Replace Your Kitchen Sink Basket Strainer
- Step 1: Loosen and unscrew the coupling nut and locknut The coupling nut is what keeps the drainpipe steady, while the strainer locknut connects the drainpipe to your sink. Loosen the latter using slip-joint pliers. Then, unscrew the coupling nut from its thread. If the basket spins, hold it tightly as you unbind the coupling nut. ...
- Step 2: Apply putty and reset the basket
How to repair kitchen sink strainer?
Instructions
- Remove the Sink Strainer. Start by removing the pipes that are connected to the old sink strainer. ...
- Prepare the Drain and Sink Strainer. Clean the area around the sink opening before installing the new strainer. ...
- Apply Plumber's Putty. Roll out a generous rope of plumber’s putty to a uniform width. ...
- Secure the New Sink Strainer. ...
How to fix leaking drain under kitchen sink?
Other Maintenance
- Dishwasher Hose. While you are under the sink, make sure your dishwasher drain hose is not too long. ...
- Garbage Disposal. The garbage disposal can last 10-15 years if you are using it properly and only putting items that are biodegradable in there.
- Check the Water. It is a good time to check the water to make sure it isn’t cloud y and doesn’t smell. ...
How to clean your kitchen sink strainer?
- Remove your drain cover.
- Flush your drain with boiling water.
- Pour 1/2 cup (110.40 g) of baking soda down the drain.
- Pour a 1/2 cup (118.29 ml) of white vinegar down the drain.
- Allow the mixture in your drain to fizz for 10 minutes.
- Flush your sink one last time with boiling water.
How to fix a leaking pipe under the kitchen sink?
- Unscrew the coupling nut joining the P trap with the pipe draining from the sink. ...
- Following the manufacturer’s instructions, wrap a length of plumbers tape around the threads of the pipe.
- Move the P trap back into position with the draining pipe and reconnect the pipes with the coupling nut. ...
- Run water to check if the seal holds.
What is the best strainer?
How to get a rusted locknut out of a lock?
Why is there water under my sink?
How to crack a locknut?
What to use if you can't use plumber's putty?
See 2 more
About this website
How do you remove a strainer basket from a kitchen sink?
3:4510:13How To Replace a Kitchen Sink Strainer | Hard To Remove Old PartsYouTubeStart of suggested clipEnd of suggested clipYou can take the mounting cup off the bottom. And also the old rubber seal. And then once that'sMoreYou can take the mounting cup off the bottom. And also the old rubber seal. And then once that's removed. Then the strainer body itself will be easy to just pop up through the sink.
How do you remove an old basket strainer?
1:076:42How to Replace a Kitchen Sink Strainer | Ask This Old HouseYouTubeStart of suggested clipEnd of suggested clipDown in between the sink and the strainer. And gotten down and filled water into the bottom of thatMoreDown in between the sink and the strainer. And gotten down and filled water into the bottom of that bowl. Okay now that water could sit there and just rust away that metal right there and the nut. So
How do you replace a kitchen sink basket?
0:501:53How to Remove and Replace a Sink Basket - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's called plumber's putty just take a little bit out of the container. Then rub my palms back andMoreIt's called plumber's putty just take a little bit out of the container. Then rub my palms back and forth like this to form this long shape. We'll then place the putty on the lip of the new basket.
Are kitchen sink strainers a standard size?
FITS STANDARD SINK DRAIN: The size of the sink drain strainer is 3.15 inch which can fit for most American standard 3-1/2 inch kitchen sink drains, universal size for opening of about 3.2"- 4".
How do you remove a sink drain strainer?
1:245:47How to Replace A Kitchen Sink Strainer - YouTubeYouTubeStart of suggested clipEnd of suggested clipPutty next we'll remove the brass nut off the new kitchen strainer that we can separate the piecesMorePutty next we'll remove the brass nut off the new kitchen strainer that we can separate the pieces out you'll first remove the metal lower half of the basket. Then you'll have a paper ring.
How do you remove an old kitchen sink drain?
0:252:08How to Replace a Kitchen Sink Drain - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt is completely loose insert long nose pliers into the sink strainer to keep it from turning whileMoreIt is completely loose insert long nose pliers into the sink strainer to keep it from turning while loosening the nut remove the rubber gasket from the underside of the drain.
How do you measure a kitchen sink strainer basket?
