Knowledge Builders

how do you reset the heater on a hot springs spa

by Cristian Hackett Published 3 years ago Updated 2 years ago
image

How to Reset a Spa Heater

  1. Locate the spa's high-limit reset. This is a red button found on many spa packs. It may be located on the heater and covered by a rubber nipple.
  2. Press the high-limit reset button. When this button is tripped, it will "click" in when you reset it.
  3. Turn on your spa and observe its operation. If you do not have power to the spa, you may have a tripped breaker panel switch or GFCI outlet.
  4. Flip the breaker panel switch on or press the reset button on the GFCI outlet to restore power. Turn the spa on.

Part of a video titled Hot Spring Spa Parts - Heaters Identifying and Testing www ...
1:52
4:35
There's the heater button with the reset. And you have to push it. It's a rubber button it doesn'tMoreThere's the heater button with the reset. And you have to push it. It's a rubber button it doesn't feel much but you have to push it to make sure it's reset.

Does a spa heater have a reset button?

A spa heater has a high-limit reset button. A spa or hot tub provides a form of personal relaxation known as hydrotherapy. The spa's pump and heater provide a soothing environment by circulating water through jets and increasing it to the bather's desired temperature.

How do I troubleshoot my hot spring spa?

Plus, turn to your dealer for repairs by a certified technician who knows Hot Spring models inside and out. To troubleshoot an issue with your spa, locate your specific problem in the chart below to help determine a probable cause, and then apply the right solution. Do you need to call a professional technician?

How do I reset the power to my spa?

Flip the breaker panel switch on or press the reset button on the GFCI outlet to restore power. Turn the spa on.

How do you reset a hot tub with a reset button?

Press the high-limit reset button. When this button is tripped, it will "click" in when you reset it. Turn on your spa and observe its operation. If you do not have power to the spa, you may have a tripped breaker panel switch or GFCI outlet.

image

Why is my Hot Springs spa not heating?

While having a piece of equipment fail like a heater, circulating pump, or part of the control system can be the cause of your hot tub not heating, they aren't as common as you might think. The number one reason we see no heat calls is that there is a flow issue that can be easily fixed by the customer.

How do I reset my hot tub heater?

3:365:05OASIS HOT TUB & SAUNA - How To Reset Your Spa / Hot Tub HeaterYouTubeStart of suggested clipEnd of suggested clipAnd all you have to do is take your door screw. And insert it into the top membrane on the top ofMoreAnd all you have to do is take your door screw. And insert it into the top membrane on the top of the box and push. It two or three times power your spot back on using your braids.

Where is the high limit reset button on a hot springs spa?

The High Limit Switch Needs to Be Reset or Replaced Simply reset by pressing the big red button on your spa pack. The high limit switch may be housed in a thermowell. If the water temperature in the thermowell is the same as the water temperature in the rest of the spa, the switch is damaged and needs to be replaced.

How do I reset my hot springs control panel?

0:041:04How To Reset a wireless Hotspring Highlife series control panelYouTubeStart of suggested clipEnd of suggested clipAnd you got to hold it there for a little while. And it will go black on you. And then eventuallyMoreAnd you got to hold it there for a little while. And it will go black on you. And then eventually you will start seeing where it's searching for the.

Is there a reset button on a hot tub heater?

Most hot tubs are fitted with a reset button in the event of overheating or a power surge. The button is typically located on the side of the control box behind the hot tub's removable panel on the front side. Similar to disposal reset buttons, simply press the small red button in to reset it.

Where is the reset button located on a hot tub?

Locate the spa's high-limit reset. This is a red button found on many spa packs. It may be located on the heater and covered by a rubber nipple.

Is there a reset button on a hot tub motor?

There are generally two "hard resets" in hot tubs, the GFCI, and the high limit reset. The GFCI pops if there is any type of electrical short (such as water getting into the heating element, the reset on that can be in one of three places.

Why is the green light blinking on my hot springs hot tub?

The blinking green light could mean low salt, meaning you need to add more salt or the complete opposite, you have added too much salt. Another reason your green light could be blinking is because your salt cell is not receiving enough flow or is having a hard time functioning to its full potential.

How do you know if your hot tub heater is bad?

To test if a bad heater is causing your tripped breaker, you can disconnect the copper tabs (or wires) from the spa pack to the heater element. Once disconnected, turn the power back on. If the breaker stays on, you've determined that the heater is bad.

