how do you remove a garbage disposal and return to original sink

How to Remove a Garbage Disposal

1. Unplug the garbage disposal from the wall socket. If your unit is hardwired to your house, you'll need the additional instructions in Step 2. If ...
2. If your unit is hard wired into your home, turn off the circuit breaker to the garbage disposal. Use a Phillips-head screwdriver to remove the ...
3. There will be a drain pipe extending from the side of the garbage disposal to the drain on the adjacent sink. It will be secured with slotted ...
4. A snap ring secures the garbage disposal to the mounting bracket. Slide a flat-head screwdriver under the snap ring to pry it open and off the flange.

Full Answer

How to unclog kitchen sink without garbage disposal?

• Rubber gloves
• Sink stopper
• Petroleum jelly
• A friend with an old rag
• Sink (or flat) plunger

How to unstop a kitchen sink with a garbage dispoal?

How to unclog a garbage disposal Garbage disposals work by breaking up food scraps before they reach the drainpipe, they do this with blades run by an electric motor that’s attached to the underside of your kitchen sink. Tempting as it may be ...

How to dismantle an under the sink garbage disposal?

• Turn off the power for the disposal unit at the breaker box.
• Remove the drain pipe.
• Remove the dishwasher inlet hose, if applicable.
• Remove the attachment ring from the disposal top.
• Turn the disposer over and locate a metal panel.

How to clean your kitchen sink and garbage disposal?

• Ice cubes
• Rock salt
• Baking soda
• White vinegar
• Citrus slices
• Borax
• Dish soap
• Toothbrush

How do you change a garbage disposal to a regular drain?

1:2718:25Replace A Garbage Disposal With A Regular Drain - YouTubeYouTubeStart of suggested clipEnd of suggested clipOkay so first we're going to disconnect. The the dishwasher from the garbage disposal as i said weMoreOkay so first we're going to disconnect. The the dishwasher from the garbage disposal as i said we did unplug the unit from the wall. So it's not plugged. In we're going to loosen up the screw.

Can I just remove a garbage disposal?

Where no dishwasher is involved, it is pretty simple. The plumber fits a new pipe that connects the drain to the outflow. If there is a dishwasher to deal with, its discharge pipe must also be connected. If all of this sounds complicated to you, it is probably best to not try to remove a garbage disposal yourself.

Can you remove garbage disposal from sink?

1:072:30How to Remove a Garbage Disposal | HGTV - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a screwdriver to loosen the screw of the hose clamp and disconnect the hose from the disposal.MoreUse a screwdriver to loosen the screw of the hose clamp and disconnect the hose from the disposal. Now you're ready to remove the disposal from under the drain. The disposal is heavy.

Can you reuse garbage disposal with new sink?

Buy new or reuse the garbage disposal cord Surprise! Most new disposals don't come with a cord and plug. If your old unit has a cord and plug, you can remove the whole assembly and reinstall it on the new unit. (Instructions are included with the new disposal.)

Is it hard to disconnect a garbage disposal?

Removing a garbage disposal may seem intimidating, but it's a deceptively easy DIY job.

How do I uninstall and reinstall my garbage disposal?

2:275:39How to Replace a Garbage Disposal | The Home Depot - YouTubeYouTubeStart of suggested clipEnd of suggested clipThat remove the snap ring and the entire mounting assembly will come off the sink's. Flange. Now useMoreThat remove the snap ring and the entire mounting assembly will come off the sink's. Flange. Now use a screwdriver to loosen and remove the nut holding. It remove the flange from above the sink.

How do you remove a garbage disposal?

Insert a screwdriver shaft into one of the ears on the lower mounting ring of the disposal, and turn it 1/4 turn counterclockwise to release the disposal from the mounting assembly. The disposal will come straight down so be ready to catch it.

Can you have a dishwasher without a garbage disposal?

Installing a new dishwasher does not require a garbage disposal and this optional appliance can be bypassed with particular piping attachments. However, residents must include an air gap within the new dishwasher installation so that the appliance agrees with local regulations.

Should I replace garbage disposal?

Nothing lasts forever. With garbage disposals, you'll usually be looking anywhere from eight to fifteen years before you'll need to replace the unit. Over time, the disposal may develop cracks or even spring a leak. When this happens, you'll likely need to replace the unit, as a repair wouldn't be worth your money.

How much does Home Depot charge to replace a garbage disposal?

Home Depot – The garbage disposal installation cost from Home Depot is approximately $119. However, this does not include the added cost of a garbage disposal unit, which costs an average of $161, bringing it to a total cost of $280.