How to Measure a Sink Drain Opening for a Crumb CupMeasure the drain opening across its widest part. This gives you the diameter of the drain circle.Insert the end of the measuring tape into the drain, beside the edge. ... Note the measurements on a piece of paper and take them with you when you shop for a crumb cup.
What is a basket strainer for a sink?
In plumbing, a sink strainer is a type of perforated metal sieve or mesh strainer used to strain or filter out solid debris in the water system.
How tight should a sink strainer be?
1:553:23Kitchen Sink Strainer - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a needlenose pliers to hold it in position stick. The two prongs of the pliers into the holes ofMoreUse a needlenose pliers to hold it in position stick. The two prongs of the pliers into the holes of the strainer. And hold the pliers tightly.
What sizes do sink strainers come in?
Kitchen sink strainers come in several shapes and sizes, such as double cup, flange, basket, drain, back nut, and level strainers (with a diameter of 3.5 to 4 inches).
How do you measure a basket strainer?
The first consideration when selecting a Hayward® basket strainer is the amount of free open area. This is the ratio of the open area through the strainer basket to the cross sectional area of the pipe. A well-designed basket strainer should have an open area ratio of at least 4 to 1.
What size sink strainer do I need?
To check the kitchen sink drain size, take a measuring tape and place it across the center of the drain hole. That way, you'll get the maximum width between two opposite points. This should be the exact size of the drain opening for your sink.
How do you remove a drain lock nut from a sink?
How to Remove a Stuck Locknut From a Sink DrainAttach large, slip-joint pliers onto the sides of the locknut. ... Add heat while using the slip-joint pliers. ... Grip the tabs on the locknut and twist them off, using a pair of pliers.More items...
How do you get a stuck nut out of a sink drain?
Spray bathroom cleaner on the stuck nut and wipe up with a towel or rag. ... Spray the nut with penetrating lubricant. ... Tap the side of the lock nut with a hammer. ... Clamp a pair of locking pliers around the nut and lock into place. ... Heat the nut with a plumber's torch. ... Slip a nut splitter over the lock nut.
How do you remove a sink plug hole?
Loosen the slip nut on the underside of the sink drain hole with a sink basket wrench or pliers. The slip nut holds the tailpiece to the drain. The tailpiece is the straight length of pipe running directly from the drain hole into the P-trap. Turn the nut counterclockwise until it is completely loosened from the drain.
How do you remove plumbers putty?
2:003:32How To Remove Plumber's Putty - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you're unable to scrape it off try washing it off with water and soap. If some residue stillMoreIf you're unable to scrape it off try washing it off with water and soap. If some residue still remain behind remove them using a paint thinner or mineral spirit.
How to replace basket strainer, kitchen sink drain. Easy ... - YouTube
The Home Mender, Dustin Luby, shows us how to replace your kitchen sink drain , basket strainer, stopper. Easy! You can do it!🏆 NEXT LEVEL STUFF-----...
What are the Basic Tools Needed When Replacing a Sink Strainer Basket ...
You’ve got a rusty sink strainer basket in your kitchen sink that’s leaking, and you need to know what tools you’ll need to replace it. This article will give you a list of basic tools which you will need to accomplish this project. It’s important to remember that with the plethora of makers of under sink disposals there might be tools you’ll need but aren’t listed here.
Replace Sink Strainer Gasket DIY Plumbing - GardenFork
Remove the the strainer, and clean it and the sink surfaces. There may be old plumber's putty around the hole in the sink. Pick up a new gasket at your local hardware store, it will be a rubber gasket that also comes with a cardboard ring.
How to unscrew a basket strainer?
Unscrew the nut at the base of the basket strainer. Approach the basket strainer from below and unscrew the lowest nut. This should free the flanged tailpiece (a straight, collared tube) and top hat gasket (a small circle with a flat rim). Set these parts aside.
How to remove a large nut from a basket strainer?
Take off the large nut at the top of the basket strainer. There's one more large nut for you to unscrew. Remove this and you'll have complete access to the basket strainer.
How to get old sealant off of a drywall wall?
If there's old sealant or other gunk in this area, scrape it off with a putty knife. Serious buildup may require paint thinner or another solvent. Always follow the product's safety label instructions when using solvents.
How to get rid of putty in sink?
