Initial Set Up
- 1. Plug the timer into a standard 125 VAC 60 Hz household electrical outlet.
- 2. Use a paper clip or ball point pen to push the "RESET” button, located directly below the "HOUR" button. ...
- 3. Press the "CLOCK" button and hold while pressing the "HOUR", "MIN" and "DAY" buttons individually to set the correct day and time. ...
How do I set the time on the timer?
If the screen is blank plug in the timer and leave for two hours to charge internal battery before programming. 2. Use a toothpick or sharp pencil to push the RESET button. Once pushed, the screen will go blank briefly and then display 12:00 AM. See Figure 2. 1. Press and hold down the “CLOCK” button through the time and day setting process. 2.
How do I reset the time and day on my Clock?
Use a toothpick or sharp pencil to push the RESET button. Once pushed, the screen will go blank briefly and then display 12:00 AM. See Figure 2. 1. Press and hold down the “CLOCK” button through the time and day setting
How do you use the Onon button on a light timer?
ON position. Plug the light or device into the timer and plug the timer into the wall. Your timer is ready to use! Note: The lamp or device will not come on until the next ON time is triggered. button until the light/device turns on and the display reads AUTO ON.
How do I set the time on my GE digital timer?
0:191:19GE 15142 Outdoor Digital Timer - Setting Current Date and TimeYouTubeStart of suggested clipEnd of suggested clipUse a toothpick and push the reset button the timer should show 12:00 a.m. after reset. While inMoreUse a toothpick and push the reset button the timer should show 12:00 a.m. after reset. While in clock display. Press and hold the ok button for 2 seconds to put the timer in clocks setting mode.
How do I set my digital timer?
0:491:20Fosmon Digital Outlet Timer Instructions C-10749US - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe timer by default is 12 hour mode press the on and off button at the same time to switch to 24-MoreThe timer by default is 12 hour mode press the on and off button at the same time to switch to 24-hour mode the mode button selects between three different modes on/off. And tailor mode while in timer
How do you set a GE indoor timer?
How It WorksPull up all pins on the dial.Select a period (or periods) you want the device turned on, then push down ALL the pins that fall on or within that period.Rotate the timer's dial clockwise until the pointer on the face of the dial points to the current time of the day.More items...
How do I set the timer on my GE light switch?
0:012:2015312 On/Off Times (part 3 of 5) - GE SunSmart Timer - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress the plus or minus button to scroll through the three programming options dawn dusk and customMorePress the plus or minus button to scroll through the three programming options dawn dusk and custom time if you want your timer to turn on at night. And off in the morning. Select dusk for p1 on.
How do you set a timer?
TimerOpen your phone's Clock app .At the top, tap Timer.Enter how long you want the timer to run.Tap Start .When your timer finishes, you'll hear beeping. To stop the beeping, tap Stop .
How does a digital timer work?
The working principle of the digital timer is, it uses the power source and different electronic components for a time like hours, minutes and seconds. The power source of this timer is either a battery otherwise a power cable connection or the clock gearing controlled by the counter.
How do you set an indoor timer?
0:251:46How to set an indoor Mechanical Timer - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou turn the entire dial on the mechanical. Timer until that green arrow gets to the current. Time.MoreYou turn the entire dial on the mechanical. Timer until that green arrow gets to the current. Time.
How do you set a Christmas light timer?
0:061:19How to set a Christmas Light Timer - YouTubeYouTubeStart of suggested clipEnd of suggested clipGets dusk as soon as the Sun Goes Down it'll go ahead and turn your lights on and it'll leave it onMoreGets dusk as soon as the Sun Goes Down it'll go ahead and turn your lights on and it'll leave it on for eight hours so that way say it gets dark at five o'clock you're.
How do you set a smart electrician digital timer?
How do you set a Smart Electrician Timer?First, position the “Time Now” arrow on the timer to the current time.Next, select the time you want the lights to go on. For example, 6 P.M. Press down the 6 P.M. ... Next, decide what time you want the lights to shut off. Then press down all the buttons in between those times.
How do I reset my outdoor light timer?
0:472:04How to Reset Your Landscape Lighting Timer to Spring ForwardYouTubeStart of suggested clipEnd of suggested clipYou just pull them out place them back in as you can see sometimes you turn the timer a little bitMoreYou just pull them out place them back in as you can see sometimes you turn the timer a little bit when you set it so just all you have to do is reset it. And the red pin is gonna be your off pin.
How many Jasco timers can a GE SunSmart 7 day timer control?
I don’t have repair for defective timer. Open following link to identify timer and download manual. The GE SunSmart Seven-Day Two-Outlet Digital Timer can control up to two Jasco Products: GE Indoor Timer Installation Manual.
What day can a timer be used for?
The timer is capable of multiple day combinations such as Monday through Friday or Tuesday and Wednesday. Tell us some more!
Can a timer handle intended load?
Timer is not able to handle intended load. If you run into difficulties, re-post a specific question. Dec 14, Woods Outdoor Photoelectric 24 Hour You posted under photo of GE which coincidentally has same buttons, but may or may not have same programming Open following link to identify timer similarities.
Does Jasco carry GE timers?
Please assign your manual to a product: Jasco carries wide number of GE products, including timers GE timer manuals can be found at:
