how do you open a dirty inground pool

How To Open An Inground Pool

• 1. Remove Water and Debris Off The Winter Pool Cover ...
• 2. Remove Your Pool Cover ...
• 3. Clean Your Pool Cover and Store It ...
• 4. Skim the Pool and Remove Debris ...
• 5. Remove Ice Compensator and Plugs ...
• 6. Reinstall Your Deck Hardware ...
• 7. Pool Filter and Pump Motor Set Up ...
• 8. Shock Your Pool ...

Full Answer

How do I open my inground pool for winter?

14 steps for opening your inground pool 1. Remove leaves & water from your pool cover (or safety cover) 2. Remove your winter cover 3. Clean & stow away your pool cover 4. Fill up your pool 5. Remove winter plugs & re-install skimmer baskets 6. Re-attach deck equipment 7. Set up your filter & pump 8. Power-on your filter & pump

How do I prepare my pool for opening?

Step 1: Clean up debris and check for wear and tear. Before you open your pool, take some time to survey the area around your pool. Trim overgrown trees and hedges. Sweep away nearby leaves.

How do you fix a pool that is too wet?

Remove the water and debris off your pool cover (you may want to invest in a cover pump if there is significant water accumulation). When pumping water off of your cover, you must keep a mid-skimmer water level in your pool, under the cover. After it’s cleared, take off the pool cover and reinstall your ladders and pool accessories.

How do you clean a dirty pool cover?

Use a pool cover pump or a shop vac to remove that old, dirty water and keep it out of your swimming pool. Once the cover is removed, hose it off and give it a thorough cleaning (we recommend using a specially formulated cleaner, such as PoolStyle Clean-N-Store), then allow it to dry.

How do you clean a really dirty inground pool?

Here is how to go about it;Clean the Pool Surrounds. ... Use a Skimmer Net to Clean the Water Surface. ... Vacuum Large Debris from the Pool Floor. ... Drain the Pool. ... Refill & Clean. ... Balance the Water. ... Skim, Vacuum & Filter the Water.

How do you open a dirty pool?

How to Open a PoolStep 1: Clean up debris and check for wear and tear. ... Step 2: Inventory your pool chemicals. ... Step 3: Remove the Cover. ... Step 4: Inspect the Pool. ... Step 5: Fill Pool to Middle of Waterline Tile and Do Final Debris Removal. ... Step 6: Turn on the Pool Filter and Test the Water.

How do I get the brown stuff off the bottom of my pool?

Mustard algae looks like sand in the bottom of the pool. Get rid of it by aggressively brushing the algae and adding Algaecide 60. If the pool is full of algae, add a flocculant (floc) to the water and vacuum up the coagulated algae that settles on the bottom of the pool.

How do you clean up a neglected pool?

It won't be easy, and it certainly won't be pretty, but we promise it will be worth it!Step 1: Remove Debris. ... Step 2: Drain the Pool. ... Step 3: Clear the Filter System & Check Equipment. ... Step 4: Scrub the Pool Clean. ... Step 5: Get It Professionally Inspected. ... Step 6: Fill It Up, Test Your Water & Enjoy!

Should you shock pool before opening?

Shock That Pool! We recommend double shocking at pool opening. To double shock, you'll use two pounds of chlorine shock (for chlorine systems) per 10,000 gallons of water. This fast-acting, quick-dissolving swimming pool shock from DryTec kills bacteria, controls algae, and destroys organic contaminants in pools.

How do you clean a pool that has been sitting for two years?

Recovering Pool Water Adjust the pH levels as well as the water hardness. Use pool shock until the dark green water turns blue-grey. Make sure the filter is running throughout until the water becomes clear. Use a clarifier and flocculant to coagulate and drop particles to the bottom of the pool.

Is it safe to swim in pool with brown algae?

Whether mild or severe, it isn't recommended. Significant amounts of swimming pool algae welcome a breeding ground of harmful bacteria that feed on algae. These bacteria pose health risks to swimmers, most commonly resulting in a skin rash. It can also cause various bacterial infections of the ears or eyes.

How do you get sediment out of bottom of pool without vacuum?

Use a rake to gather the debris pieces into a pile, and then remove the pile by hand. Bag it and dump it in a garbage. If the debris is floating and not in the bottom of the pool, you can opt for a leaf net to trap the debris along the water's surface.

Why is there always dirt at the bottom of my pool?

While larger debris like leaves get sucked up and caught in your skimmer basket, dirt is too tiny to be caught by any netted filters. Instead, it usually falls to the bottom of your pool, and doesn't get circulated through your pool system. That's why you might see dirt piling up in the bottom of your pool.

How do you restore an old inground pool?

Restore a Pool in Just 5 StepsStep 1: Fix Any Leaks. Leaks can be a serious problem for pools, and unfortunately they can also spring up in nearly any type. ... Step 2: Mold Remediation. ... Step 3: Replace Old Equipment. ... Step 4: Install a Pool Heater. ... Step 5: Put Up a Fence.

How long can an inground pool sit empty?

If ground water is not a problem a pool can be left empty for weeks or even months as long the hydrostatic relief in the bottom of the pool is open and functioning. If the time frame of the pool being empty gets into freezing weather there is real risk of freeze-thaw damage to surface of the pool.

Is it better to drain a pool or clean it?

Most in-ground pools will have to be drained and refilled at some point. But cleaning should not be the reason to do it. Pools will need to be drained and refilled every 5-7 years on average, or if there is a major necessary repair. Otherwise, avoid draining your pool if at all possible.

What is the fastest way to clean a dirty pool?

