Separate the blending blade lid from the cup. Using tweezers, grab the gasket at the indented lip which is located on the side of the blending blade. Slowly pry the rubber gasket up. Almost done! To reassemble your device, follow these instructions in reverse order.
Does NutriBullet sell replacement gaskets?
Unfortunately, Nutribullet does not sell the replacement gaskets without having to buy a whole new blade assembly. I was told that the reason that Nutribullet doesn’t sell replacement gaskets is due to liability and therefore they only sell the blade. Side Note: The rubber gasket does come out sometimes when unscrewing the blade and this is normal.
Can I buy a replacement gasket for my Blade?
Gaskets are not sold individually. Each blade comes with a deep-seated gasket to ensure that it does not fall out. We do not sell replacement gaskets because gaskets are difficult to properly install and get stretched or damaged in the process. If you do find nutribullet gaskets for sale, do not buy them.
How do I buy a replacement blade for my NutriBullet?
Buying a replacement blade is pretty simple and you just have to look at the blender model you have or call Nutribullet support if your model has been discontinued.
How do I know when to replace my NutriBullet?
Over time, if you start to notice that the sieve is looking dull, or is not working as efficiently as before, then it is likely due for a replacement. Always use genuine nutribullet ® replacement parts.
What should I do if my gasket loosens?
What is the best way to clean your blade and gasket?
Can you remove the gasket from a blade?
Can I buy just a gasket?
Does the NutriBullet have a gasket?
Each blade comes with a deep-seated gasket to ensure that it does not fall out. We do not sell replacement gaskets because gaskets are difficult to properly install and get stretched or damaged in the process. If you do find NutriBullet gaskets for sale, do not buy them.
Why is my NutriBullet leaking?
Cause 1: Extractor Blade is Not Screwed onto Lid Tightly If the NutriBullet's lid is not tightly screwed onto the blender's base with the extractor blades, the blender can leak. Check to see that the extractor blade is screwed onto the cup lid properly by using the ridges on the blender cup as a guide.
How do you replace the gasket on a magic bullet?
4:526:29How to fix a leaking Magic Bullet blender - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe'll get a new gasket the first one you just place right on the shaft. And let it go all the wayMoreWe'll get a new gasket the first one you just place right on the shaft. And let it go all the way down. Then you take the blade shaft and put it on to the base flip it upside down get another gasket.
Where does the cup ring go on the NutriBullet?
Remove the blade, screw on the lip ring to cover the grooves on the cup and sip that smoothie! It's that simple.
How do you clean a leaking NutriBullet?
How to clean the nutribullet Power Base? If you encounter a spill within the power base, immediately shut down and unplug the nutribullet. Remove the blade and cup and with a damp sponge or towel, wipe up any spillage. Do not remove any parts from within the power base, simply clean around them.
Why is my blender leaking black?
Old food – I know this is nasty, but the most common cause of black stuff leaking is old food that has been left to rot away and form an unpleasant liquid. If it smells bad, this is your issue. Blender lubricant – The liquid could also just be the lubricant used to make sure your blender works like it's supposed to.
How long should a NutriBullet last?
But just how long does it last? We've researched the longevity of the Nutribullet to give you the answer. Nutribullet blenders are guaranteed for 1 year of performance. However, your Nutribullet can last well over 5 years given appropriate use and care.
Can I use blender without rubber ring?
The short answer is no. If you've ever blended without a rubber ring on the blender, you'll know that it's not a good idea. Without the rubber ring, the blender is likely to leak and/or make strange sounds.
Does the magic bullet have a rubber gasket?
Using tweezers, grab the gasket at the indented lip which is located on the side of the blending blade. Slowly pry the rubber gasket up.
How do I know what model my NutriBullet is?
The serial number is on a white sticker, under the barcode under the power base.
How do you put together a NutriBullet?
2:324:37Nutribullet Blender Review And Demonstration (Making A Smoothie)YouTubeStart of suggested clipEnd of suggested clipAlong that area right there and there are spaces. Along the top of the nutribullet. If you line upMoreAlong that area right there and there are spaces. Along the top of the nutribullet. If you line up the notches with the spaces. And you press downwards it will start to blend everything together.
Can you use frozen fruit in a NutriBullet?
Although most NutriBullet can handle frozen fruit, remember frozen fruit is harder than fresh fruit. It is best to let the fruit thaw a little first, especially with the smaller models. Just take the fruit out of the freezer, prep the rest of the ingredients.
How do I tighten my NutriBullet blade?
0:391:23Nutribullet extractor blade replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn it counterclockwise. Bring it all the way down and just fingers snug it'll tighten up as theMoreTurn it counterclockwise. Bring it all the way down and just fingers snug it'll tighten up as the motor spins it that's it.
What happens if you overfill a NutriBullet?
Do not overfill the cup. Going above the “max” line can sometimes cause the device to leak. Do not run the motor for more than 40 seconds at a time. Failure to adhere to this time limit can cause the NUTRiBULLET to overheat and this can damage the device.
How do I fix my NutriBullet motor?
Unplug the NutriBullet blender and let it rest for a few minutes. Then, plug the blender back in and try to use it, again, making sure not to leave the blender running for more than one minute at a time.
How do I claim my NutriBullet warranty?
Obtaining Warranty Service For limited warranty service, simply call our customer service department at 800-523-5993 or contact us via email from our website at www.NutriBullet.com/contact-us/ simply click the Contact Us link, fill out and submit the customer contact form and we will be glad to help you.
Introduction
This guide will demonstrate how to replace a damaged rubber gasket on the blender blade lid of your cup. The rubber gasket is responsible for sealing the cup from leaking. Other possible problems can be found in our Troubleshooting Guide.
