Knowledge Builders

how do you reset the oil light on a 2010 honda crv

by Jaime Trantow Published 2 years ago Updated 1 year ago
image

Oil Change Light Reset Honda CR-V 2010 2011 Procedure

  1. Turn the ignition to the “RUN” position.
  2. Press the “SELECT/RESET” knob until the engine life indicator is displayed.
  3. Press the “SELECT/RESET” knob for more than 10 seconds, the indicator and the maintenance code (s) will blink.
  4. Press the “SELECT/ RESET” knob for 5 more seconds, the maintenance code (s) will disappear and oil life will be reset to 100.
  5. Turn the ignition off.

Full Answer

How do you reset the engine oil life on a Honda CRV?

Turn the ignition to the first position. Do not start the engine. Press the “Trip” stem to toggle it to show “Engine Oil Life“. Press and hold the “Trip” stem for about 10 seconds until the display starts blinking. Once blinking, release the “Trip” stem. Turn/twist the “Trip” step to choose the “Reset” option.

How do you reset the engine oil life indicator?

You’ll need to reset the Engine Oil Life indicator when you change the oil. Here’s how it is done. Turn the ignition to the first position. Do not start the engine. Press the “ Trip ” stem to toggle it to show “ Engine Oil Life “. Press and hold the “ Trip ” stem for about 10 seconds until the display starts blinking.

How do you reset the oil life on a Chevy Silverado?

Press the “SELECT/ RESET” knob for 5 more seconds, the maintenance code (s) will disappear and oil life will be reset to 100. Turn the ignition off. The 2.4 liter engine holds approximately 4.4 quarts (4.2 liters) of 0W-20 oil when the engine oil and filter are changed.

How do I reset the oil life on my Toyota Corolla?

Press “ Enter ” to select “ Maintenance Minder ” (wrench icon). Press and hold “ Enter ” for about 10 seconds until it enters Reset Mode. Scroll to “ Engine Oil Life “, then press “ Enter “. From the Home screen, choose “ Settings ” > “ Vehicle ” > “ Maintenance Info ” > “ Select Reset Items ” > “ Engine Oil Life ”

See more

image

How do I reset the oil life on my 2010 Honda CRV?

7:0710:192010 HONDA CRV OIL CHANGE - RESET INDICATOR LIGHT - YouTubeYouTubeStart of suggested clipEnd of suggested clipOn. If the oil life wasn't showing we would just press this button until it was then we're going toMoreOn. If the oil life wasn't showing we would just press this button until it was then we're going to push it and hold it for about 10 seconds. Wait till it starts blinking.

How do I reset my oil light on my Honda CRV?

If your display reads “Engine Oil Life”, select the Reset mode by pressing the Info button on the steering wheel. Then press the Select/Reset button to return your oil life to 100%. If your display reads “Engine Oil Indicator %”, press and hold the Select/Reset knob for more than 5 seconds.

How do you reset the wrench light on a 2010 Honda CRV?

0:472:27MAINT REQD Light HONDA - Service Wrench Light reset - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo ignition on don't start the car push and hold that route set reset button for 10 seconds. Now youMoreSo ignition on don't start the car push and hold that route set reset button for 10 seconds. Now you see the oil life and the cancel is the one that's blinking.

How do you reset the oil life on a 2010 Honda?

0:001:18How to reset the oil life on a 2010 Honda Accord - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress it and release until the oil life index. Comes up the percentage. Then you press and you holdMorePress it and release until the oil life index. Comes up the percentage. Then you press and you hold that button down and you hold it until that oil life percentage starts to flash.

How do you reset the oil light on a 2011 Honda CRV?

0:141:27How to reset oil change reminder on 2007 - 2011 Honda CRV - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress and hold the reset button until the to reset options appear. You now you will want to turn theMorePress and hold the reset button until the to reset options appear. You now you will want to turn the reset knob to highlight oil life and then press it again to confirm.

How do you reset the oil light on a 2009 Honda CRV?

0:091:11Honda CRV 2007-2011 Reset Oil Life Indicator - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou're going to scroll with the same button just to the right now it's going to start flashing theMoreYou're going to scroll with the same button just to the right now it's going to start flashing the oil light. Now you're going to hold that down for just about 5 seconds.

