You connect the combined turn/brake wires on the input side and then the output side has separate wires for each turn signal and a dedicated brake light wire. The combined right turn/brake wire goes to the green wire on the input side and the left turn/brake goes to the yellow.
What wire goes to the brake lights on a trailer?
What is the difference between a 4 way trailer connector and a 7 way trailer connector?
What is the number for a taillight converter?
Do you need a 5th wheel hitch in a short bed truck?
See 1 more
About this website
Converting Separate Turn Signals and Brake Lights to Combined Turn and ...
Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead (433 reviews)
Converting Separate Turn Signals and Brake Lights on a Motor Home to ...
I will be happy to help you out. The separate brake light circuit is going to have to be combined with the turn signals in order to use a light kit with a 4-Pole connector.
How to wire trailer turn signals separate from brakes/lights
I am putting new LED lights on my trailer, and have been looking into putting amber and red lights on it. Is there any way to wire the amber lights so they would only flash with the turn signals, and not come on with the brakes/running lights? I assume I might have to tap into the vehicle TS to...
What wire goes to the brake lights on a trailer?
On the output side that will go to the trailer lights, you will have the yellow wire, which will now be left turn only, the green wire for right turn only, and a red wire for brake lights only. Note that the running light wire is not involved at all. expert reply by: Michael H.
What is the difference between a 4 way trailer connector and a 7 way trailer connector?
What is the Difference Between a 4-Way and 7-Way Trailer Connector A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer… view full answer...
What is the number for a taillight converter?
On the trailer side, behind the 7-Way, you will attach the Vehicle to Vehicle Taillight Converter, # 118158.
Do you need a 5th wheel hitch in a short bed truck?
Do I Have to Have a Sliding 5th Wheel Hitch in a Short Bed Truck You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to… view full answer...
What is the only trailer plug that has separate circuits for the brake and turn signals?
Correct...the only trailer plug I've ever seen that had separate circuits for the brake and the turn signals is the 7-way round plug that semi tractor-trailers use. The 7-way "flat" RV plug uses one circuit for the left side brake/turn and a second circuit for the right side brake/turn.
Which cars use amber turns?
Most European cars and trucks use the separate amber turns, and some of the Ford Rangers and most of the Explorers used the amber turn system.
Does the third brake light come off the pedal switch?
The third brakelight wiring does come directly off the pedal switch. This would work, you are just ditching the amber colored lenses idea which would make it easier.
Can you tap individual signals from trailer wiring?
You oughta be able to tap individual signals from the trailer wiring.
Do you need a combined wiring for a trailer?
But someone said something about trailers, and that brings up another point; If you are going to tow with this truck, you need the conventional combined wiring since that's how most trailers are wired.
Can you make custom stop lights for motorcycles?
It's been a while but I have made custom stop/turn signal lights for motorcycles using a trailer light controller.
Do you need to tap off the wires going to the front turn signals?
I think, if you want dedicated turn signals, you'll need to tap off the wires going to the front turn signals, unless you can find the junction point (I don't know if it's a control box or how that works) where the rear turn signal and brake functions are integrated into one circuit going to the back of the truck.
What is the difference between a 4 way trailer connector and a 7 way trailer connector?
What is the Difference Between a 4-Way and 7-Way Trailer Connector A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer… view full answer...
What is the RM-732?
The converter you can use is # RM-732. This takes the separate turn and brake signals and makes them a combined circuit. When you hit the brakes with the turn signal on, it should blink on one side and the other side will remain a solid brake light.
When do you need to remove the converter on a trailer?
The converter will need to be installed after the the connector on the trailer side . When you are ready to use separate turn signals you will need to remove the converter to allow the turn signals and brake lights to be separate again.
Do you need a 5th wheel hitch in a short bed truck?
Do I Have to Have a Sliding 5th Wheel Hitch in a Short Bed Truck You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to… view full answer...
