Here are our best tips for successfully painting your shutters a new color:
- Select the right paint. Ideally, look for something oil or water-based, though latex paint will also work fine.
- Get your shutter ready. ...
- Lightly sand. ...
- Apply your first coat. ...
- Let the shutters dry. ...
- Sand again. sand off any areas that aren’t smooth and remove remaining dust.
- Apply your second coat. ...
- Install on your home. ...
Full Answer
Why do you need primer on vinyl shutters?
Do you need painter's tape to paint shutters?
Can you paint vinyl shutters?
The Best Shutter Paint Colors | Martha Stewart
However, with the wide assortment of paint colors on the market, separating the stellar shutter hues from the so-so can be tricky."I strongly recommend homeowners invest in a high-quality paint," Wadden says. "Especially on your exterior, where the paint will be exposed to the sun, rain, and other elements, you want to use a paint that's going to last a long time.
Painting black vinyl shutters - Professional Painting Contractors Forum
I've have some black vinyl shutters that a customer wants repainted. I want to use the same paint, "SW Resiliance Gloss, Black Magic", I used to paint the trim around their front door to match. The SW dealer was worried that using the black color on the shutters might cause them to heat up and...
Why do you need primer on vinyl shutters?
Primer isn't necessary for vinyl shutters that are in good condition, because the paint will adhere to the vinyl surface without any problems.
Do you need painter's tape to paint shutters?
If you prefer to paint the shutters in place, then you will need to use painter's tape around the edges of the shutters to avoid painting the sides of the home or the windows.
Can you paint vinyl shutters?
Vinyl shutters are typically installed with either metal mounting clips or plastic mounting nails known as shutter loks. If the shutters are installed with metal mounting clips, they are relatively easy to lift off, but if they are installed with plastic mounting nails, it may be better to paint them in position. Before starting, inspect your shutters and decide on the best approach to the project.
Why do hurricane shutters work?
You can use them to protect your windows, doors, lanais, and more. Because they are impact resistant they will block flying objects and debris from hitting and damaging your home’s openings. This will prevent damage to glass, doors, screens, etc. It will also prevent water intrusion into your home.
What is storm shutter?
Storm shutters are engineered and built to be impact resistant and hurricane rated. They are tested to withstand up to a category 5 hurricane. Their main function is to protect the vulnerable parts of your Fort Myers home or business from flying objects and other dangers. They protect your windows, doors, lanais and more.
What does it mean when shutters are hurricane resistant?
In simple terms, this means hurricane shutters will withstand whatever a hurricane throws at them. You, your family and your property will stay safe and protected.
What is an accordion shutter?
Accordion shutters are storm shutters that open and close horizontally, similar to the fins of an accordion.
Why do you need a professional to install shutters?
Using a professional to install your shutters is critical to ensure they are installed correctly. This reduces the chances of your shutters being ripped off, damaged or worse during a bad storm.
How long does it take to install hurricane panels?
This is especially important if you have panels. Panels can take 2-3 days and some physical energy to install. Plan to give yourself adequate time. If you have never installed your hurricane panels before you can see our step-by-step instructions for installing panels.
Where are Eurex hurricane shutters made?
Eurex Shutters measures and custom builds all of its storm shutters locally at its facility in Lehigh Acres, FL . Our shutters meet and exceed all current Florida building codes. They also carry a 20-year warranty. Call us at 239-369-8600 today or fill out the quick form below to schedule your in-home consultation and estimate.
What to use to clean shutters before painting?
The last step before painting is a thorough cleaning of the shutters with a non-phosphate cleaner and a stiff nylon scrub brush. Traditional construction cleaners, like trisodium phosphate, can react with aluminum and cause corrosion. Read the label before applying a cleaner.
What paint should I use for shutters?
A semi-gloss paint or enamel is a good choice for shutters and house trim because the glossy surface helps shed water. Some aluminum shutters feature panels, but many of them have louver detailing that mimics the look of operable shutters. Spraying on the paint will give you the best results.
How to get a professional finish on paint?
The trick to achieving a professional finish is to apply multiple thin coats as opposed to one or two thick coats of paint. Spray on a light even coat of primer first and let it dry. Follow with three or more very light coats of paint. Don’t worry about getting full coverage with a single coat.
When did aluminum shutters come out?
Aluminum shutters are making a comeback. They first appeared in the 1960s and '70s on mobile homes, recreational vehicles and campers because they were lightweight and resisted rusting. Today’s shutter manufacturers produce high quality shutters in custom sizes and styles that boost a home’s curb appeal and add a finished touch to exterior windows.
Can you spray wood before painting?
Always test spray a scrap of wood before spraying the actual shutters. With both aerosol and spray gun painting, stopping and starting is a concern because it creates buildup in spots. To prevent the problem, use wide sweeping arm motions and start spraying before the sprayer passes over the shutter.
Can you rent an aerosol paint rig?
Paint sprayers come in consumer models and in commercial styles that are more expensive. You can usually rent a quality spray rig from a construction rental store for a fraction of its purchase price.
Can you paint shutters indoors?
Painting the shutters indoors isn’t recommended unless the weather outside won’t cooperate. If you paint indoors, ventilation is essential, but spray paint exiting an open window can settle on the outside of a house or nearby structures. Writer Bio.
Why do you need primer on vinyl shutters?
Primer isn't necessary for vinyl shutters that are in good condition, because the paint will adhere to the vinyl surface without any problems.
Do you need painter's tape to paint shutters?
If you prefer to paint the shutters in place, then you will need to use painter's tape around the edges of the shutters to avoid painting the sides of the home or the windows.
Can you paint vinyl shutters?
Vinyl shutters are typically installed with either metal mounting clips or plastic mounting nails known as shutter loks. If the shutters are installed with metal mounting clips, they are relatively easy to lift off, but if they are installed with plastic mounting nails, it may be better to paint them in position. Before starting, inspect your shutters and decide on the best approach to the project.