What does the wrench light mean on a 2010 Honda CR V?

Maintenance Minder systemThe lighted wrench is part of your Honda CR-V's Maintenance Minder system, which notifies you when your Honda needs service so you have time to schedule a service appointment.

What is the wrench symbol on Honda CRV?

Maintenance Minder™Maintenance Minder™: The Maintenance Minder™ indicator light is a yellow wrench. It comes on when your car is due for routine service, and it will disappear after the necessary maintenance is performed.

How do I turn off the wrench light on my Honda?

2:013:07What does the Yellow Wrench Light Mean and how to clear it? (Honda ...YouTubeStart of suggested clipEnd of suggested clipAnd you need to reset that light all you have to do is put your engine to the on. Position. And thenMoreAnd you need to reset that light all you have to do is put your engine to the on. Position. And then make sure this thing is showing. What you want to do is press it for about 10 seconds.

How do you reset the maintenance required light on a 2010 Honda Civic?

0:001:04Reset Oil Maintenance Light - 2010 to 2012 Honda Civic - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll right there you go start slashing let go the button. Then hold down the select reset buttonMoreAll right there you go start slashing let go the button. Then hold down the select reset button again and it's going to flash or life a hundred percent. And that's it you reset your oil life um.

How do I reset my oil life?

Oil Change Indicator ResetSwitch the ignition on. ... Fully press the accelerator and brake pedals at the same time.Keep the accelerator and brake pedals fully pressed.After three seconds, a message displays confirming the reset procedure is in progress.More items...

How do you reset the oil life on a Honda?

Press and hold the “Select/Reset” button for 10 seconds. The Engine Oil Indicator light will begin to blink. If your display reads “Engine Oil Life,” select the Reset mode by pressing the Info button on the steering wheel. Then press the “Select/Reset” button to return your oil life to 100%.

How do you reset the oil life on a 2012 Honda CRV?

0:080:55How to reset oil life Honda CRV 2012 2013 2014 2015 2016 - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou'll see it right there you're gonna want to hold it for a few seconds until it blinks. Ten or soMoreYou'll see it right there you're gonna want to hold it for a few seconds until it blinks. Ten or so seconds. There we go it's gonna blink let go. Hold it again.

How do you reset the oil life on a 2015 Honda CRV?

0:151:542015 Honda CR-V - Maintenance Reset Procedure - Oil Life ResetYouTubeStart of suggested clipEnd of suggested clipAnd using the reset button up here in the corner. You'll scroll through until you get to the oilMoreAnd using the reset button up here in the corner. You'll scroll through until you get to the oil life percentage. You'll then press and hold this button.

How do you reset the oil life on a 2007 Honda CRV?

0:161:54How to Reset Oil Light 07-11 Honda CR-V - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd what we're gonna do is that same button we're going to twist it right now the cancel button isMoreAnd what we're gonna do is that same button we're going to twist it right now the cancel button is flashing twist it to the right it's going to bring us to the temperature.

How do you reset the oil life on a 2016 Honda CRV?

0:061:16Honda CRV 2016- Service Light Reset / Maintenance Oil Life ResetYouTubeStart of suggested clipEnd of suggested clipOnce in that menu you want to press and hold the enter button for around ten to fifteen seconds.MoreOnce in that menu you want to press and hold the enter button for around ten to fifteen seconds. Until a menu appears which asks you what you want to reset.

2010 Honda Crv Oil Life Reset Steps

Ideally after traveling every 5000 miles, you need to perform an oil change (also called service) so the light comes on. Be sure to go through your car owner’s manual to be sure of what the light looks like on the dashboard.

Engine Type Oil Viscosity and Capacity

This is a tabular representation of 2010 Honda Crv oil viscosity and capacity detailed information and it is important to know this as it will help in knowing the exact oil for your vehicle. This info. Comes in handy before and after 2010 Honda Crv oil change reset.

What is the oil life indicator on a Honda CRV?

The oil life feature is one of those areas. The oil life indicator is a key component on many newer vehicles, including the latest models of the Honda CRV. In these vehicles, this indicator tells you the quality of the oil. It gives you an estimate as to when you need to replace the oil.

Why is oil good for a Honda CRV?

