- Park the Murray 12.5 horsepower mower on a hard level work surface, such as a driveway. ...
- Place a jack under the rear of the mower frame. Position the jack so it is centered from side to side.
- Pull the hub cap from the axle on the wheel and tire to be removed. Use a screwdriver and pliers to help remove the cap, if necessary.
- Slide the wheel and tire off the axle. Take the wheel and tire to a mower repair shop for inspection and repair or have a new tire mounted on ...
- Slide the wheel with repaired tire back onto the axle. Place the washer on the axle next to the tire, then snap the E ring back on the axle.
- Move to the opposite axle and repeat the process to remove the other tire on the Murray mower, if necessary.
How do you replace a tire on a Murray lawn mower?
Place the washer on the axle next to the tire, then snap the E ring back on the axle. Place the hub cap on the axle end for protection. Move to the opposite axle and repeat the process to remove the other tire on the Murray mower, if necessary. Raise the mower with the jack, remove the jack stands and lower the mower to the ground.
How do you remove a tire from a John Deere lawn mower?
Raise the mower with the floor jack until the bottom of the tire is off the ground. Remove the plastic cap in the center of the rim. Use a pair of pliers to twist the cap away from the rim. When removing front tires, bend the retaining cotter pin straight with a pair of pliers and pull the cotter pin out of the axle.
How do you jack up a Murray Riding lawn mower?
Park the Murray 12.5 horsepower mower on a hard level work surface, such as a driveway. Set the parking brake, leave the transmission in gear and turn the mower engine off. Put on gloves to protect your hands while working. Place a jack under the rear of the mower frame. Position the jack so it is centered from side to side.
Why do you remove the back wheel on a Murray Riding mower?
Riding lawn mower wheels need to be removed to make repairs to the tires in the case of punctures or slow leaks. Murray riding mowers are available in many models, some of which have hubcaps and others that do not. Following safety practices to remove the back wheel correctly prevents injuries.
How do you remove a riding lawn mower wheel?
1:072:18How to Replace a Lawn Mower Wheel - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo that it's supported. And the wheels are off the ground. Now remove the hubcap. And then removeMoreSo that it's supported. And the wheels are off the ground. Now remove the hubcap. And then remove the nut that secures the wheel with a ratchet wrench. If your model has a cotter pin.
How do you get a stuck tire off a riding lawn mower?
1:074:56How To Remove Rear Lawn Mower Wheel & Install - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd just try to get as close to that axle as possible. And you're just going to tap tapping you don'MoreAnd just try to get as close to that axle as possible. And you're just going to tap tapping you don't want to hit it too hard or you poke this all through the axle or whatever you're using.
How do you take the axle cap off a riding lawn mower?
0:143:38Remove Lawn Tractor Wheel Without Damaging Cap - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe want to check a cage mate see if it's softening up starting to soften up. If it's gonna get. Hot.MoreWe want to check a cage mate see if it's softening up starting to soften up. If it's gonna get. Hot. It's getting pretty pliable right now.
How do you remove a front tractor tire?
0:276:17Changing the Front Tire on a Ford Tractor - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace at least one jack stand under the frame just to be safe remove all the nuts. And you should beMorePlace at least one jack stand under the frame just to be safe remove all the nuts. And you should be able to just wiggle the wheel off the hub.
How do you remove a rear tractor wheel?
To remove and install your tractor's rear wheels.Park the tractor safely and securely.Shut off the engine. Place chocks (A, Fig. 1) on each driving direction of the front and rear wheels. ... Loosen the rear wheel bolts. Half turn the wheel bolts (A, Fig. 2) from the rear wheel (B, Fig. ... Remove the rear wheels.
How do you change a front wheel on a riding lawn mower?
0:425:02HOW-TO Replace Lawn Tractor Front Wheel Bushings - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd remove the washer. There might be two washers in some cases. Now just remove the wheel. AndMoreAnd remove the washer. There might be two washers in some cases. Now just remove the wheel. And there's two bushings in total one on each side of the rib.
