Stitch one side of the cuff to top of the outer stocking. Sew the lining stocking to the other side of the cuff. The three pieces should look like a big “U” shape. Repeat for the other stocking pieces. Place the stocking pieces right sides together.
How do you attach a cuff to a stocking?
Place the stocking cuff inside the stocking, with the wrong side of the stocking against the right side of the top piece. Align all the edges with the top of the stocking and match the seams, pinning in place. Cut a 6-inch piece of ribbon and fold it in half.
How do you sew a faux fur cuff on a stocking?
How to Sew Christmas Stockings with a Faux Fur Cuff. Fold the ribbon in a loop and pin it to the top of the cuff. Slide the stocking into the lining so that the right sides are together (the lining will be inside out) and pin along the top. Sew the three layers (outside, cuff, lining) together along the top.
How do you sew Christmas stockings together?
Place the stocking right sides together—align all the edges and pin in place. Sew around the edges, leaving the top of the stocking open. If you are using a fabric other than fleece, apply a seam finish (like a zigzag stitch) to prevent fraying. Turn right side out.
What do I need to make a cuffed stocking?
If you’d like to sew your own cuffed creation, here’s what you’ll need: 1. ½ yard stocking fabric 2. ½ yard liner fabric 3. ½ yard cuff fabric (only for bias cut piping, otherwise just a scrap) 4. batting (optional) 5. thread 6. stocking template 7. piping cord (optional) 8. scissors and pins.
How do you make a quilted Christmas stocking with a cuff?
0:1817:39Make a Quilted Christmas Stocking with Jenny of Missouri Star! (Video ...YouTubeStart of suggested clipEnd of suggested clipThe inside of your stocking. When you go to quilt it and it's also going to make the little 4 inchMoreThe inside of your stocking. When you go to quilt it and it's also going to make the little 4 inch cuff that goes all the way around the top so this is just a really quick and easy project.
How do you measure a Christmas stocking cuff?
To begin, measure the top edge of your unfinished stocking. Measure it before you have sewn the front and back together. Next you need to decide on the length of your cuff. For this stocking, I chose to have a 4" cuff.
How do you sew a Christmas stocking?
0:0013:17EASY CHRISTMAS STOCKING SEWING PATTERN - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo start by taking the fabric that you're going to be using for the outside piece of your stocking.MoreSo start by taking the fabric that you're going to be using for the outside piece of your stocking. And you're going to fold that in half on your cutting table or work surface.
How big is the cuff on a stocking?
You want it to be about 1/2 inch wide and 3 or 4 inches long. This is used for your stocking hanger. PIN this INSIDE your stocking sandwich BETWEEN the LINING and the CUFF on the left side of the stocking (the heel side). If you forget this, you will have a beautiful stocking that you cannot hang.
What is the normal length of Christmas stocking?
18 to 28 inchesGenerally speaking, standard-size stockings range in length from 18 to 28 inches.
How much fabric do I need for a Christmas stocking?
How much fabric do I need to make a Christmas stocking? Usually, half a yard (half a meter) will be more than enough to make one Christmas stocking in average size, but it's even more fun if you use scraps.
How do you make a large Christmas stocking?
1:0614:37How to Sew a LARGE Christmas Stocking with Janome ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's about 23 inches wide at its largest point and 22 and a quarter inches. Long. So you're going toMoreIt's about 23 inches wide at its largest point and 22 and a quarter inches. Long. So you're going to need fabric for the outside fabric for the lining interfacing or batting.
How many yards of fabric do I need for a stocking?
To create 1 stocking, you'll need: ½ yd. of fabric for lining (we used Acetex Cotton Velvet Forest but you can use any quilting cotton, velvet, velveteen, or satin) General sewing supplies.
How do I make a free Christmas stocking?
0:5725:34FREE Sewing Pattern! DIY Christmas Stocking Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne i like to tape four pieces of paper together lay your stocking down and then trace itMoreOne i like to tape four pieces of paper together lay your stocking down and then trace it approximately half an inch around the entire thing the half an inch just accounts for the seam allowance.
How do you make a hanging loop on a stocking?
0:441:51Hanging Stockings With Ribbon : Cold Weather Crafts - YouTubeYouTubeStart of suggested clipEnd of suggested clipI'm going to pass it through the loop. Pull. It tight now our thread is secure I'm going to cut offMoreI'm going to pass it through the loop. Pull. It tight now our thread is secure I'm going to cut off all the tails. And now your loop is attached and lastly to hang your stocking.
How do you line a stocking?
0:000:49HOW TO LINE A CHRISTMAS STOCKING - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you're going to fold down the top and with a needle and thread you're going to sew the binding toMoreSo you're going to fold down the top and with a needle and thread you're going to sew the binding to the inside of the stocking.
