How To Paint Kitchen Cabinets Without Sanding
- Remove all hardware
- Remove doors and drawers
- Wipe down cabinets around the stove with a TSP based cleaner to remove grease
- Apply a liquid deglosser to remove the varnish
- Prime and paint
How to remove drawers from a cabinet?
How to clean a cabinet with degreaser?
How to degloss drawers?
What to use if you don't have a drill?
How to speed up drying process of cabinets?
How to get rid of a dull spot on a cabinet?
Where to apply deglosser?
See 4 more
About this website
Do You Have to Sand Kitchen Cabinets Before Painting Them?
Painting kitchen cabinets is a multi-step process that can give you great results — if you do it right! And according to Chris and Lexi Dowding of SwatchOut in Michigan, adequate prep work is the key to success. Labeling your doors, cleaning and prepping the wood, priming, and sanding in between coats of paint are absolutely necessary for a great finished product.
How to remove drawers from a cabinet?
1. Pull the drawers out from the cabinets. Clear out the drawers first and stack them in an easily accessible area. You may need to lift them up slightly to remove them from the tracks inside of the drawer unit. Be carefully not to pull the entire track away from the unit by pulling too hard.
How to clean a cabinet with degreaser?
Soak a clean cloth in water without any soap, and use it to clean off the frames, doors, drawers, and shelves. Be sure to get harder-to-reach places like corners and the undersides of the cabinets to rinse off all of the degreaser. Wait at least 1 hour for the water to dry.
How to degloss drawers?
Pour liquid deglosser onto a cloth and rub it onto the doors and drawers. Purchase a deglossing product from the hardware or home improvement store and take your doors and drawers outside or to a well-ventilated area. Then, put on a pair of work gloves and add a quarter-sized amount to a clean cloth. Rub the deglosser on all of the door fronts and backs, and apply it to the fronts of the drawers as well.
What to use if you don't have a drill?
If you don’t have a drill, you can use a screwdriver to remove the hinges and hardware. It might take a bit longer, but it is much less expensive than purchasing a drill for the project! If you have special hardware for your cabinets, it might be helpful to put the hinges and handles in a labeled bag.
How to speed up drying process of cabinets?
If you want to speed up the drying process, you can position a fan to blow on the wet cabinets.
How to get rid of a dull spot on a cabinet?
Pick the degreasing cleaner of your choice, and thoroughly scrub the cabinet doors, shelves, drawers, and frames to remove any leftover dirt or grime from the kitchen. Try to avoid scrubbing in one section for too long, as this can scratch the wood, causing a dull spot when you paint.
Where to apply deglosser?
Always apply deglosser in a well-ventilated area to avoid inhaling harmful fumes.
How to clean a cabinet with a deglosser?
Wearing gloves and using a scouring pad, rub on the de-glosser liberally in the direction of the grain; then wipe cabinets down. Using a wet rag, wipe the surface, making sure you’ve removed all the finish. Switch to a clean, dry rag and wipe the entire surface. The finish should now be matte.
What paint is best for kitchens?
For kitchens, much like bathrooms, we recommend moisture and mildew-resistant paint that won’t peel, even when it’s subject to lots of steam. A satin or semigloss paint works best in the kitchen.
How to get rid of angled trim?
Need to attack a bit of angled cabinet trim? You can get at those pesky grease splatters and dried spaghetti sauce with a microfiber sponge or a product like a Mr. Clean magic eraser.
How long does it take for a second coat of a sandpaper to dry?
Apply second coat and let dry for about 2 hours.
How long does it take for a bond coat to dry?
(Make sure to smooth out any drips on edges before they dry.) Apply bond coat to cabinet frames. Let the bond coat dry for 2 hours. Apply second coat and let dry for about 2 hours.
Can you sand before painting cabinets?
If you don’t want to sand before you prime, use some mineral spirits and a rough sponge to clean and lightly rough up the cabinet area you’re painting. This doesn’t open up the wood cabinet material as much as sanding but does get you some additional grippy area for the primer to adhere to.
Do you have to sand a cabinet?
You don’t always have to sand, but you should make sure that your cabinet surfaces are very clean. You wouldn’t want to go through all the trouble of painting only to have it flaking off months later!
How to label doors while paint is drying?
While the paint is drying, label each door and corresponding cabinet with numbered blue tape. Like this: I promise you think you’ll remember where each door goes, especially if you’re doing a small kitchen, but take it from me – you will not. Remove the doors, laying them on their backs to let the paint finish drying.
How long does it take for cabinet doors to dry?
Let your project dry for at least 24 hours and then reattach the hinges and pulls and match up the doors to the proper cabinets. I recommend that when you reattach the cabinet doors, leave them open for another day or so, just to let the paint really finish curing. This will prevent them from sticking together when they close. Or you can attach little bumper pads, which also helps keep the doors from banging closed.