How often should you change out your garbage disposal?

Garbage disposal should last up to 12 years, according to the International Association of Certified Home Inspectors (InterNACHI). But, like any appliance, how you treat it determines whether it lives longer—or shorter—than the average lifespan.

Are garbage disposals universal?

Garbage disposals come in different sizes and with different features. Motor sizes vary from 1/3 HP to one HP. The higher the HP, the better the garbage disposal will run.

How much does it cost to remove garbage disposal and return to the original sink drain?

If you're doing this yourself, it will probably cost you $100-200 for the different parts and pipes. If you’re paying a professional, you should ex...

Who can replace a garbage disposal?

Anyone can replace a garbage disposal, and you don't need to hire a professional to help you. However, if you are going to be doing electrical work...

How long does it take to remove a garbage disposal?

You can finish the work in 2-3 hours as long as nothing goes wrong. Allow slightly longer if you don’t have much experience.

What’s the difference between removing or replacing your disposal?

When removing your disposal entirely, you need to get rid of all of the components and fittings and then reassemble the plumbing underneath your si...

How to get water out of garbage disposal?

Place a paint tray or deep baking sheet under your disposal to catch any water that spills out. Next, unscrew the nut that connects you pipe to the trap where waste is shredded. Turn this nut by hand, or use channel locks to loosen it. Once the nut is loose, slide the pipe out of the garbage disposal.

What to do if garbage disposal is damaged?

If you decide to install a new garbage disposal, be sure to carefully examine the electrical outlet under the sink. If it is damaged or corroded, consider hiring an electrician to replace it for safety reasons.

How do I remove a snap ring from a garbage disposal?

To remove the snap ring insert a flat-head screwdriver under the ring to pry it open and off the flange. Make sure to hold the underside of the garbage disposal with your hand while removing.

How to connect a garbage disposal to a black and white wire?

Connect the electrical wires. On many disposals you will connect the ground wire to the green screw on the disposal, and then splice the white wires to white wires and black to black. Secure the connections with wire nuts and tighten the strain relief sleeve. Replace the cover plate on the disposal.

How do I clean a drain hole?

Clean the putty around the drain hole with a putty knife. Scrape the putty off using the putty knife. If the putty is very hard and difficult to remove then you should use a razor to remove the excess. After cleaning off the chunks of putty use a scrubbing pad and water to scrub the area clean.

How much does it cost to remove a garbage disposal from a sink?

Estimated Cost: $15 to $50. There are various reasons to remove a garbage disposal permanently from your kitchen sink. Garbage disposals are not recommended for homes with septic systems. If you've had problems with a septic system, or you've moved into a home on septic, it might be a good idea to remove the disposal.

How do I remove a garbage disposal from a wall?

Unplug the garbage disposal from the wall outlet. Place a bucket or other container under the drain trap to catch water that drains from the pipes. Use pliers to loosen the slip nut at each end of the trap bend. Unthread the nuts and pull the trap straight down to remove it. Loosen the slip nuts and remove the continuous waste pipe and the tee ...

How do I remove the drain hose from a dishwasher?

To remove the dishwasher drain hose, squeeze its hose clamp with pliers and shift it off of the hose end. If the clamp has a screw-drive, loosen it with a screwdriver and slip off the clamp.

How do I remove a sink flange?

To remove it, loosen and remove the three screws between the upper and lower mounting rings, and take off the lower ring. Use a flat screwdriver to pop the snap ring off of the cylinder of the sink flange that fits down through the sink hole.

What to do when you remove garbage without replacing it?

When you remove a garbage without replacing it, you have to install a new sink strainer, or basket strainer, in its place. You'll also need a new sink tailpiece, the vertical drain pipe directly below the strainer. In addition, you will likely need a new continuous waste pipe that extends from the tailpiece to the drain's P-trap or to a tee ...

What to do if your garbage disposal is not plugged in?

If your garbage disposal does not have an appliance cord plugged into an outlet, it is hard-wired and must be disconnected from the circuit wiring. Shut off the power to the disposal circuit at the circuit breaker before working on any wires.

How do I install a basket strainer in a sink?

Apply a ring of plumber's putty under the lip of the new basket strainer flange. Fit the strainer into the sink opening and make sure it is centered. Under the sink, place the rubber washer onto the strainer flange, followed by the bottom mounting cup, then thread on the mounting nut. Tighten the mounting nut until it is firm, using pliers. Remove the excess putty that oozes out from the strainer lip, on the top side of the sink.