When you screwed in the basket nut, some of the putty squeezed out into the sink basin. Use a putty knife to scrape away every scrap of this excess putty, and throw it away. For good measure, tighten the nut further and scrape out the additional putty that emerges. Clean the basin with a rag to remove the last flecks.
What is a sink strainer?
A sink basket strainer is simple enough for anyone to understand. This mesh basket catches solid objects to save them from falling into the sink. Replacing one is usually a quick, simple job, but there are a few pitfalls to be aware of. Steps.
How to flatten a basket rim?
Apply plumber's putty to the underside of the basket rim. Coil it beneath the rim and use your thumbs to flatten it evenly against the surface. Use just enough putty to cover the underside of the rim completely. Apply too much, and you won't be able to push your basket flush with the sink.
Why is my sink leaking?
It's possible your leaky sink was caused by a puncture in the basin, rather than the basket strainer. Inspect the sink carefully, especially next to the hole where the old strainer may have obscured a puncture.
How long does it take to replace a kitchen sink strainer?
However, replacing a kitchen sink basket strainer is an easy and simple task to be done within an hour. You just need to be aware of the pitfalls that were discussed above. And selecting a durable quality sink strainer is also imperative.
How to apply putty to a basket strainer?
Before starting your task of applying putty, make sure your hands, putty knife and work station are dry and clean. Or else, if there is any moisture left, it’ll make the bond less effective. After a thorough examination, take a lump of putty and roll it into a dough snake. The putty dough should be enough to fit around the new basket strainer. If you find the putty hard and difficult to roll out, warm your hands from fire or any other heat source and then soften the dough with warm hands.
How To Check If Your Kitchen Sink Needs Replacement?
To become assured that the problem lies with your sink basket strainer, fill up your sink with water. Now place a tissue paper near the junction of the sink and drain pipe. If the tissue paper gets wet, it is confirmed that your basket strainer is indeed faulty and needs to be replaced.
What is a locknut on a sink?
The locknut is a piece of pipe that is attached to the sink. And the coupling nut is the one that keeps the drainpipe fixed and secured. Unscrew the locknut with the help of slip-joint pliers. Now as you removed the locknut, it’s time to unscrew the large coupling nut from the top of the basket strainer. Get the job done with the help of a plier or adjustable wrench.
How to flatten dough?
Twist and flatten the dough evenly using your thumb against the surface. Take a small amount of putty just to cover the underside of the basket edge. Applying too much putty will leave you with extreme difficulty while pushing the basket flush with the sink.
Can you replace a basket strainer in a kitchen sink?
So, you’ve to buy a kitchen sink which has all the features and flexibilities that you’re looking for. Once you’ve got the right basket strainer of the kitchen sink, the installation isn’t a difficult task at all. You can replace the kitchen sink basket strainer just following some easy steps.
Can you use silicone sealant on stainless steel?
Instead, you can use a silicone sealant for plastic or stainless putty for porous materials. If you are opting silicon sealant, load it into a sealing gun and apply some to the bottom of the basket edge. As this kitchen sink stopper sealant forms a very strong bond, your next replacement process will require some extra force.
What is the best strainer?
The best strainers have either a spin-lock or a twist-and-drop style stopper. The spin-lock stopper doesn't have any parts that can wear, but screwing it in and out can be annoying. The twist-and-drop style is much easier to use but requires occasional O-ring replacement.
How to get a rusted locknut out of a lock?
If the locknut is rusted in place, spray it with penetrating oil. If you don’t have large enough pliers to get a good grip, loosen the locknut by tapping the locknut with a hammer and an old chisel. (If the locknut won’t move, see the next step, below.)
Why is there water under my sink?
If you discover a puddle of water in the cabinet under your sink, it may be caused by a leaky basket strainer. Old plumbing fittings can be tricky to loosen, but we’ll show you how to tear them apart and put them back together without any strain. You can pick up all the necessary supplies at a hardware store or home center.
How to crack a locknut?
Cut the locknut. If all else fails, chuck a metal cutoff wheel into a rotary tool and cut the locknut. Cut until you reach the cardboard ring above the nut. Don’t cut into the sink. If the nut still doesn’t spin, fit your chisel into the cut area and smack it with a hammer to crack it open. Wear eye protection.
What to use if you can't use plumber's putty?
If you can’t use plumber’s putty, use a non-water-based silicone. Excess putty will squeeze out between the new basket strainer and the sink when you tighten the locknut in place. Wipe it off with a rag or paper towel.
