how do you reset the oil life on a 2011 ford taurus

Oil Change Light Reset Ford Taurus 2008 2009 2010 2011 2012 Procedure

1. Turn the ignition to the “RUN” position.
2. Press the “SETUP”, “OIL LIFE % HOLD RESET = NEW” will be displayed.
3. Press and hold “RESET” button for 2 seconds to reset to 100% and “OIL LIFE SET TO 100%” will be displayed.
4. Turn the ignition off.

Full Answer

How do you reset the oil life on a Ford Explorer?

Press the SETUP button repeatedly until you see “OIL LIFE =% HOLD RESET = NEW” The button is located on the instrument panel or on the center console Press and hold the RESET button until “OIL LIFE SET TO 100%” is displayed It will reset your oil life monitor and turn the change oil soon reading off

When to reset the oil change required light on a Ford Taurus?

If the engine oil life is less than 10%, the Oil Change Required Light will appear on the display. The engine oil life interval must be reset after performed the maintenance service on your vehicle. Follow the instructions below to reset the Oil Change Required Light on your Ford Taurus:

How do I reset the oil life to 100%?

Press and release the SETUP button to display “Oil Life XXX% Hold Reset = New” Press and hold the RESET button for 2 seconds and release to reset oil life to 100%.

How do you reset the oil life on a Toyota Corolla?

Underneath the steering wheel, you’re gonna see these buttons. So press the SETUP and you can switch through the menu and brings up to the OIL LIFE =% HOLD RESET = NEW To reset it I just hold down the RESET button until it goes to 100% and then let it go

How do you reset the oil life on 2010 Ford Taurus?

0:050:56How to Reset the Oil Life on a 2010-2012 Ford Taurus - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust hit setup once twice it'll go to oil life. And then at that point just hold down the resetMoreJust hit setup once twice it'll go to oil life. And then at that point just hold down the reset button until it goes to 100 and then let it go and that does it.

How do you reset the oil life on a 2011 Ford Focus?

0:052:00Ford Focus oil light reset 3rd Gen. (2011-2018) - YouTubeYouTubeStart of suggested clipEnd of suggested clipRight when the oil maintenance light comes up you want to hold the brake and the gas pedal all theMoreRight when the oil maintenance light comes up you want to hold the brake and the gas pedal all the way down. You want to hold it there then a message will come up right there oil reset in progress.

How do you reset the oil gauge on a 2011 Ford Edge?

How to Reset Oil Life: Ford Edge 2011-2015Turn the ignition to ON.Use the directional pad on the steering wheel and scroll through the settings area under the heading menu.3.Go to Settings > Vehicle > Oil Life Reset.4.Push and hold OK until it resets to 100%More items...

What type of oil does a 2011 Ford Taurus SEL take?

Mobil 1 - Extended Performance High Mileage 5W-20 Full Synthetic Motor Oil, 5 Quart (Part No. 15020)

How do you reset the oil change light on a Ford?

0:181:29HOW TO: Reset Oil Change Message - (ALL 2011 to 2021 Fords) - YouTubeYouTubeStart of suggested clipEnd of suggested clipDown for about 20 seconds so just keep holding the gas to the floor and the brake to the floor 20MoreDown for about 20 seconds so just keep holding the gas to the floor and the brake to the floor 20 seconds resets in progress. Then after about 20 seconds it'll be complete.

How do you reset the oil change light?

Oil Change Indicator ResetSwitch the ignition on. ... Fully press the accelerator and brake pedals at the same time.Keep the accelerator and brake pedals fully pressed.After three seconds, a message displays confirming the reset procedure is in progress.More items...

Why is my change oil light on when I just changed my oil?

The final common cause of an illuminated oil light, even after an oil change, is probably the most problematic. The oil pump may not be circulating enough oil to keep the engine's parts lubricated and functioning properly, which can in turn cause multiple engine issues.

How do you reset the oil change light on a 2011 Ford f150?

0:001:062011 F150 Oil Reset Procedure - YouTubeYouTubeStart of suggested clipEnd of suggested clipGood enough for me. So yeah basically you're gonna tap set up it's going to say reset for systemMoreGood enough for me. So yeah basically you're gonna tap set up it's going to say reset for system check you tap set up one more time. And it will say oil life whatever percent hold reset equals new.

What is Ford Intelligent oil life monitor?

The available Intelligent Oil-Life Monitor calculates oil change service intervals based on vehicle use, operating conditions, and time since last oil service. The Intelligent Oil-Life Monitor must be reset after each oil change.

How much oil does a 2011 Ford Taurus SEL take?