How do you make faux fur Christmas stockings?
1:065:32Faux Fur Stockings - DIY THRIFTMAS Day 5 - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd place the felt right on top of the fur and sandwich it together. This is gonna help keep the furMoreAnd place the felt right on top of the fur and sandwich it together. This is gonna help keep the fur under control because working with fur. Gets quite messy.
How do you make a hanging loop for a stocking?
0:231:51Hanging Stockings With Ribbon : Cold Weather Crafts - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd put it through the loop pulling it tight I'm going to do that one more time and this is going toMoreAnd put it through the loop pulling it tight I'm going to do that one more time and this is going to secure our thread without having to make a knot. I'm going to pass it through the loop. Pull.
How do you line a stocking?
0:000:49HOW TO LINE A CHRISTMAS STOCKING - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you're going to fold down the top and with a needle and thread you're going to sew the binding toMoreSo you're going to fold down the top and with a needle and thread you're going to sew the binding to the inside of the stocking.
How to stitch stockings together?
Slowly and carefully stitch your two sides of your stocking together (inside out), fitting the piping in between.
How to make a loop hook for a stocking?
For your loop hook, take a long strip of stocking fabric, sew it together (inside out) to form a long strip then use a safety pin to turn it right side out. Hand or machine stitch it to the inside of your stocking.
Can you put batting on a stocking?
Layer the batting between the liner and stocking fabric and pin it, then sew together with sewing machine. Note, if you skip the layer of batting, you can go right to sewing the liner and outside fabric together ( inside out) without sewing each side of the stocking individually.
Can you sew a stocking on a sewing machine?
Sewing a simple stocking couldn’t be easier if you can sew a straight line (and around the little curved boot) on a sewing machine. Of course I had to complicate matters and add batting for thickness, piping for contrast, and a decorative cuff, but in the end I’m glad I decided on those little extras.
How to sew fur cuffs on stockings?
Slide your fur cuff onto the stocking, right sides together so that the top of the cuff is along the chalk line. To make sure that the fur is pointing the right direction, I draw an arrow on the wrong side of the cuff showing what direction it’s pointing. You want the fur to be pointing up at this point in time so that it points down when you flip the cuff up. Sew it in place using a 1/4″ seam allowance.
How to pin a stocking into the lining?
Slide the stocking into the lining so that the right sides are together (the lining will be inside out) and pin along the top.
How to sew a stocking in the round?from craftcore.ca
I start and stop on the loop pull, and reverse stitch along the entire edge of the loop for extra stability. Sew all the way around the top raw edges of your stocking.
How to put trim on a cuff?from happiestcamper.com
To add trim to the bottom of the cuff, lay the trim over the edge of the cuff while it’s folded out of the stocking . Pin the trim all the way around the opening.
Why make your own Lined Christmas stockings?from homemadeonourhomestead.com
There are a lot of reasons why you might choose to make your own Christmas stockings so let's go ahead and list off a few here.
How to make a sock with fusible fleece?from craftcore.ca
First, fuse the fusible fleece to one of the main sock pieces. Layer the fusible fleece with the sticky side up and the main sock piece right side up. Follow the exact instructions for your brand of fusible fleece, but generally, you’ll be pressing with your iron to apply heat to activate the glue.
How to keep stockings from shifting?from homemadeonourhomestead.com
Leaving the exterior (2) pieces of your stocking RST (right sides together), pin or clip them togther so they don't shift during sewing.
How to sew a band on a sleeve?from sewingpartsonline.com
Lay your band piece- right side up, in front of you, horizontally. Bring the left side over to the right side. Mark your seam allowance with your air erasable marker, which would be 1/2″. Pin. Sew. Cut any excess to eliminate bulk. Press open the seam. With your band piece in front of you, seam up, fold the fabric in half, forming a band, exposing the right side of the fabric. Align the seams and raw edges. Pin or use fabric clips to hold it in place.
How to make a stocking with a rotary cutter?from sewingpartsonline.com
If you have a rotary mat and cutter available, I suggest using it for this part. Fold your lining fabric in half and place it on the rotary mat. Next, lay your pattern on top of the fabric. If needed, lay fabric weights to hold the pattern in place. Using your rotary cutter, cut out the lining pieces. Otherwise, you can use your fabric scissors to cut out the lining pieces. Remove the weights and the pattern. Place a few fabric clips around the stocking to hold it in place. Next, using an air erasable marker and ruler, mark 1/2″ seam allowance around the entire stocking, excluding the top. Go back and connect all the dots. Lastly, pin the pieces together.
Where to sew cuffs on a stocking?
