- Calculate square footage of ceiling and order appropriate amount.
- Start with nailing a row of planks until you can no longer fit a full plank, inserting the lips of each board together as you go.
- Start the next row using a shorter board than you started the last row with.
- Insert the tongue of the board into the groove of the board already nailed in, then nail into place. ...
- Continue, then go back and add custom length pieces to fit the gaps at the end of your previous rows, then continue with a new row.
- Add molding on the wall to cover the edges for a finished look.
How do you nail tongue and groove paneling?
Blind nailing is another method used for tongue and groove paneling. The nail is typically driven into the board at a 45-degree angle at the tongue. This method hides the nails, so there is no need to cover them to hide the nail head. When installing this nail, you can use a hammer or a nailer to shoot the nail in.
How do you install tongue and groove flooring?
During installation, the ridge side of one board is fitted into the groove side of an adjacent board, creating a snug seam. The short width sides of tongue and groove flooring planks also feature either a ridge or a groove, which creates a fully interconnecting floor when installed.
How do you nail tongue and groove wood to the ceiling?
When you have the ceiling prepared for the first piece of tongue and groove wood, nail it to the ceiling by putting nails diagonally through the tongue and into the ceiling. Use a pneumatic nailer for this process to allow you to put the nails in place quickly and with ease.
Do you need to nail tongue and groove?
Although tongue and groove installation is very secure, you still want to nail them in place to minimize any movement, especially as the board expands and shrinks over time. What is Tongue and Groove? Brad Nails v. Finish Nails in Tongue and Groove Pine Face Nail v. Blind Nail for Tongue and Groove What is Tongue and Groove?
How do you attach tongue and groove?
4:1215:40How to Install Tongue and Groove Ceiling Boards - WindsorONEYouTubeStart of suggested clipEnd of suggested clipExample i'll shoot this nail. Into this piece of sheathing blind nail pattern when i put the grooveMoreExample i'll shoot this nail. Into this piece of sheathing blind nail pattern when i put the groove over the tongue you won't be able to see the nail. So i'll just shoot this. In like that.
How do you fasten tongue and groove pine boards?
Fasten each board using a 2” 15 gauge nail on each joist. On the cut side, nail it 1/2” from the edge to prevent splitting the wood. On the tongue side, nail it through the tongue at an angle so the next row covers the nail.
How do you install tongue and groove planks?
0:032:32How to install Tongue and Groove Panelling - YouTubeYouTubeStart of suggested clipEnd of suggested clipThese are the tools you'll need for the job firstly decide how high up your wall you want yourMoreThese are the tools you'll need for the job firstly decide how high up your wall you want your paneling to go measure this vertical height and mark it on the wall.
Does tongue and groove need nails?
Although tongue and groove solid hardwood flooring does fit together, it must still be nailed to a subfloor (note that tongue and groove subflooring is one of the many types of subflooring out there).
What kind of nails do you use for tongue and groove?
Drive the nails through the shoulder of the tongues into the framing at about a 45-degree angle. The next grooved edge will hide the nail holes. A 15- or 16-gauge brad nailer with 2-in. nails is the best choice for fastening, although an 18-gauge nailer will do the job, too.
Where do you nail tongue and groove flooring?
7:5710:07How To Install Tongue and Groove Flooring | Ask This Old HouseYouTubeStart of suggested clipEnd of suggested clipWe're going to use our stapler right here so at this point we are far enough away from the wall thatMoreWe're going to use our stapler right here so at this point we are far enough away from the wall that the big nailer stapler can come in right there now this will sit right here on the floor.
Should you glue tongue-and-groove?
Don't Glue Tongue and Grooves This is because wood flooring needs room to move as it expands. If the wood is glued both to the subfloor and between the planks, there's no room for movement. In the long-run, limited movement leads to cracks, disfigurement and warping of your wood flooring.
Do you start tongue-and-groove from the top or bottom?
Start at one bottom corner of your wall and make sure that your first board is level by using a hand level or a laser level. The tongue of the board should be facing up towards the ceiling while the groove faces down towards the floor.
Which side of tongue-and-groove faces out?
The smooth side should be fitted so it faces outward. Check your planks before you install them. Make sure the rough side is against the wall, ceiling, or floor. This will give a more professional finish.
Can you use a brad nailer for tongue and groove flooring?
The answer is yes, you can use a Brad nailer to install or replace hardwood floor panels in your home or office.
What do you put under tongue and groove flooring?
The underlayment can also protect against water damage. If you're installing your tongue and groove flooring onto a concrete floor, an underlayment is necessary to prevent moisture from accumulating between the concrete and the flooring.
Should I use staples or nails for hardwood flooring?
A staple will give a stronger, less-forgiving hold because of its two-pronged construction. Nails allow for a more natural expansion and contraction of the hardwood floorboards with fewer problems.