Why do you need a hot spring spa?

Hot Spring spas are designed to make it easy for you to monitor water quality, clean the filters, and protect your spa from the elements.

How do I keep my spa in tip top shape?

Follow these tips to keep your home spa in tip-top shape and to minimize the time and cost of repairs. Rinse the underside of your hot tub cover frequently with a garden hose to keep algae, mold, and mildew at bay. Rinse your filters every month to keep clear water flowing. (TRI-X ® filters are dishwasher-safe.)

How to keep hot tub from leaking oil?

Use an instant filter cleaner spray each month to break up oil and other stubborn buildup. Always keep your hot tub covered when not in use to keep debris out and to more efficiently maintain water temperature. Keep detergents and soaps out of your spa by showering with water only before getting into the hot tub.

How to remove scale from hot tub?

To remove the scale, drain the spa water, scrub off the scale, refill the spa, and balance the water. Contact your dealer for tips on how to prevent future scale buildup. Remember to exercise caution when attending to your hot tub’s mechanical and electrical parts.

How to remove scum from a spa?

Wipe the scum off with a clean rag; if the layer of scum is heavy, drain the spa and use a spa surface and tile cleaner to remove the scum before refilling the spa. Contact your dealer for cleaning recommendations and tips to prevent future buildup. Algae growth. High pH.

What causes a spa filter to be dirty?

Filters are dirty. Excessive buildup of oils and organic matter. Improper sanitation. Suspended particles or organic matter. Overused or old water. Clean the filters. Shock the spa water with sanitizer. Add sanitizer as your owner’s manual recommends; adjust the pH and/or the alkalinity to the recommended range.

How to shock water with sanitizer?

Shock the water with sanitizer and adjust the pH to recommended levels. Shock the water with sanitizer and maintain the sanitizer level. Contact your dealer for advice on how to avoid buildup of algae, mold, and mildew. Eye irritation.

What to do if your hot tub control panel is not working?

If the control panel simply seems not to be working you can check the connections to it and also see if any water has got in it which could be the problem. If all seems well then you may need to replace your control panel or consult your hot tub dealer.

How to fix a GFCI breaker on a hot tub?

How to fix a tripped GFCI circuit breaker on a hot tub. The GFCI circuit breaker on a hot tub will trip if there is an electrical fault in the hot tub. Once the circuit breaker has tripped no more electricity will reach the hot tub. If this has happened all you need to do is to switch the switch back on again.

Why does my hot tub breaker keep tripping?

Why does my hot tub’s breaker keep tripping? The hot tubs breaker trips when there is an electrical fault or short circuit in the hot tub. If the circuit breaker keeps tripping then there is a problem that’s needs sorting out. The chances are that there is some loose wiring somewhere, some moisture has got into an electrical component or something like the heating element needs replacing. If the breaker keeps tripping on a regular basis, or won’t switch back on again, then the best advice is to get a qualified hot tub engineer to come and test the hot tub to find out what the issue is.

Why does my hot tub heater cut out?

If the heater becomes too hot for whatever reason then there is a high limit switch on it and it will cut out for safety sake. If the rest of your hot tub seems to be working ok and you are sure that you have got electricity coming to it but the water is cold then the chances are that your heater has cut out.

What does it mean when a hot tub cable is damaged?

Any damage to the cable like this will mean that the control panel itself will not operate properly. Depending upon the model of your hot tub, and also the type of control panel, it should be relatively easy to change the cable and solve the problem.

Why does my hot tub overheat?

A hot tub overheats when the heating element hasn’t got a strong enough flow of water going around it to dissipate the heat that it is generating . When this happens, for safety sake, the hot tub high limit sensor will kick in and then the heating element will automatically cut out.

What does it mean when your heating element cuts out?

However, if it immediately cuts out again, or as soon as you switch it on the circuit breaker kicks in, it means that there is probably a fault with your heating element.

How do I clean a hot tub?