Method 1: No Drain Cleaning (Filter, Vacuum & Floc to Clean Mud)Start by Cleaning the Pool Surrounds. ... Use a Skimmer Net to Clean the Water Surface. ... Add Chlorine & Lots of It. ... Clean the Pool Floor with a Vacuum. ... Run Your Filter Continuously. ... Add Flocculant to Clear the Water. ... Test balance the Water. ... Clean the Pool Surrounds.More items...

How can I clear my green pool fast?

How to Fix Green Pool Water FastBrush the Pool Walls and Floor. ... Test The Alkalinity and pH Level. ... Shock Your Pool with Chlorine to Kill Algae. ... Run Your Pool Filter for 8 Hours (And Shock Again If Needed) ... More Water Testing and Adjust Pool Chemicals.

How much salt do I need to open my pool?

Ideally, you want between 2,000 and 4,000 parts per million. To obtain 4,000 parts per million in a freshly filled pool with no salt water, add 50 pounds of salt per 2,000 gallons.

Will baking soda clear a green pool?

Baking Soda and Green, Blue, or Yellow Algae You'll need to use an algaecide to kill the algae and superchlorinate your pool to clear the water. After this treatment, test your pH and alkalinity and add baking soda to raise alkalinity to at least 100 ppm and pH to between 7.2 and 7.8.

Is your pool losing water?

This is a fairly common problem pool owners have and there could be several reasons:

What to do if your pool is floating?

Clean out any debris that might be floating around with a pool net.

Why is it impossible to remove pool cover?

Over the winter, leaves, rainwater and debris tend to collect and weigh your pool cover down, making it impossible to remove on your own.

What does it mean when a pool filter cracks?

DE or sand filter cracks. If you are finding DE or sand in the pool or near the filters, there could be a damaged part in one of the filters. Take them apart and check for cracks.

Why is my pool draining to the bottom of the skimmer?

If it’s draining to the bottom of the return jets, it could be a return line leak.

How to get rid of leaves in pool?

Otherwise, you can use a simple leaf net to scoop up the debris. Once it’s as dry as you can get it, use your pool brush to sweep off any leaves and debris left on top.

What to do if your filter tank is dripping?

If you notice the filter tank dripping, try tightening the fittings.

What Chemicals Do You Need to Open a Pool?

Before you use any of these chemicals, be sure to shock your pool to burn off any organics that have accumulated during the winter. After 24 hours, bring a sample of your water to your local Latham professional.

How Long Does it Take to Open a Pool?

The process to open a pool can vary based on many factors, but in the end, the first swim of spring season will be well worth it.

How Long Does it Take a Pool to Clear Up After Opening?

If you can see the bottom of the pool, you may only need to wait about 24 hours for the pool to clear. If you can’t see the first step, you may need to wait a little longer.

What is breakpoint chlorination?

Breakpoint chlorination is the point where enough free chlorine is added to break the molecular bonds. Shocking kills all the microbes and bacteria that have built up during the winter. If you want to be extra thorough, double shock it and use two pounds of shock for every 10,000 gallons of water.

How long does it take for a pool to clear?

If you can’t see the first step, you may need to wait a little longer. If you followed the steps above, your pool should be crystal clear within several days. But if your water still looks green, despite following directions, you may need to balance the water. You may also need to check that your filters are functioning properly.

What is the best way to get rid of slimy stuff in a pool?

Algaecide: to get rid of the slimy stuff that turns your pool into a swamp. Stain treatment: to combat any stains that have appeared over the winter. pH increaser or decreaser. Calcium hardness booster. Alkalinity increaser. Chlorine: in tablet or granular form to kill bacteria. Shock treatment.

Why is it important to balance your pool?

Balancing your pool’s water chemistry is essential to keeping water clear, preventing damage and getting the most enjoyment out of your pool. Get tips for creating the right chemical environment for your pool.

How to balance alkalinity in pool?

First, balance total alkalinity because it’s like an umbrella measurement that can help protect pool conditions and keep chemicals levels in check. Raise total alkalinity with baking soda or soda ash and lower total alkalinity with muriatic acid. Aim to get total alkalinity to a range of 80 to 120ppm.

How to remove calcium scale from pool?

Check your tile and remove calcium scale and stains with a household tile cleaner or baking soda and a tile brush. For tougher stains, try using a pumice stone. Inspect the interior of your pool for damage and make repairs as needed.

What to use to check pH in pool?

Here’s what you’ll need to get the job done right: A good test kit or test strips for checking your pool’s pH, calcium hardness, total alkalinity, and chlorine levels. Chlorine granules or tablets. Shock treatment. Increaser/decreaser chemicals for alkalinity, calcium, and pH. Algaecide.

What to do when your pool is pre-opening?

Here are a few essential things to put on your to-do list: Remove drain plugs or winterizing plugs from the surface skimmers and wall returns, and restore directional fittings.

What to do if your pool is closed all winter?

If your pool has been closed all winter, you’ll need to do a little prep work to get your pool ready for another season of fun. Don’t worry, though. Opening an inground pool is easy. Follow a few easy steps and you’ll be perfecting your cannonball in no time!

How to balance pH in a pool?

Next, balance pH conditions. Increase pH with soda ash or baking soda. Decrease pH with muriatic acid. Aim to get pH to a slightly base level of 7.4. to provide a pleasant swim environment.

How to prolong the life of a pool cover?

You can prolong the life of your pool cover by storing it safely away from insects, rodents, and the elements. Once your swimming pool cover is clean and dry, tightly roll it and store it indoors or in a garage.