How do you nail tongue and groove pine?
4:027:14How to install Tongue and Groove Pine on the Ceiling - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow the tongue of the next one will hold the bottom and this nail will hold it in the top. So that'sMoreNow the tongue of the next one will hold the bottom and this nail will hold it in the top. So that's a nice way to do it if you want to see the nail.
Should tongue and groove be glued?
The recommended glue for floating installation is Tongue and Groove engineered flooring glue. Glue placement is very important. The glue must be placed along the topside of the groove the full length of the grooved side and end.
How do you nail knotty pine?
1:336:01How To Install Knotty Pine - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhen you get to the ends like if you see over there. You got a nail on the ends. But then you justMoreWhen you get to the ends like if you see over there. You got a nail on the ends. But then you just put trim in after you're finished with that part of it so you are going to have some holes.
What angle do you nail tongue and groove?
Blind nailing is another method used for tongue and groove paneling. The nail is typically driven into the board at a 45-degree angle at the tongue. This method hides the nails, so there is no need to cover them to hide the nail head.
How do tongue and groove pine boards fit together?
Tongue and groove pine wood fit together using an interlocking technique in which one edge of a pine board resembles a tongue , and the other edge is an opening for the tongue to be held in place, known as a groove. This is a very secure way of fitting wood together to install floors, ceilings, or walls. However, despite how secure this type of wood is, it will still need nails to keep it into place for a much more firm fit.
What is Tongue and Groove?
Many centuries ago in colonial America, dirt floors were the only type of floor that most houses had. Though it was a common type of flooring, it was not ideal for many reasons. For one, the free-flowing dust throughout the air caused all kinds of air quality issues. In addition, the wetness of the soil could also cause mold and mildew issues within the home. Both the bad air quality and the moisture issues presented health problems.
How to drive a pine nail?
Then it is a good idea to finish driving the nail using a scrap piece of wood or a nail set. This is because pine is a very soft hardwood, and if you miss the nail and accidentally hit it with a hammer, this can damage the wood by leaving a hammer imprint. The best way to minimize inadvertently hitting the wood with a hammer is to use a scrap piece of wood that surrounds the nail as you are pounding. This will allow you to hit the scrap wood instead of the tongue and groove pine. Another method is to use a nail set. It will enable you to drive the nail in by hitting this tool instead of the nail itself, giving you more room for error.
How to secure tongue and groove pine?
To ensure that your tongue and groove pine are correctly installed and secure, you will have to make sure that you choose the job’s proper nails and nail technique. Although tongue and groove installation is very secure, you still want to nail them in place to minimize any movement, especially as the board expands and shrinks over time.
What type of nail is used for tongue and groove paneling?
The two most common types of nails used for tongue and groove paneling projects are the brad nail or the finish nail. Brad nails are made of 18-gauge steel wire and because they are very thin nails, it makes them perfect for use with delicate material such as pine wood. In addition, they are great for tongue and groove paneling because it is easy to mask them in the wood.
How to drive nails through wood?
Face nailing is the most common way to drive a nail through the wood. This technique involves driving the nail perpendicular to the board. It is one of the more traditional methods of inserting nails into boards. When employing this method, the nail head is visible and may be covered up with caulk or putty to keep it from showing.
How to nail a floorboard at 45 degrees?
The process involves driving a series of nails into the tongue of a floorboard at 45-degree angles; the angle allows each nail to push the board against the one next to it as well as hold the board to the floor. Each nail is fully set when the head is flush with the tongue, and because it's angled, it doesn't interfere with the groove ...
When do you need a nail set for flooring?
Setting Nail Heads. You'll need a nail set when hand-nailing flooring, and you should use it when the head is about 1/2 inch out. If you try to nail any deeper than that without a nail set, you'll probably hit the surface of the board, and you could chip it.
Why do you need to predrill nails?
The Importance of Predrilling. A power nailer develops enough force to drive nails through the tongue at the proper angle without splitting the wood, but when you're driving the nails with a hammer, you can't develop that force, and the angle isn't automatic. These are two good reasons to predrill the holes for the nails you drive.
When is each nail fully set?
Each nail is fully set when the head is flush with the tongue, and because it's angled, it doesn't interfere with the groove of the following board as it fits around the tongue and hides all the nails on that tongue.
Can you nail a drawing board together?
Drawing Boards Together. When you're hand-nailing a floor, you can't take advantage of the impact that the nailer exerts on the flooring to drive the boards together, and you may need to compensate.
Can you use a power nailer to nail tongue and groove?
Whatever you call it, it's much easier to do with a power nailer than it is to do by hand for more than one reason. If you don't have a power nailer, you'd ...
How does tongue and groove work?
