of your mold are not rigid, then you will need to use something to reinforce them until the concrete hardens. This usually takes about 24 hours.

How to get concrete out of your eyes?

Avoid getting dry or wet concrete in your eyes. If you do get concrete in your eyes, flush them out with generous amounts of cool water immediately . If needed, go to urgent care, an emergency room, or to see an optometrist. ...

How to keep concrete from getting into your lungs?

It's not something you want getting into your lungs either. Put on a pair of safety goggles, a dust mask, and work gloves. Make sure to keep your workspace, tools, and mixing equipment tidy and avoid getting concrete on yourself as well.

How big should a pumpkin leaf be?

The leaf needs to be at least 10 inches (25 cm) to 12 inches (30 cm) across, otherwise it will be too small to use as a stepping stone. Great leaves include gunnera, hosta, and rhubarb. Make sure that the leaf does not have any holes or tears. Some cucumber, squash, and pumpkin leaves may also be big enough.

Who owns Artscape Gardens?

This article was co-authored by Benjamin Hansen. Benjamin Hansen is a Landscape Contractor and the Owner of Artscape Gardens, a boutique landscaping company in Los Angeles, California.

How to protect mold from concrete?

To protect the mold, place it on a plywood base board to move it around during and after the pour. Lifting the mold from the plastic rim when it's filled with concrete will cause stress and eventually the plastic mold will develop cracks. (A well cared-for mold will last a minimum of 20+ castings).

How to get mold out of stone?

Soak up the excess with a paper towel. Too much mold release will make air bubbles in the surface. Not using mold release can make the stones more difficult to de-mold, and you'll need to be more careful about damaging the mold. Now place the mold on a plywood base board for the remaining steps.

How long does it take for mold to cure on concrete?

After the mold is full, it needs some time to cure. Place on a level tabletop. Cover with painter's plastic and wait 4 days to cure. The plastic covering the concrete will help keep the humidity inside, like a greenhouse, and this will minimize surface cracking.

How high should a stepping stone slump be?

The ideal slump should be about half the height of a 15 oz. plastic cup. After you've found a workable mix, it's time to fill the stepping stone mold. Tip: In cold weather, use warm water to accelerate the set time. In hot weather, use cold water to slow the set. Ask Question.

What is a water fed concrete polisher?

A water fed polisher is a highly useful, moderately-priced professional tool, essential if you're working with concrete on a regular basis. Dry polishers are also available and when hooked up to a HEPA vacuum, they eliminate the caustic dust that comes with grinding concrete. Ask Question.

How to test concrete mix for workability?

A simple method of checking the workability of the mix is to perform a slump test. The slump is the vertical distance the concrete settles. Poke a 1/4" hole in the bottom of a plastic cup with a pen. Fill the cup with the freshly mixed concrete and pack it in. Place the filled cup upside down on a flat, rigid surface.

What equipment do you need to mix concrete?

When mixing concrete, always wear proper safety equipment (rubber gloves and a particle mask). Mixing can be done with a proper concrete mixer, in a wheel barrow with a concrete hoe, or by hand with a trowel in a 5-gallon bucket.

How to decorate stepping stones?

1. Go to local store and purchase concrete mix. Also purchase some decorations such as seashells, river stones, beads, sea glass, marbles, and other little things to decorate your stepping stones with. ...

How many people edit wikihow?

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 13 people, some anonymous, worked to edit and improve it over time. This article has been viewed 48,029 times.

What is a stepping stone?

A stepping stone is a very pretty decoration made of concrete. It looks great on front steps, and is fun to make. Here's how!

How to change the color of cement?

Put about two cups of the mix in an aluminum pan and add one cup of water. You can also add dye to change the color of the cement at a local hardware store. ...

1. DIY Garden Stepping Stones

Update your garden decors with these colorful stepping stones, which will also bring the necessary colors to your garden. What will make you easily get these garden decors is the easy construction.

2. Make a Slate Concrete Stepping Stone

Due to the involved creativity, everyone will adore this garden stepping stones project. Yes, it involves creating natural-looking stepping stones using concrete. And then have been added to the garden ground to create a beautiful pathway that is amazingly cute and beautiful to look at.

3. Handprint Garden Stepping Stone

Make your garden look pretty and exciting with these handprint stepping stones having a shape like a leaf. Mention the name, year and other details and the handprint to create a significant memory in the garden in the form of this accent stepping stone.

4. Personalized Stepping Stone

Give your green space a glam personal touch by adding these walking stones. They will be like creating great memories in your garden and will get ready at cheaper cost prices also. These are here, and the personalized stained glass stepping stones will never get out of style.

5. Making Stepping Stones for Kids

Are you deeply interested in decorating your front and backyard? Then time to do it by adding some decorative stepping stones. The project involves making the round stepping stones using quick-drying concrete, and you can decorate them using lots of materials like stones, mosaic pieces, plastic figurines, etc.

6. Painted Stepping Stones with Stencils

This project will help you decorate the stones you already have. So, they will look enchanting again and will add to the beauty of your garden. Here you are to use the custom decorative stencils for stepping stone painting to create a fetching appeal of boring and dull-looking garden stones.

7. DIY Footprint Stepping Stones

Feel free to clone these adorable footprint stepping stones, and they will surely make a great memory. These are the simple 10″ stepping stones that come with name letters just above the footprints. You can mix custom colors in the concrete or paint these stepping stones to add charming decors to your garden space.

What is a kid friendly stepping stone?

Skill Level: Kid-friendly. Homemade stepping stones on a walkway or path are a great way to personalize your garden. Not only are they interesting hardscape elements to have around the garden, but they also make great gifts and keepsakes for family and friends. Make one of these stepping stones and use a child's handprints or footprints ...

How to make stepping stones for kids?

Prepare Crafting Area and Molds. Start by putting newspaper and/or a drop cloth on the ground. Ideally, you'll make your stepping stones outdoors because it can get messy. Line your mold or molds with cooking spray or petroleum jelly.

Who is Sherri Osborn?

Sherri Osborn is a freelance writer and author of several books on crafting. She has more than 15 years of experience writing about crafts. Homemade stepping stones on a walkway or path are a great way to personalize your garden. Not only are they interesting hardscape elements to have around the garden, but they also make great gifts ...