How to Replace a Shower Faucet
- 1 Turn Off the Water Turn off the water supply. ...
- 2 Remove Old Trim ...
- 3 Remove Old Valve and Choose New Valve ...
- 4 Sweat the Pipes ...
- 5 Assemble the New Valve Section ...
- 6 Install a Stringer and Test for Leaks ...
- 7 Install the Cartridge ...
- 8 Install the Tub Spout ...
How do you repair a shower faucet?
- Turn the shower off and take out the handle
- Also, take out the escutcheon plate. ...
- Get a plier and, with it, loosen the locking nut and pull the cartridge from the valve’s center.
- Next, push a new rubber seat along with a spring into the valve by putting it on the end of a pencil and pushing it in. ...
- In the existing valve, put in the new cartridge
How to repair Price Pfister shower faucet?
Repairing a Leaking Price Pfister Shower Faucet (replacing/tuning Up the Cartridge)
- It Leaks, and Its Annoying. So the way these things work is, your handle works kind of like an airlock.. ...
- Removing the Handle. Underneath the handle there should be a small hole with a hex head screw in it, its a set screw to keep you from being ...
- Clearing a Path. ...
- The Internal Cartridge. ...
- Checking for Damage. ...
How to replace a single knob shower faucet?
- Use a Philips screwdriver to remove the screw. ...
- Once the screw is out, pull out the knob. ...
- Remove the escutcheon. ...
- Install the new escutcheon. ...
- If you don’t want to replace the escutcheon, clean the old escutcheon/stop tube especially if there are mineral deposits on it to allow the new handle to slide in freely.
How to repair a dripping shower faucet?
- If the handle has a cap, remove it with a flat head screwdriver. Use a Phillips screwdriver to unscrew the handle.
- Remove the faceplate behind the handle from the shower wall. ...
- Find the metal sleeve over the shower valve. ...
- If the shower valve has a locking clip, pry it off with needle nose pliers or a screwdriver.
Where is the shut off valve for a shower?
Why is my shower faucet sticky?
How to pull out a cartridge?
Can a pull out shower handle be fixed?
How do you replace a push pull shower handle?
InstructionsRemove Faceplate and Screw. Remove the index button, or faceplate, located on the middle of the faucet handle. ... Remove the Sleeve. ... Remove the Clip. ... Pull out the Cartridge. ... Grease the New Cartridge. ... Replace the Cartridge and Clip. ... Replace the Sleeve and Faceplate. ... Check the Water.
How do you replace a shower faucet without the access panel?
If you don't have an access panel, you might be able to replace the faucet by cutting a hole in the shower surround (Problem 3 below), but the best solution is to install a paintable plastic panel behind the faucet.
How do I know what model shower faucet I have?
0:443:16Who Made Your Shower Faucet? Tips to Find the Brand and ManufacturerYouTubeStart of suggested clipEnd of suggested clipAnd look behind the session plate to see if there's a label behind it and a lot of times there isMoreAnd look behind the session plate to see if there's a label behind it and a lot of times there is and it indicates not only the manufacturer. But also the exact model of the faucet that you have
How do I fix my shower pull tab?
0:001:17Shower Repair : How Do I Repair the Diverter in a Shower? - YouTubeYouTubeStart of suggested clipEnd of suggested clipSome of them are threaded. Some of them are a slip. Fit. Now this particular one like I said has anMoreSome of them are threaded. Some of them are a slip. Fit. Now this particular one like I said has an allen wrench set screw.
Can you replace a shower faucet without replacing the valve?
Yes. In fact, sometimes, just changing the shower handle without replacing the valve makes the most sense. A shower handle gets the brunt of the whole “taking a shower” business — getting twisted and turned, pushed and pulled. It's no wonder they age quickly.
Can you change shower valve without removing tile?
If you are fortunate, your shower control wall will be adjacent to a wall that allows the plumber to access it by simply cutting the drywall on its opposite side. If this option is not available, the plumber will have to access the valve from the tiled side of the control wall.
Where do I find my faucet model number?