How do I remove hubcaps?
0:021:12How to Remove a Plastic Wheel Cover (hubcap) - YouTubeYouTubeStart of suggested clipEnd of suggested clipCover take a cloth use your lug wrench with the wheel cover remover on the end. Cover it up so itMoreCover take a cloth use your lug wrench with the wheel cover remover on the end. Cover it up so it won't scratch on your wheel cover get on a solid wide part shove it in the edge pry.
How do you get a dust cap to stay on?
0:271:58Dust Cap Installation "Quick Tip" - YouTubeYouTubeStart of suggested clipEnd of suggested clipI like to use a punch. And you tap around the edge. You tap it all the way around.MoreI like to use a punch. And you tap around the edge. You tap it all the way around.
Where to put wood block on mower tire?
Place a block of wood on each side of the tire on the opposite end of the mower that you will be working.
How to remove tire beads from rim?
Remove the tire from the rim using two crowbars to pull the tire beads from the rim.
How to release air from a tire?
Lay the tire and rim on a flat surface. Remove the cap from the valve stem and press a flathead screwdriver in the middle of the valve stem to release the remaining air.
How to put a tire on the axle?
If you are working on a rear tire, position the notch on the inner rim with the notch on the axle. Tap the square key into the notch with a hammer.
How to twist a cap off a car?
Use a pair of pliers to twist the cap away from the rim.
Where is the square key on a tire?
Remove the square key that is in between the axle and the rim with a pair of vise grips, if you are changing the rear tire. Do not lose the key, because it is necessary for reinstallation.
Where to place floor jack on a car?
Position the floor jack under the middle of the front frame, if you are changing the front tire. If you are changing the rear tire, position the jack under the rear frame.
Removing rear tires from Murray riding mower
I lost the manual for our Murray riding mower. Can anyone tell me how you are supposed to remove the rear tires? There is a black cap in the center but I can't get it to do anything but spin around. What's the trick?
Comments (6)
As fix_it stated, they can rust on the axle and, in my case ('87 Wards LT), be virtually impossible to get off (bent the puller, burned the paint while using a torch, copious amounts of Kroil, lots of BFH application, all to no avail. I needed to replace the rear tire.
How to park a Murray 12.5?
Park the Murray 12.5 horsepower mower on a hard level work surface, such as a driveway. Set the parking brake, leave the transmission in gear and turn the mower engine off. Put on gloves to protect your hands while working.
What is a Murray 12.5 horsepower lawn mower?
Murray 12.5 horsepower riding lawn mowers are suitable for homeowners with medium to large yards or those who prefer a rider to a push mower. Owning a Murray riding mower requires routine maintenance for normal use. Flat tires sometimes occur and need repairing.
How to remove hub cap from wheel?
Pull the hub cap from the axle on the wheel and tire to be removed. Use a screwdriver and pliers to help remove the cap, if necessary. Remove the E ring with pliers and pull the washer behind it off the axle.
How to remove a Murray riding mower hubcap?
Place a pair of slip joint pliers over the hubcap on the back wheel you want to remove. Grasp the hubcap tightly, but not tight enough to dent it. Wiggle the pliers left and right while pulling outward to remove the hubcap. Some models of Murray riding mowers do not have hubcaps on the axle.
When replacing a lawn mower wheel, should the air valve be facing outward?
Make certain that the air valve face s outward when replacing a lawn mower wheel.
Why is my lawn mower unlevel?
If the tire air pressure is low due to a slow leak or a puncture, it will make the mower housing unlevel. The grass on that side of the lawn mower is cut shorter that the other side and this can scalp your grass. It is a good idea to check the air pressure in all four tires when you change a tire.
What is the name of the woman who writes about lawn mowers?
Make certain that the air valve faces outward when replacing a lawn mower wheel. Writer Bio. Mary Lougee has been writing for over 10 years. She holds a Bachelor's Degree with a major in Management and a double minor in accounting and computer science.