Here’s how it works: One side of a tongue and groove board has a protruding ridge (the tongue) that runs the entire length of the board, while the other side of the board has a groove from end to end. During installation, the ridge side of one board is fitted into the groove side of an adjacent board, creating a snug seam.
Why is tongue and groove flooring used?
Nearly all hardwood flooring today is tongue and groove because it solves the pesky problems—such as shrinking, warping, and working loose—commonly experienced by face-nailing planks to floor joists. Because the boards interlock, they’re less likely to heave or show gaps between the planks if the flooring swells or shrinks, ...
How much does a hardwood nailer cost?
Hardwood flooring nailers rent for around $40 to $60 per day and are well worth the cost.
How to stop wood from squeaking?
Prevent wood squeaks by using a sound-absorbing underlayment between the subfloor and the hardwood flooring. The most common underlayment is 15-lb. felt paper, which effectively muffles sounds that occur when wood rubs against wood.
Can engineered flooring be installed over concrete?
Like solid hardwood, engineered flooring requires sound-absorbing underlayment, but because engineered flooring can be installed over concrete or existing flooring, the manufacturer may recommend a cushioned polyethylene-type barrier that also resists moisture.
Can tongue and groove flooring be nailed together?
Although tongue and groove solid hardwood flooring does fit together, it must still be nailed to a subfloor. Engineered tongue and groove planks, however, snap together to create a “floating” floor that is not physically attached to the floor below. This results in engineered flooring being more DIY-friendly than hardwood flooring.
Is plank flooring smooth?
Plank flooring has come a long way from the frontier days when rough-hewn boards were nailed to floor joists, resulting in rugged, and somewhat uneven, walking surfaces. Today’s hard-surface flooring is smooth and level, due in large part to the way it’s installed. Tongue and groove, a method of connecting board planks, ...
How to mark a subfloor?
Mark the first row by placing the groove side of a board against the wall near a corner, leaving a gap of approximately 3/16 of an inch between the board and wall. Mark the subfloor on the tongue side and measure the distance between the mark and the wall. Transfer this mark to the other side of the room and snap a chalk line between these points.
How to cut a board to length?
Mark the end piece for cutting by keeping the tongue pointed toward the wall while also flipping it upside down. Maintaining a rough 3/16-inch gap at the wall, use a pencil to make a mark where it meets the previous board. Cut the board to length with a miter saw. Nail through the face and tongue to hold it in place.
What is tongue and groove board?
Installing tongue-and-groove (aka T&G) boards is a fast, inexpensive way to panel any ceiling or wall. You can install T&G over bare framing, drywall or plaster, so it's a great cover-up for an ugly ceiling.
Can you mark electrical cutouts on tongue and groove?
It's really tricky to accurately mark cutouts for electrical boxes and other ceiling openings on tongue and groove. The secret is to scribe and/or mark as much as possible in place on the shiplap ceiling rather than to try to measure everything perfectly.
Can you put tongue and groove together?
(2) You have to seat the tongues and grooves together, and they don't always want to marry. (3) Tongue and groove isn't always flat, so you have to force the boards together to get them seated.
Can you fit grooves in tongue and seat?
Break off the groove flanges. On any installation, you'll have times when you can't fit the groove in the previous tongue and seat the board. In fact, it's almost always the case with the very last board. But it can also happen at shiplap ceiling protrusions or even at projecting inside corners.
Can tongue and groove be painted?
Tongue-and-groove boards are notorious for shrinking and expanding with changes in temperature and humidity. Unfinished tongue and groove boards installed in humid summer conditions can be an ugly mess during the dryness of winter. As the wood dries and shrinks, unfinished stripes will appear where the tongues withdraw from the grooves. But if you apply finish before installation, the tongues will be completely finished—no unfinished stripes to appear later! You could also opt for paint to finish your boards for a white shiplap ceiling look.
What is the diameter of a 16 gauge nail?
For example, a 16-gauge nail has a diameter of 0.063, which is only a fraction of an inch smaller than 15-gauge nail and very difficult to notice without using a digital caliper. Advertisement.
What is the gauge of a nail?
A nail's gauge represents its diameter. Common gauges for nails used in tongue and groove installation include 15, 16, 17 and 18. The gauge of a nail has nothing to do with its length. As such, it's possible to use 15-gauge nails with lengths of 1 inch, 1.5 inches or 2 inches. As the gauge of a nail increases, the nail is smaller. For example, a 15-gauge nail has a diameter of 0.072 inches, whereas an 18-gauge nail's diameter is 0.048 inches.
What is the difference between a 15 gauge and an 18 gauge nail?
For example, a 15-gauge nail has a diameter of 0.072 inches, whereas an 18-gauge nail's diameter is 0.048 inches.