0:513:20Quick Ways to Identify the Brand and Manufacturer for Faucet RepairYouTubeStart of suggested clipEnd of suggested clipAnother quick tip is to look underneath the sink because sometimes you might be able to find a labelMoreAnother quick tip is to look underneath the sink because sometimes you might be able to find a label that's attached to a supply line that will tell you the manufacturer.
Are shower faucets universal?
Shower valves are not universal and you cannot mix manufacturers when it comes to trim and rough-in valves. Besides that, one manufacturer will have different valve sizes and types which may also not be universal and interchangeable with each other. Luckily, shower sets are always sold as a complete set.
How do I know what brand of faucet I have?
0:063:20Quick Ways to Identify the Brand and Manufacturer for Faucet RepairYouTubeStart of suggested clipEnd of suggested clipOkay so the easiest way to figure out what brand of faucet you have is to look on the outside to seeMoreOkay so the easiest way to figure out what brand of faucet you have is to look on the outside to see if you can find the logo or the name brand of the manufacturer. Sometimes this can be covered up by
How does a push button diverter work?
A diverter is essentially a tap which directs water to flow through a shower or bath spout. It's often a push-pull button that when pressed in or pulled out, will divert water to the correct fixture.
What does a shower diverter valve look like?
The diverter looks like a pin pulled upward from the bathtub faucet spout. It's possible that it may come in the form of a third handle or a button that needs to be pushed or pulled. Either way, when the valve is activated, it engages a rubber stopper, which causes the water to flow in a different direction.
Why is my shower pull cord not working?
It is probably just faulty and worn down after strenuous use. Replacing the shower chord should fix it. You need an electrician.
How do I know what brand my shower handle is?
0:003:16Who Made Your Shower Faucet? Tips to Find the Brand and ManufacturerYouTubeStart of suggested clipEnd of suggested clipItself usually there's a mark on it some indication as to who the manufacturer is it could be eitherMoreItself usually there's a mark on it some indication as to who the manufacturer is it could be either the name of the manufacturer. Or it could be a logo. If you can't see it easily.
Where is the model number on a Delta shower faucet?
The model number is on all packaging, some faucets, and all installation instructions provided with your faucet. On the packaging, look near the UPC code or the top of the box. On the faucet, a model identification tag has been attached to most models manufactured since 2012.
What kind of valve do I need for my shower?
Pressure balancing valvesPressure balancing valves, also called mechanical or anti-scald valves, are the most common types of shower valves. A pressure balancing valve is designed to rebalance the water pressure to keep the shower from becoming excessively hot.
How do I identify my American standard shower valve?
Look on the base of the shower faucet spout on the front. American Standard shower faucets have the words "American Standard" printed on them. If your faucet is corroded or has lime scale, spray with a cleaning agent and wipe it with a towel to make the letters legible.
Where is the shut off valve for a shower?
In most cases, shower shutoff valves will be found in an access hatch behind the shower wall. If you can't find fixture shutoff valves, then you may need to shut off the water to the entire house. First, disassemble and remove the cartridge. Once disassembled, carefully examine the cartridge. If it is otherwise in good shape, ...
Why is my shower faucet sticky?
If it is otherwise in good shape, the handle may be sticky simply because the factory lubrication has worn off the cartridge over time. Note: Although the process may differ a little, virtually all single-handle, pull-out shower or tub faucets can be fixed in this way.
How to pull out a cartridge?
You will see a metal tube, called a sleeve, that covers and protects the cartridge. Pull it out using your hand or tug on it with needle- nose pliers.
Can a pull out shower handle be fixed?
The cartridge is there to control the water flow of the shower and tub, but it can become corroded over time making it difficult to use the handle. Although the process may differ a little per handle, virtually all single-handle, pull-out shower or tub faucets can be fixed with these steps.
What is the replacement for a 1200 brass faucet?
If your faucet is more than twenty years old it might have a brass (1200) cartridge. The 1225 replaces the old style 1200. Sometimes the old 1200 cartridges break (separate) when people try to pull them out. The puller pictured below is the best to have if a cartridge separates. The plastic housing on the 1225 helps make future removal much easier.
What happens if you turn on a faucet and no water comes out?
If you turn on the faucet you are fixing and no water comes out, you probably can continue to work on replacing the cartridge. Be careful. More water might drain down as parts are removed.
