First Steps:
- Fully open your sliding keypad cover – make sure it latches!
- Press 3-5-7
- Press “PROG.” (the red light should blink)
- Enter your Personal Identification Number (aka PIN)
- Press “PROG” again. (the red light will blink fast)
- Close the cover – make sure you’ve closed it completely
Full Answer
Why choose Baldwin keypad entry locks?
Beautiful and practical, Baldwin’s keypad entry locks combine the convenience of keyless entry with exceptional quality. With your own personal code, you can enter your home with just a few pushes of a button. You also get more control over who has access to your home. Assign a temporary code for contractors or guests.
Where can I find programming information for the different keyless entry models?
This article overview contains programming information for the different keyless entry models we support. Most model numbers can be located on a sticker on the back of the keyless entry.
What should I do if my key will spin without unlocking?
Corrects the symptom where the key will spin without locking or unlocking the lock Replace tailpiece on deadbolts and handle sets. Key will spin without operating the deadbolt
Are EV/Max remote control&keyless entries backwards compatible?
Remote controls and keyless entries ending with part number EV or MAX are backwards compatible with garage door openers manufactured after 1993. Click the following link for frequently asked questions (FAQs) for EV/MAX Remote Control & Keyless entries.
How do I reset my Baldwin keyless entry?
If you wish to reset your Baldwin® Evolved, press and hold down the reset button for 10 seconds until the lock beeps and the lock face LEDs flash red. Refer to Owner's Manual. Note: You will need to re-enroll your Owner phone and fobs, and you will need to resend eKeys to your users.
How do you program a Baldwin door lock?
0:051:28To add a user code make sure the door is open and press the program button once followed by theMoreTo add a user code make sure the door is open and press the program button once followed by the check mark symbol.
How do you program a Baldwin smart key?
0:000:50Just insert the functioning key turn it clockwise insert. The smart key tool then put in your newMoreJust insert the functioning key turn it clockwise insert. The smart key tool then put in your new key your lock is now rekey.
How do you set up a Baldwin Smart lock?
0:182:10Position touch the Baldwin name on the cylinder. The lock will lock. Wait a second touch the BaldwinMorePosition touch the Baldwin name on the cylinder. The lock will lock. Wait a second touch the Baldwin name again and the lock will unlock.
How do you reprogram a door lock code?
0:001:23Code type it on the keypad. The Sledge button will blink orange 3 time press the Sledge button.MoreCode type it on the keypad. The Sledge button will blink orange 3 time press the Sledge button. Press 3 enter your new programming.
How do you reset the code on a digital door lock?
0:252:30Remove the two screws at the top and bottom of the internal handle. And then carefully slide theMoreRemove the two screws at the top and bottom of the internal handle. And then carefully slide the keypad from the front of the door.
How do I find my Baldwin key code?
Q:How to find key code for Baldwin deadbolt? A: The keys that are supplied in the package with the lock set will have five numbers stamped on the key. Blank keys will not have any numbers (key codes) stamped on them. Helpful?
What is a smart key compatible Baldwin?
SmartKey is an advanced security breakthrough which allows you to rekey the lock in seconds. To rekey your lock with an entirely new key, simply insert the functioning key, turn a quarter turn clockwise, insert the learning tool, remove the existing key, and insert a new key. That's it!
How do you pair a smart door lock?
0:311:22Settings then turn on bluetooth unlock and open the door. And then take off the battery. CoverMoreSettings then turn on bluetooth unlock and open the door. And then take off the battery. Cover located in the interior. Unit press the registration.
How do you set a digital lock?
0:081:22So to reset it you pull out the shackle. Turn it 180 degrees push it in so it's like this you pushMoreSo to reset it you pull out the shackle. Turn it 180 degrees push it in so it's like this you push it in and turn it another quarter turn now it's in this position.
How do I reset my SmartKey deadbolt?
0:211:36If this is a brand-new lock open it using the combination zero zero zero once your lock is open youMoreIf this is a brand-new lock open it using the combination zero zero zero once your lock is open you can insert your reset tool which came with your lock.
How do you reset a smart lock deadbolt?
How to restore default settings on my Signature Series or SmartCode Deadbolt? Perform a factory resetRemove battery pack.Press and HOLD the Program button while reinserting the battery pack. ... Press the Program button once more. ... Perform the door handing process again to teach the lock the orientation of the door.
How do you program Baldwin evolution?
0:111:07Press and hold the program button on the back panel for 2 seconds. Now press and hold the fob closedMorePress and hold the program button on the back panel for 2 seconds. Now press and hold the fob closed against the back panel. The LED is blinking faster.
How do you change the key on a Baldwin lock?
To rekey your lock with an entirely new key, simply insert the functioning key, turn a quarter turn clockwise, insert the learning tool, remove the existing key, and insert a new key. That's it!
How do you adjust a multipoint door lock?
Simply depress the latch & slide the Black component upwards. Keep Latch is adjustable by +/- 2.5mm. This can be achieved by slackening off the two latch screws using a standard Cross head screwdriver, moving the latch to the desired position, & then re-tighten the two screws.
How do you pair a Z wave door lock?
Complete the following general steps to enroll a Z-Wave lock into your security system:Clear the lock. Many locks are enrolled with a Z-Wave network before they even leave the factory as part of a quality check. ... Enroll the lock. Enter the Z-Wave inclusion mode on your panel. ... Install the lock. ... Test the lock.