Gambi80 Medium Load Member
Bought a shiny tail light deal bracket doo-dad from iowa80 the other day. It has 4-4" lights on it, so I could have 2 brake lights and 2 turn signals...seperate from eachother........or so I thought.
Gambi80 Medium Load Member
Gah...I didn't want to have to do some major surgery. I'll finger somethin out I guess.
JohnP3 Road Train Member
What you want to do is run a separate 7 wire to the tail lights, you can just piggy back off the trailer wiring and rewire to how ever you wish. I had a customer that had a sequence set up that he had on a 8 light tail light set up so they blinked like an old FORD.
Brickhauler Medium Load Member
On the firewall under the hood, drivers side down low there is a plastic cover that hides the various harnesses that come out of the cab. You could do some creative rewiring there with the trailer harness and the tractor taillight harness. At least that way you won't be running new wires all the way from one end of the truck to the other.
Gambi80 Medium Load Member
I should have the back up beeper I've got now though...I' d hate to back over a half drunk or half baked laborer at a jobsite some day...
truckbiz Light Load Member
It's been a long time since I worked on a problem like this, but I think the wireing that causes the brake lite and the stop lite to use the same filiment is in the turn signal switch. On a 378, on the steering column.
Gambi80 Medium Load Member
There are 5 wires back there now...park, left turn, right turn, reverse and one that's got nothing. Maybe I'll have to activate the dead one somehow.
Redarc Tow-Pro Elite Trailer Brake Controller - 2 Braking Modes - 1 to 3 Axles - Proportional
Mount the control knob of this proportional controller on your dash and set up the main unit in an out-of-the-way spot. Unit works no matter its positioning. User-controlled mode is great for all types of terrain in all types of weather....
Roadmaster Brake -Lite Relay Kit for Towed Vehicles
Relay works with your tow bar wiring system to ensure that your towed vehicle's turn signal lights flash in tandem with your RV's lights.... lights. Does your towed car have separate brake lights and turn signals? No - Your towed car has a combined lighting system. You will need a brake light relay. Yes - Your towed car has a separate lighting ...
Roadmaster Universal Hy-Power Diode Wiring Kit - RM-154
Diode Kit allows you to use your vehicle's tail lights and wiring system while preventing feedback from your RV. 4-Pole flat loop included to connect RV to towed car.... ) can be purchased instead if you want to retain separate turn and brake signals.
Demco Kar Kaddy SS Tow Dolly with Disc Brakes - Foldable - 4,800 lbs
Tow your vehicle without installing a tow bar or base plates. This galvanized tow dolly features hydraulic disc brakes for safe, controlled stopping and folding ramps for compact storage. Fits towed ...
Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord - RM-152-98146-7
This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and wire your car to operate as a combined ...
Curt Spectrum Trailer Brake Controller - 1 to 4 Axles - Proportional - Dash Mount
Proportional brake controller installs anywhere in your cab and at any orientation. User-friendly, dash-mounted control knob with 10 tri-color LEDs creates a clean, OEM look. Easily adjust braking ...
Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Wire Hybrid Cord - RM-152-1676-7
Perfect for tow bars with built-in channels, this complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback ...
What wire goes to the brake lights on a trailer?
On the output side that will go to the trailer lights, you will have the yellow wire, which will now be left turn only, the green wire for right turn only, and a red wire for brake lights only. Note that the running light wire is not involved at all. expert reply by: Michael H.
What is the difference between a 4 way trailer connector and a 7 way trailer connector?
What is the Difference Between a 4-Way and 7-Way Trailer Connector A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer… view full answer...
What is the number for a taillight converter?
On the trailer side, behind the 7-Way, you will attach the Vehicle to Vehicle Taillight Converter, # 118158.
Do you need a 5th wheel hitch in a short bed truck?
Do I Have to Have a Sliding 5th Wheel Hitch in a Short Bed Truck You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to… view full answer...