How to test if a stainless steel faucet is hot or cold?
The stainless steel tube should slide over the “horse shoe” clip and new cartridge so you can test to make sure hot and cold come out of the faucet when the handle is turned correctly. This faucet has an easy to reverse feature. So, it is important to make sure turning the cartridge to the left provides hot water. Turning the cartridge stem 180 degrees before installing the handle reverses hot and cold.
How to remove horse shoe clip?
Later, if you don’t carefully and patiently slide the ends of this “horse shoe” type clip, completely down, you will have problems. If you rush and force this clip too fast, you will bend it and will have to get it back to being perfectly flat. Often, there will be a hole in the top of this clip to make it easy to use an ink pen or small nail, to slide the clip up and out. Sometimes a faucet is so far inside the wall that the face plate screws and face plate will have to be removed to reach the horse shoe clip. Always be careful to not drop the clip down the drain or in the wall.
What cartridge do I need for a Moen faucet?
If you run into or cause complications, you might have to call an emergency plumber. You need to buy a 1225 cartridge made by Moen. I have seen problems with copy cat generic cartridges so make sure Moen made the cartridge. If your faucet is more than twenty years old it might have a brass (1200) cartridge.
How much of the time do you need a Moen puller?
Now, 95% of the time you can take pliers and pull the old cartridge straight out like pulling out a tooth. 3% of the time you will need a special Moen puller. 1% of the time you will need an experienced plumber with easy outs and all kinds of tools. 1% of the time, the faucet will have to be replaced.
Can you drop a horse shoe clip down the drain?
Always be careful to not drop the clip down the drain or in the wall. After the retaining (horse shoe type clip) is removed, it helps if you loosen the old cartridge. If you use the white plastic end cover (packing material) that comes with the new cartridge.
What to do if shower valve is damaged?
If your shower valve is damaged beyond repair, you may need to replace it to prevent leaks. Removing your old valve and installing a new one can take time, but with patience, a novice handyman can do it without the help of a plumber.
What to do if you can't find water stops for shower?
Turn off the water supply to the entire house if you cannot find the water stops for your shower.
How to get a valve out of a wall?
Use pliers to pull the valve out of the wall. Grip the metal end of the valve cartridge firmly and pull the valve back and out of the wall. If it gets stuck at any point, wiggle it as you go to dislodge it. After you take it out of the wall, set it aside or discard it to keep it out of the way.
Why won't my valve cartridge slide into the wall?
If your valve cartridge will not slide into the wall or seems too small for the slot, you may have bought the wrong size. Double-check the valve size and model to make sure it matches your old cartridge.
How to remove a valve set?
Some valve sets are secured with a retainer nut that holds them in place. To remove the nut, hold the valve while you unscrew the nut with a wrench. You can then proceed with removing your valve.
What is a shower trim plate?
Shower trim plates are usually known as Escutcheon trim plates, in case you need to ask a home repair professional about your specific model.
What to do if there is no water shut off valve?
If there are no shutoff valves behind the wall, you will need to locate and turn off water to the entire home and then open a fixture to relieve the pressure and drain the water.
Where is the shut off valve for a shower?
In most cases, shower shutoff valves will be found in an access hatch behind the shower wall. If you can't find fixture shutoff valves, then you may need to shut off the water to the entire house. First, disassemble and remove the cartridge. Once disassembled, carefully examine the cartridge. If it is otherwise in good shape, ...
Why is my shower faucet sticky?
If it is otherwise in good shape, the handle may be sticky simply because the factory lubrication has worn off the cartridge over time. Note: Although the process may differ a little, virtually all single-handle, pull-out shower or tub faucets can be fixed in this way.
How to pull out a cartridge?
You will see a metal tube, called a sleeve, that covers and protects the cartridge. Pull it out using your hand or tug on it with needle- nose pliers.
Can a pull out shower handle be fixed?
The cartridge is there to control the water flow of the shower and tub, but it can become corroded over time making it difficult to use the handle. Although the process may differ a little per handle, virtually all single-handle, pull-out shower or tub faucets can be fixed with these steps.