PROACTIVE HOT TUB MAINTENANCE TIPS THAT CAN SAVE YOU FROM FUTURE HEADACHES 1 Rinse the underside of your hot tub cover frequently with a garden hose to keep algae, mold, and mildew at bay. 2 Rinse your filters every month to keep clear water flowing. (TRI-X ® filters are dishwasher-safe.) 3 Use an instant filter cleaner spray each month to break up oil and other stubborn buildup. 4 Always keep your hot tub covered when not in use to keep debris out and to more efficiently maintain water temperature. 5 Keep detergents and soaps out of your spa by showering with water only before getting into the hot tub. 6 Drain and refill the hot tub as recommended in your owner’s manual to keep your water fresh. 7 Use only the chemicals and cleaners your dealer recommends for your hot tub model. Pool chemicals and other products can throw off your water balance and lead to damage down the road. 8 Purchase authorized Hot Spring parts from your dealer to ensure that you’re outfitting your spa with quality, lasting components. 9 Keep your spa’s serial number on hand in case you need to reference it for more troubleshooting advice or official parts and repairs.

Why do you need a hot spring spa?

Hot Spring spas are designed to make it easy for you to monitor water quality, clean the filters, and protect your spa from the elements.

How do I keep my spa in tip top shape?

Follow these tips to keep your home spa in tip-top shape and to minimize the time and cost of repairs. Rinse the underside of your hot tub cover frequently with a garden hose to keep algae, mold, and mildew at bay. Rinse your filters every month to keep clear water flowing. (TRI-X ® filters are dishwasher-safe.)

How to remove scum from a spa?

Wipe the scum off with a clean rag; if the layer of scum is heavy, drain the spa and use a spa surface and tile cleaner to remove the scum before refilling the spa. Contact your dealer for cleaning recommendations and tips to prevent future buildup. Algae growth. High pH.

What causes a spa filter to be dirty?

Filters are dirty. Excessive buildup of oils and organic matter. Improper sanitation. Suspended particles or organic matter. Overused or old water. Clean the filters. Shock the spa water with sanitizer. Add sanitizer as your owner’s manual recommends; adjust the pH and/or the alkalinity to the recommended range.

How to remove scale from hot tub?

To remove the scale, drain the spa water, scrub off the scale, refill the spa, and balance the water. Contact your dealer for tips on how to prevent future scale buildup. Remember to exercise caution when attending to your hot tub’s mechanical and electrical parts.

How to keep hot tub from leaking oil?

Use an instant filter cleaner spray each month to break up oil and other stubborn buildup. Always keep your hot tub covered when not in use to keep debris out and to more efficiently maintain water temperature. Keep detergents and soaps out of your spa by showering with water only before getting into the hot tub.

image

1.Videos of How Do You Reset The Heater On a Hot Springs Spa

Url:/videos/search?q=how+do+you+reset+the+heater+on+a+hot+springs+spa&qpvt=how+do+you+reset+the+heater+on+a+hot+springs+spa&FORM=VDRE

25 hours ago  · If the spa is overheating, you can reset the heater by pressing the high limit switch. It may be mounted on the heater or has a capillary tube that senses water temperature. Typically, a spa’s high limit switch is located in the THERMOWELL. If it’s not, you can try pressing the large red button on the spa pack.

2.How to Reset a Spa Heater | Hunker

Url:https://www.hunker.com/13418150/how-to-reset-a-spa-heater

22 hours ago Flip the breaker panel switch on or press the reset button on the GFCI outlet to restore power. Turn the spa on. If the spa trips or stops working the second that heat demand is present, the heater element is probably the cause. You will need to replace the heater element.

3.Fix Your Hot Tub with This Complete Troubleshooting Guide

Url:https://www.hotspring.com/hot-tubs-101/Fix-Your-Hot-Tub-with-This-Complete-Troubleshooting-Guide

6 hours ago  · http://www.hottubspasupplies.com914-237-5606orders@hottubspasupplies.com

4.Hot Spring Spa Not heating or no bubbles - YouTube

Url:https://www.youtube.com/watch?v=mEc7JiVXsis

23 hours ago Beside this, how do I reset my hot tub heater? How to Reset a Spa Heater. Locate the spa's high-limit reset. This is a red button found on many spa packs. Press the high-limit reset button. Turn on your spa and observe its operation. Flip the breaker panel switch on or press the reset button on the GFCI outlet to restore power.

5.How Do I Reset My Hot Tub Control Panel? - Hot Tub Focus

Url:https://www.hottubfocus.com/reset-hot-tub-control-panel/

9 hours ago

6.Replacing a Hot Spring no fault Heater - YouTube

Url:https://www.youtube.com/watch?v=-BtTcCuD-Qo

33 hours ago

7.Hot Tub Troubleshooting - My Hot Spring

Url:https://www.myhotspring.com/pages/hot-tub-troubleshooting

8 hours ago

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9