Step 2
Use tweezers to peel back the rubber gasket that surrounds the inner ring of the lid.
Team
Choose a size and copy the code below to embed this guide as a small widget on your site / forum.
Introduction
Did your device leak liquid? Do it seem to not seal as well as before? Replace the gasket to create a new seal and prevent leaking from your cup.
Step 2
Using tweezers, grab the gasket at the indented lip which is located on the side of the blending blade.
How to clean nutribullet?
Simply place the cup and lid on the top rack of the dishwasher or hand wash with warm, soapy water and rinse. Gently rinse the blade assembly and carefully clean with a damp sponge or cloth.
Why is my Nutribullet Juicer not turning on?
If your nutribullet Juicer™ is not turning on after a period of heavy use, it’ s likely that the unit has overheated. Your machine is programmed to temporarily shut down as a protective measure when it senses overuse. If or when this occurs, unplug the unit and allow it to cool for at least 15 minutes before plugging it back in and attempting to use again. Do not touch or hold the Juicer if the unit is hot to the touch.
Why is my Kitchen Express not turning on?
If your magic bullet Kitchen Express™ is not turning on after a period of heavy use, it’s likely that it has overheated. Your machine is programmed to temporarily shut down as a protective measure when it senses overuse. If/when this occurs, unplug the unit and allow it to cool for at least 15 minutes before plugging back in and attempting to use again.
How long can you use a sealed coffee cup?
Never continuously operate with a sealed cup for longer than one-minute. The longer your blend cycle is on, the longer pressure builds inside the cup. If your blending cup becomes warm to the touch, allow the cup to cool completely before carefully opening.
Why isn't my Magic Bullet Kitchen Express turning on?
If your magic bullet Kitchen Express™ is not turning on, it is likely that it is either assembled improperly, or that it has overheated. If using the work bowl, make sure the lid is properly attached and locked in place by matching the lid lock icon to the silver arrow on the work bowl handle. Once the lid is secured, set the bowl on the power base and gently twist clockwise to lock into place. If using the cup, make sure the blade is securely fastened to the cup before locking the blade into the power base using the same gentle clockwise twist.
Can you mix soda in a nutribullet?
Hot ingredients like coffee or carbonated ingredients like soda should never be blended in the NutriBullet (with the exception of the vented pitchers of the NutriBullet Blender and the NutriBullet Blender Combo). The ingredients can build up pressure and cause damage to the components and even cause injury.
Can you take a nutribullet in your luggage?
Yes. As the nutribullet® GO features a lithium- ion battery and contains blades, we recommend that you pack your nutribullet® GO, with the cup or lid securely attached, in your checked luggage without any liquid inside.
Where to Buy Nutribullet Replacement Parts ?
Most retailers only sell the entire Nutribullet blender set and not the separate Nutribullet parts. I keep this post updated with the best deals on authentic Nutribullet parts.
What type of gasket does a Nutribullet blender use?
The gaskets can be potentially be different depending on how old your Nutribullet blender is but this is not common. Most of the Nutribullet models use a rubber gasket with a lip on it like the ones I link to below.
What blades do I need for a Nutribullet 600?
The 600 and 900 motor base are the same diameter and 4inch diameter blades can work for both the 600 and 900 models but Nutribullet recommends only using the style blade that comes with the blender model you buy. (Note – When I use the 600watt Nutribullet model, I usually just use the 900watt extractor blade on it and it works fine)
How often should I replace my Nutribullet extractor?
Nutribullet recommends replacing your extractor blade every 6 months for optimal performance but that seems a little extreme to me. Personally, I get a new blade every 2 1/2-3 years and never had a problem so it really depends on what you are blending.
What size cups do Nutribullet 600 use?
The standard cups will work with the Nutribullet 600 and 900 Pro models and any other similar model that uses the same diameter jars. The 600 watt model has a weaker motor so it is intended to work with the smaller 24oz Tall and 18oz Short cups.
How long is Nutribullet's warranty?
If you need to replace the motor base then I would suggest checking first with Nutibullet about warranty. The current warranty on Nutribullet blenders is 1 year.
Can you use a collossal cup on a Nutribullet 600?
You can technically fit the Collossal cup on the smaller Nutribullet 600 model and it will work perfectly fine but the motor might not be strong enough to finely blend a large of amount of ingredients (depends on the ingredients). Side Note – I use the 32oz cup on the 600watt model lots of times and it blends fine.
What should I do if my gasket loosens?
If your gasket loosens or falls out at any point, purchase a new Extractor Blade for your nutribullet. It is recommended that you change out blades at least every 6 months if you use the nutribullet regularly.
What is the best way to clean your blade and gasket?
Wash your blades by hand with warm, soapy water and a dish brush to loosen any stuck-on debris. If you want a deeper clean, rinse the blade with a 10% dilute vinegar and water solution or lemon juice. We recommend hand washing over dishwashing as the heat from some dishwashers may damage the gaskets and cause them to loosen and fall out.
Can you remove the gasket from a blade?
Often people think that to properly clean their blade, they need to remove the gasket. Stop right there, the gasket should NEVER be removed from the blade. This loosens the gasket and makes it less effective at doing its job.
Can I buy just a gasket?
Gaskets are not sold individually. Each blade comes with a deep-seated gasket to ensure that it does not fall out. We do not sell replacement gaskets because gaskets are difficult to properly install and get stretched or damaged in the process. If you do find nutribullet gaskets for sale, do not buy them. They are counterfeit and not recommended for use with your nutribullet. If the gasket becomes unseated, we recommend replacing the blade assembly.