What is satin finish?
The satin finish allows me to easily wipe down whatever drips or splats onto the surface, and they stand up well to scuffs and bumps. Chalk paint is famous for sticking to just about anything, and in this case it makes the perfect primer between the laminate surface and the Satin Enamels paint.
Can you paint over laminate cabinets?
What do you do if you want to paint your kitchen cabinets, but they’re not real wood? Using the right method, you can paint right over those laminate cabinets, or any other kind of laminate furniture that needs a color update!
Can you sand laminate before painting?
Sanding is not necessary to prepare laminate for paint, but you might want to check between coats to make sure you're getting an even finish. You can lightly sand between coats if you see raised brush or roller marks.
Is sanding paint a good idea?
Sanding is always a good idea when prepping to paint , but I’ll let you in on a little secret: I hate sanding. It’s messy, time consuming, and generally a nuisance that prevents me from jumping into a new project. So if there’s any way around it, I will take it.
Can chalk paint be sanded down?
And if you brush along the length of the surface, as if following the wood grain, this will give you a smoother finish later. If you end up with drips or raised areas, these can be sanded down after the paint dries, before your finishing coats.
How long does it take for cabinet doors to dry?
After 24 hours, the cabinet doors, shelves, and frames will have dried sufficiently. Return the drawers into their previous positions (ensure they are well latched in place). Using a screwdriver/drill, Fix the cabinet door hinges and fasten the doors into place.
Why do you need to prime cabinets?
Begin by priming the cabinet shelves and doors to set a firm base for better paint stickiness during the application process . A primer is necessary for boosting paint strength, reducing the number of coats applied, and eliminating the chances of frequent peeling when exposed to a harsh environment.
How do I clean a kitchen cabinet before priming?
Instead of sanding, Chris and Lexi use mineral spirits and a rough scrubbing pad to clean the cabinets thoroughly before priming them. This not only cleans the cabinet (paint doesn’t go on well over grease), but the scrubby sponge also roughs up the surface just enough to make the primer stick. See, the sponge is less rough than sandpaper and just effective enough. And since you’re cleaning the wood anyway, it doesn’t add any more steps to the already-tedious process!
Do you need to sand before or after painting?
Note: While you don’t have to sand before you prime, you do need to sand lightly after you prime and between each coat of paint. Yeah, it will take a while (probably about an hour and a half for a standard-sized kitchen), but it’s necessary to make sure the next coat goes on well.
Is painting kitchen cabinets a multi step process?
Painting kitchen cabinets is a multi-step process that can give you great results — if you do it right! And according to Chris and Lexi Dowding of SwatchOut in Michigan, adequate prep work is the key to success.
Can you sand a cabinet to smooth out the grain?
If the cabinets are in super-bad shape (really scratched or dinged up) or you want to smooth out a wood grain, sanding may be necessary. “I’ve found that most cabinets people want to repaint are in pretty good shape, and they don’t mind if you can see a little wood grain,” says Dowding.
How to remove drawers from a cabinet?
1. Pull the drawers out from the cabinets. Clear out the drawers first and stack them in an easily accessible area. You may need to lift them up slightly to remove them from the tracks inside of the drawer unit. Be carefully not to pull the entire track away from the unit by pulling too hard.
How to clean a cabinet with degreaser?
Soak a clean cloth in water without any soap, and use it to clean off the frames, doors, drawers, and shelves. Be sure to get harder-to-reach places like corners and the undersides of the cabinets to rinse off all of the degreaser. Wait at least 1 hour for the water to dry.
How to degloss drawers?
Pour liquid deglosser onto a cloth and rub it onto the doors and drawers. Purchase a deglossing product from the hardware or home improvement store and take your doors and drawers outside or to a well-ventilated area. Then, put on a pair of work gloves and add a quarter-sized amount to a clean cloth. Rub the deglosser on all of the door fronts and backs, and apply it to the fronts of the drawers as well.
What to use if you don't have a drill?
If you don’t have a drill, you can use a screwdriver to remove the hinges and hardware. It might take a bit longer, but it is much less expensive than purchasing a drill for the project! If you have special hardware for your cabinets, it might be helpful to put the hinges and handles in a labeled bag.
How to speed up drying process of cabinets?
If you want to speed up the drying process, you can position a fan to blow on the wet cabinets.
How to get rid of a dull spot on a cabinet?
Pick the degreasing cleaner of your choice, and thoroughly scrub the cabinet doors, shelves, drawers, and frames to remove any leftover dirt or grime from the kitchen. Try to avoid scrubbing in one section for too long, as this can scratch the wood, causing a dull spot when you paint.
Where to apply deglosser?
Always apply deglosser in a well-ventilated area to avoid inhaling harmful fumes.