5.5 quartsThe 2011 Ford Taurus is powered by a 263-horsepower, 3.5-liter V6 engine. This powerful engine has an oil capacity of 5.5 quarts (5.2 liters).

How many quarts of oil go in a 2011 Ford Taurus?

5.5 quartsEngine Oil With filter 5.5 quarts. After refill check oil level.

How many quarts of oil does a Ford Taurus take?

Capacity: With filter 6 quarts. After refill check oil level.

How do you turn off the change oil light on a Ford Focus?

0:411:57How To Reset The Oil Change Required Light On A Ford Focus Mk ...YouTubeStart of suggested clipEnd of suggested clipAnd it should reset. It see we say in progress keep holding the brake. And the accelerator pedal andMoreAnd it should reset. It see we say in progress keep holding the brake. And the accelerator pedal and the engine isn't running of course. It'll take um around a few seconds to just reset.

How do you reset the oil light on a 2011 Ford Fiesta?

1:063:152010-2012 ford fiesta oil life reset-JOETHEAUTOGUY - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe're going to do is you're going to hold the gas and brake for about 20 seconds. Just count toMoreWe're going to do is you're going to hold the gas and brake for about 20 seconds. Just count to twenty one -. Yeah now you just hold it that's all you do. If you're in indicator.

How do you reset the oil change light on a 2010 Ford Focus?

0:000:27How To Reset Ford Focus Oil Light - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhat you need to do is put the key on the on position without starting the car hold the brake downMoreWhat you need to do is put the key on the on position without starting the car hold the brake down and accelerator pedal down to the floor. The 20 seconds and your life should be set.

How do you reset the maintenance light on a 2010 Ford Focus?

0:000:56How to reset the Service light on a Ford Focus - YouTubeYouTubeStart of suggested clipEnd of suggested clipOff i need to turn the ignition on to stage. Two it puts the lights on there and press and hold theMoreOff i need to turn the ignition on to stage. Two it puts the lights on there and press and hold the accelerator. And the brake at the same. Time. Keep both pedals depressed.

How to reset oil life to 100%?

Press and hold “RESET” button for 2 seconds to reset to 100% and “OIL LIFE SET TO 100%” will be displayed.

When did the Taurus stop being made?

In the late 1990s and early 2000s, sales of the Taurus declined as it lost market share to Japanese midsize sedans and as Ford shifted resources towards developing SUVs. The Taurus was withdrawn after the 2007 model year, with production ending on October 27, 2006. As part of a model line revision, the Taurus and the larger Ford Crown Victoria were to be replaced with the full-size Five Hundred and mid-size Fusion sedans; the Taurus station wagon would be replaced with the Ford Freestyle wagon, branded as a crossover SUV. During the 2007 Chicago Auto Show, Ford revived the Taurus and Sable nameplates, intended as 2008 mid-cycle revisions of the Ford Five Hundred; the Freestyle was renamed the Ford Taurus X. For the 2010 model year, Ford introduced the sixth-generation Taurus, marking a more substantial model update, alongside the revival of the Taurus SHO; in 2013, the Ford Police Interceptor Sedan was introduced as a successor for its long-running Crown Victoria counterpart.

When was the Ford Taurus made?

The Ford Taurus is an automobile that was manufactured by the Ford Motor Company in the United States from the 1986 to 2019 model years. Introduced in late 1985 for the 1986 model year, six generations were produced over 34 years; a brief hiatus was undertaken between 2006 and 2007. From the 1986 to 2009 model years, the Taurus was sold alongside its near-twin, the Mercury Sable; four generations of the high-performance Ford Taurus SHO were produced (1989–1999; 2010–2019). The Taurus also served as the basis for the first-ever front-wheel drive Lincoln Continental (1988–2002).

Is the Taurus a full size car?

Initially built on the DN5 platform (renamed the DN101 platform in 1995 and the D186 platform in 1999), the Taurus became a full-size car in 2007, adopting the Volvo-derived D3 platform, offering front or all-wheel drive. The Taurus was produced as a four-door sedan through its entire production, with a five-door hatchback station wagon offered from 1986 to 2005.

Oil Viscosity and Capacity

The 3.5 liter engine holds approximately 5.5 quarts (5.2 liters) of 5W-20 oil when the engine oil and filter are changed.

Not Working?

If the oil change light reset procedure is not working to reset your oil life monitor, make sure you are following each of the steps exactly and in the order displayed in the Oil Change Light Reset Ford Taurus 2008 2009 2010 2011 2012 procedure above.

Oil Life Monitor Reset Procedure Frequently Asked Questions

If you are still having trouble with visit the Oil Life Monitor Reset Procedure Frequently Asked Questions (FAQ) page for more information.