Sew on the outside of the stocking, the cuff to the stocking. Then flip it over the right side of the stocking to show the cuff.
How to enhance a cuff?
To enhance the look of the cuff you can add some trim to the cuff or something else festive. I added a line of fur trim I had just to the front of the stockings. Again, nobody will see the back. If you give these as gifts of hang them where you will see all sides, feel free to add it all the way around the stocking. I actually hot glued this onto my stockings since the fur is a little tricky to sew.
How to make a loop on a t-shirt?
Hem one edge of the fabric all the way down then sew together {right sides in} one short end so you have a loop.
Can you sew cuffs out of the same fabric?
Some people sew a cuff of the same fabric, but I wanted a little different color for the trim so I choose a white fuzzy fabric I had. Again, this was all leftover, but you can definitely score all kinds of remnants at the fabric store on clearance. Or maybe make them out of tea towels or old clothes for sentimental reasons? The choice is yours.
How to fold a stocking cuff?from positivelysplendid.com
Fold the stocking cuff piece in half width-wise, as shown, aligning the short edges. Pin.
How big is the cuff of a stocking?from positivelysplendid.com
Now, use a rotary cutter and mat to cut a piece of fabric for the cuff portion of your stocking that is 10 x 13.5 inches.
How to make a stocking with a rotary cutter?from positivelysplendid.com
From your main fabric: 1 outside front piece and 1 outside back piece (These can either be of the same fabric, or different fabrics, depending upon your preference) Now, use a rotary cutter and mat to cut a piece of fabric for the cuff portion of your stocking that is 10 x 13.5 inches.
How to pin a stocking into the lining?from tuesdaystitches.com
Slide the stocking into the lining so that the right sides are together (the lining will be inside out) and pin along the top.
How much margin do you need to sew a stocking?from triedandtruebytrista.com
You are ready to sew it all together. Sew the top of the stocking all the way around with a 1/4 margin.
How far to stitch ribbon on stocking?from positivelysplendid.com
Stitch 1/8″ from the edge to baste the ribbon to the stocking, making sure to remove the pin when you’re finished.
Where to put cuffs on stockings?
Place the stocking cuff inside the right-side-out stocking, aligning the side seams and raw edges at the top.
How to make a Christmas stocking?
Assemble the Body of the Christmas Stocking. Place both stocking body pieces right sides together—align all the edges and baste or pin in place. Sew around the edges, leaving the top of the stocking open. If you are using a fabric other than fleece, apply a seam finish (like a zigzag stitch ) to prevent fraying.
How to stop thread jams when sewing fleece?
To help prevent thread jams when sewing fleece, lower the pressure on your sewing machine's presser foot. Personalize a stocking by using novelty prints and unconventional fabrics . Use a copy machine or adjust your printer settings to enlarge or decrease the size of the pattern to your liking.
How to make a cuff with a pin?
Turn one of the cuffs right side out. Place the turned cuff inside the outer cuff, right sides together. Align the edges, pin, and sewing around the one edge (this will be the bottom of the cuff). Turn the cuff right side out.
What stitch to use to prevent fraying?
If you are using a fabric other than fleece, apply a seam finish (like a zigzag stitch ) to prevent fraying.
Can you use stabilizer on a cuff?
Of course, the pattern still works with other fabrics. If you choose to work with quilting cotton, consider adding stabilizer to the cuff. To make the cuff from faux fur, use a lightweight lining fabric for one set of the cuff pieces.
Can you use fleece for Christmas stockings?
There are lots of ways to make Christmas stockings, but this one is quick and easy. Because it's designed to use fleece, you don't have to worry about lining or edge finishing. Plus, fleece comes in so many colors and designs that you can craft customized stockings for every person in your family and can even match them to other handmade holiday decor and gifts .
How to sew a lining stocking?from sewverycrafty.com
Stitch one side of the cuff to top of the outer stocking. Sew the lining stocking to the other side of the cuff. The three pieces should look like a big “U” shape. Repeat for the other stocking pieces.
How to stitch stockings together?from sewverycrafty.com
With right sides together stitch the two stocking pieces together using a 1/4″ seam allowance. You will stitch all the way around the stocking pieces leaving an opening at the bottom of the lining.
How to make a stocking with ribbon?from sewverycrafty.com
Place the stocking pieces right sides together. Take a 6″ piece of ribbon and make a loop. Place the loop between the lining layers near the top of the main stocking piece so that the raw edges match and the loop is inside the stocking at the back. Pin.
How to turn a stocking right side out?from sewverycrafty.com
Turn the stocking right side out by pushing the stocking pieces through the opening you left in the lining. Sew the hole in the lining closed.
