how do you reset the code on a first alert safe

How to break into a First Alert Safe?

Email the notarized form to our Support Team at [email protected], or fax it to 800-603-2878. After First Alert confirms receipt of the notary letter, send the key replacement fee: Combinations or override passcodes: Free of charge. Steel cash and security box replacement keys: $7.95 each.

How do you open a First Alert Safe?

Feb 28, 2020 · How do you reset the code on a First Alert Safe? Open the protective cover on the front of the safe to expose the keypad. With the safe in the open position, press the small reset button located on the inside top edge of the door.

How to crack open a First Alert Safe?

Jan 23, 2020 · How to Change the Combinations on First Alert Home Safes. Lift the round protective cover from the digital keypad, tilting the cover upward from the base to expose the keypad. Enter the current combination or the preset factory code if the safe is brand new. Press the reset button on the top inside edge of the door to begin the combination programming …

How to open a First Alert Safe without key?

May 21, 2021 · Press the small reset button found on the inside top edge of the door. Red and green flashing lights on the keypad indicate program authorization. You have 10 seconds to begin. Enter your chosen three- to eight-digit passcode followed by the # key. Immediately reenter the passcode, again followed by the # key.

How to reset a first alert safe?

How do you reset the code on a First Alert Safe? Open the protective cover on the front of the safe to expose the keypad. With the safe in the open position, press the small reset button located on the inside top edge of the door. Enter your new three to eight digit (3-8) passcode followed by the # key. Click to see full answer.

How to open a safe with an emergency key?

Insert the emergency key into the emergency keyhole and turn it until the safe opens.

How to reset a safe?

Open the safe with a key. Enter your code to open the safe. Place the electronic digital safe into code reset mode. Enter your new code on the keypad and press "#" to finish.

How to reset a first alert smoke detector?

Secondly, how do I reset my First Alert smoke detector? Remove the alarm from your ceiling or wall. Open the cover and take out the battery. Press and hold the test button for 15-30 seconds. This will fully reset the smoke alarm and drain any charge left inside.

Where is the code on a safe?

Enter your code on the keypad located on the front of the safe.

How to remove the cover from a digital keypad?

Lift the round protective cover from the digital keypad, tilting the cover upward from the base to expose the keypad.

How to contact First Alert?

Email First Alert support at [email protected] to verify availability of a combination or replacement key for your model.

What to do if you forget your safe code?

If you forget your code, you can open the safe with your emergency override key. Upon acquiring your safe, you'll first access it with the factory passcode, but you should immediately follow the steps for creating your own code. You can change the passcode as often as you wish. Open the protective keypad cover.

How many models of First Alert safes are there?

Of the 16 models of floor and wall safes offered under the First Alert name, four models are combination-accessed units, and 12 use digital access through a keypad on the front of the unit. All First Alert safes come with emergency override keys that should be kept away from the safes.

How much does it cost to replace a safe key?

There is no charge for combination recovery, but replacement keys for safes are $10.95.

How long do you have to wait to call First Alert?

Wait 48 hours before calling to confirm First Alert's receipt of your letter. Once confirmation is established, the First Alert representative will provide the combination.

How much does it cost to replace a key at First Alert?

Upon receiving confirmation that First Alert has received your letter, send the $10.95 key replacement fee (if your request is for a key). The company accepts credit cards, checks and money orders. To pay by phone, call 800-323-9005. Advertisement.

Where to store a new combination passcode?

Always make sure you've stored a record of your new combination or passcode along with the override keys in a secure, undisclosed spot away from the general location of your safe.

What is a first alert safe?

First Alert Safe is a reputable brand known for its different types of safes. The brand offers almost all types of safes for your convenience. Whether you are looking for a smart locker for your valuables at home or need a secure cash box for your business, First Alert comes with all sorts of options relating to safes.

How many keys does a first alert safe have?

Like all good safes, the First Alert safes also come with a set of two keys. You can save the other key into a safe place in case you misplace one key. Make sure you always keep both keys separate so you can go to the other key if one is misplaced.

Why is my digital lock not working?

If your digital lock is not working, then the chances are that it has a weakened battery. You should replace the battery immediately. You can use the override key for opening the lock and change the digital keypad battery so that it starts working.

Can you open a safe with an emergency key?

For most of the safes, you get an emergency key for these types of situations. Look for the emergency key, and you can open the safe with that. After removing the dial, you may find an emergency keyhole behind it. You can use that keyhole for inserting the emergency key, and the lock will open. It is important to note that not all manufacturers ...

Where is the bolt on a safe?

You can look for the bolt opening of your safe. It is located in the base of the locker or to its back. Once you find the bolt opening through which you can see the digital keypad. After you locate the bolt opening, you can take a thin rod to enter inside and reach the combination lock.

Can you put keys in a safe?

Never place the keys inside the safe as you won’t be able to use keys in an emergency. Also, never try to open the safe with hard tools. You may open the safe with a hammer or other tools, but you can damage your safe and make it useless for the future.

Can you use an emergency keyhole?

You can use that keyhole for inserting the emergency key, and the lock will open. It is important to note that not all manufacturers place the emergency keyholes behind the dial. You can contact the manufacturer or look in the papers that came safely to know where the emergency keyhole is located.