The service light on your John Deere D140 is a warning for when your machine needs to be serviced. You can reset it by holding the SELECT button for 5 seconds. Then, you can clear the service light by pressing the key to the “run” position.
How do you reset the service timer on a John Deere L130?
Reset The Service Timer On A John Deere L130 Drive your John Deere L130 to a flat area in the lawn or on a driveway. Move the throttle lever to slow, and allow the engine to run at a slow idle for a few seconds. Leave the key in this position for two hours, then turn the ignition key to the "Stop" position and remove the key.
How do you service a John Deere lawn mower?
Move the throttle lever to slow, and allow the engine to run at a slow idle for a few seconds. Leave the key in this position for two hours, then turn the ignition key to the "Stop" position and remove the key. Service the engine and/or mower deck as described in the owner's manual specific to your tractor model.
How do you start a John Deere L130 with a key?
Drive your John Deere L130 to a flat area in the lawn or on a driveway. Move the throttle lever to slow, and allow the engine to run at a slow idle for a few seconds. Leave the key in this position for two hours, then turn the ignition key to the "Stop" position and remove the key.
How long does it take for John Deere service reminders to activate?
Both the engine and mower deck service reminders will activate after 100 hours of use. Unlike automobiles, which alert you that service is necessary after a certain amount of miles, John Deere lawn tractors alert you about upcoming service after the engine has been in use for a certain amount of time.
Why is my John Deere flashing SVC?
If an arrow with "SVC" has appeared in the lower left-hand corner, pointing to the left, the computer is alerting you that engine service will be necessary soon. A similar arrow will appear in the lower right-hand corner, pointing to the right, if mower deck service is necessary soon.
How much oil does a John Deere D140 take?
John Deere D140 EngineEngine OilOil capacity2 qts 1.9 L1 more row•Jul 5, 2022
How many hours should you have before changing the oil on a John Deere riding mower?
John Deere recommends you check your oil level before each use and to change your oil once a season. That's about every 50 hours of lawn tractor use.
How do you reset the service interval on a John Deere 6125m?
MemberPress the menu button.Select Performance Monitor.Select Performance Monitor Settings softkey.At Performance Monitor page go to Service Alarm Interval box, and select it.Adjust service interval [If using thumb wheel, rotate thumb wheel forward or rearward to change hour setting displayed.] .More items...•
What kind of oil does a John Deere D140 use?
John Deere prefers that 10W-30 be used in all its gasoline-powered engines, including those on riding mowers.
What year did John Deere Make D140?
John Deere D140 is a member of the D100 series and follows the D130. It was manufactured between 2011 and 2017. It was produced from 2011 to 2012 in its original form before a modification in 2013 occurred.
How often should you change the oil in a John Deere tractor?
Change Oil and Filter after every 250 hours, if conditions are not met. Replace after every 1500 hours, or 2 years, or as required, or with Engine Primary Air Filter, whichever occurs first. Never clean.
How often should you change John Deere oil filter?
Replace after every 500 hours or annually. (Interval can vary according to operating conditions.) Initial oil and filter change at 100 hours and then after every 250 hours. Scheduled interval of 250 hours can be extended to 375 hours if John Deere Plus-50 oil and John Deere filter are used.
How often should lawn mower spark plugs be changed?
For standard lawn mower and small engine maintenance, you should check and/or replace spark plugs: once a season. every 25 hours of use.
How do I reset my John Deere service reminder?
Turn the ignition key to the "Run" position, but do not start the engine. Leave the key in this position for two hours, then turn the ignition key to the "Stop" position and remove the key. The service timer will reset and come on when the next service interval is reached.
How much oil does a John Deere lawn mower take?
All John Deere mowers with gas engines take 10W30 oil. Any diesel mower engines will take 15W40 oil. You'll need about two quarts of oil every time you do this service.
Is SAE 30 the same as 10W30?
10w30 is thinner than SAE 30. The “30” means that it has the same viscosity as the other when the engine is hot. However, since it is thinner, it will never become as thick as SAE 30 when it gets cold. 10w30 has a viscosity of 10w which means it will start moving and protecting engine parts at a colder temperature.
Can I use 5W30 instead of 10W30 in my lawn mower?
Yes! We have modified our engine oil recommendations to state that you may now use a synthetic 5W30 (100074WEB) or 10W30 oil in all temperature ranges.
How much is a John Deere D140?
The price of the new lawn mover tractor John Deere D140 is $ 1,999.00 USD.
How to drive a John Deere L130?
Drive your John Deere L130 to a flat area in the lawn or on a driveway. Move the throttle lever to slow, and allow the engine to run at a slow idle for a few seconds. Leave the key in this position for two hours, then turn the ignition key to the "Stop" position and remove the key. Service the engine and/or mower deck as described in ...
How does John Deere service work?
Unlike automobiles, which alert you that service is necessary after a certain amount of miles, John Deere lawn tractors alert you about upcoming service after the engine has been in use for a certain amount of time. The indicator turns on a certain amount of engine time before the required service time and turns off after that same amount of time has passed after the interval. The length of time varies by model. However, there is no way to manually turn off, or reset, the service reminder. It turns off automatically. There are ways to use the indicator to monitor and prepare for upcoming service needs to keep your tractor running longer.
How to tell if mower deck service is necessary?
Look at the hour meter. If an arrow with "SVC" has appeared in the lower left-hand corner, pointing to the left, the computer is alerting you that engine service will be necessary soon . A similar arrow will appear in the lower right-hand corner, pointing to the right, if mower deck service is necessary soon. Depending on your tractor model, the hourglass will appear either 30 minutes or one hour before the necessary service time. Both the engine and mower deck service reminders will activate after 100 hours of use.
How long does it take to get an hourglass on a tractor?
Depending on your tractor model, the hourglass will appear either 30 minutes or one hour before the necessary service time. Service the engine and/or mower deck as described in the owner's manual specific to your tractor model.