One of the key reasons to keep the oil in good condition is because of fuel economy. When the engine is not working at its optimal level, that can drop your fuel economy. Here’s the good thing: The 2020 Honda CRV has one of the best fuel economies in its class.

Can you reset your oil when topping up?

You shouldn’t go through this process unless your vehicle just received new oil. Even if you are just topping up the oil in the engine, do not reset this.

What does the oil life on a Honda CRV mean?

The Honda CRV has a feature that shows you the Engine Oil Life. It is shown as a percentage. The higher the percentage number, the more Engine Oil Life you have left.

How to reset oil life on a sandbox?

Press and hold the “ Trip ” stem again, this time for 5 seconds . The Oil Life will reset to 100%.

Why is my maintenance light still on after the oil change?

Incases your maintenance light is still on even after you have changed the oil, you should look for the other issues that may affect your engine.

Does the technology and build of my Honda CRV increase the maintenance costs?

No, there is no significant difference in the maintenance costs for the Honda CRV with high- tech features or additional packages.

Is it very expensive to maintain a Honda CR-V?

How often your Honda CR-V requires maintenance depends on how you use it.

Is it good to drive my Honda CR-V with the maintenance light ON?

No, it is not recommended to continue driving with the maintenance light on.

image

1.Videos of How Do You Reset The oil Light on A 2010 Honda CRV

Url:/videos/search?q=how+do+you+reset+the+oil+light+on+a+2010+honda+crv&qpvt=how+do+you+reset+the+oil+light+on+a+2010+honda+crv&FORM=VDRE

25 hours ago Oil Change Light Reset Honda CR-V 2010 2011 Procedure. Turn the ignition to the “RUN” position. Press the “SELECT/RESET” knob until the engine life indicator is displayed. Press the “SELECT/RESET” knob for more than 10 seconds, the indicator and the …

2.Oil Change Light Reset Honda CR-V 2010 2011

Url:https://resetoillight.com/honda/oil-change-light-reset-honda-cr-v-2010-2011/

25 hours ago  · Press the “SELECT/RESET” knob for more than 10 seconds, and the indicator and the maintenance code (s) will blink. Press the “SELECT/ RESET” knob for 5 more seconds, the …

3.2010 Honda Crv Oil Life Reset - Cookip

Url:https://cookip.com/2010-honda-crv-oil-life-reset/

28 hours ago  · 2010 Honda CRV oil reset. 28,626 views Sep 24, 2018 Key on engine on or off. Press until the oil life % show. Press and hold til it blinks. Turn the nob to reset and press …

4.2010 Honda CRV oil reset - YouTube

Url:https://www.youtube.com/watch?v=9V03uApRVyQ

7 hours ago  · Press the “ Trip ” stem to toggle it to show “ Engine Oil Life “. Press and hold the “ Trip ” stem for about 10 seconds until the display starts blinking. Once blinking, release …

5.2010 HONDA CR-V OIL CHANGE AND OIL LIGHT …

Url:https://www.youtube.com/watch?v=svMWPM_t6-g

35 hours ago  · 2002-2006 Honda CR-V Wrench Light Reset Procedure. With vehicle off, hold in the RESET button on the dash. While you’re holding it in you’re going to turn the car on …

6.How to Reset the Oil Life Monitor in a Honda CR-V

Url:https://www.vehiclehistory.com/articles/how-to-reset-the-oil-life-monitor-in-a-honda-cr-v

31 hours ago How do you reset the oil life on a 2010 Honda CRV? Option 1 Turn the ignition to the first position. Press the “Trip” stem to toggle it to show “Engine Oil Life“. Press and hold the “Trip” …

7.Honda CRV: How to Reset Oil Life - HiRide

Url:https://hiride.com/honda-crv-reset-engine-oil-life/

3 hours ago  · Select “OIL LIFE” by turning the Select/Reset knob one click to highlight “OIL LIFE”, then press the Select/Reset knob to enter the reset mode. The engine oil life …

8.How To Reset The Maintenance Light On A Honda CRV

Url:https://fourwheeltrends.com/how-to-reset-the-maintenance-light-on-a-honda-crv/

1 hours ago  · You will notice that the engine oil indicator will start flashing. If your dashboard displays “Engine Oil Life,” push the more info button on the steering wheel to enter the …

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9