- Install the Tape Roll. Every drywall banjo has a wheel that houses a roll of drywall tape. Simply place the tape over the wheel until it is secured.
- Thread the Tape. Open the banjo and feed the drywall tape from one end of the banjo to the other. ...
- Thin Your Drywall Compound. While you prepare your joint compound, make sure you thin out your all-purpose joint compound with water using a sponge.
- Place the mud into the chamber. Take your mixture of all purpose drywall compound and place it into the mud chamber in your drywall banjo.
- Adjust the Flow of Mud. The drywall banjo is able to adjust the flow of mud allowing drywall mudders to control how much mud is used while taping.
- Taping with the Banjo. First thing you will want to do is place your hand through the strap on the banjo. ...
How do you cover a banjo with drywall tape?
Thread paper drywall tape through the banjo as shown in the photo. Clamp the metal cover over the 250-ft. roll of tape to secure it. Pour the thinned joint compound into the banjo.
How do you fix a Broken Banjo?
Pull a section of tape away from the banjo wall and pour joint compound into the space to help cover the topside of the tape with joint compound when you pull it from the banjo (see photo). Completely fill the compartment and clamp the lid shut. Tip the banjo down and pull the tape until joint compound is visible on both the front and back sides.
How do you use joint compound on a banjo?
Pour the thinned joint compound into the banjo. Pull a section of tape away from the banjo wall and pour joint compound into the space to help cover the topside of the tape with joint compound when you pull it from the banjo (see photo). Completely fill the compartment and clamp the lid shut.
What is a banjo used for?
A banjo is a tool designed to perfect drywall taping. It can be a great tool for the do-it-yourselfer because it will speed up the process and prevent the loose and bubbly tape commonly produced by beginners. A banjo can be purchased and sometimes rented from your local home improvement store.
How do you load a banjo tape?
0:141:22Using a "Banjo" drywall taping machine - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo load open up the banjo and insert a roll of sheet rock paper junk tape. Feeding the tape aroundMoreTo load open up the banjo and insert a roll of sheet rock paper junk tape. Feeding the tape around the profile of the banjo.
How do you use a drywall taping machine?
1:247:47Automatic Drywall Taper How To: Tape Walls and Ceilings | Video 4/6YouTubeStart of suggested clipEnd of suggested clipYou want to run it on an angle. So you're leading with the taper you don't want to be holding. ItMoreYou want to run it on an angle. So you're leading with the taper you don't want to be holding. It perpendicular to yourself trying to walk backwards like this you want to get it on an angle.
Can you use mesh tape in a banjo?
Drywall banjos can use both regular paper tape or fiberglass mesh tape. Fiberglass mesh tape is more user friendly for beginners because it requires less mud than regular tape. Instead of applying mud first then tape then another layer of mud you apply the tape first then the mud because one side of the tape is sticky.
What is drywall banjo?
1:374:49Taping Drywall with a Banjo - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere it is again snap the tape up into position and then smooth and clean off all of the excess.MoreHere it is again snap the tape up into position and then smooth and clean off all of the excess. Compound. Use the drywall knife to smooth out the tape start from the center and work to each.
How do you use automatic taping tools?
0:209:08How To Use An Automatic Drywall Taper | A Complete Guide | Video 3/6YouTubeStart of suggested clipEnd of suggested clipThere's a front and back to paper tape where the crease is there's obviously a peak there. So youMoreThere's a front and back to paper tape where the crease is there's obviously a peak there. So you want to make sure that when you're feeding it through the peak is at the back side of the machine.
What is a taping tool?
0:074:08Wallboard Plastic Taping Tool demonstration - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply open the lid install the tape very very simple. Simply pull the mud into the machine.MoreSimply open the lid install the tape very very simple. Simply pull the mud into the machine.
Can you use fiber tape in a banjo?
0:043:19Tips/Tricks on Taping With the Delko Zunder and FibaFuse - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the key to taping with a banjo and fiber fuse is mud consistency. So don't be afraid to add a lotMoreSo the key to taping with a banjo and fiber fuse is mud consistency. So don't be afraid to add a lot of water to your mud. And make it really thin.
How do you tape inside corners?
3:457:10HOW TO TAPE DRYWALL (INSIDE CORNERS) - YouTubeYouTubeStart of suggested clipEnd of suggested clipI flip my tape in its creased and I just find the center there and I keep it a quarter inch awayMoreI flip my tape in its creased and I just find the center there and I keep it a quarter inch away from each end. And then I quickly take my knife and very gently.
Can you use all purpose joint compound with mesh tape?
The mesh tape is bedded-in with a thin layer of quick-setting drywall mud and then feathered out with all purpose or lightweight all purpose drywall compounds. Most manufacturers recommend using quick-setting compound with mesh tape rather than all purpose pre-mixed mud.
Why Should I Use a Drywall Banjo?
Semi-automatic and fully automatic drywall machines significantly reduce the time needed to tape drywall joints. There are two different drywall mud and tape machines that can be used to speed up this laborious task. These are drywall bazookas and drywall banjos.
What Kind of Drywall Tape Can I Use with a Banjo?
Drywall banjos can use both regular paper tape or fiberglass mesh tape. Fiberglass mesh tape is more user friendly for beginners because it requires less mud than regular tape. Instead of applying mud first then tape then another layer of mud you apply the tape first then the mud because one side of the tape is sticky.
What Drywall Boards Can I Use a Banjo With?
Drywall banjos can be used for all types of drywall boards and plaster boards. No matter the job, you can use a drywall banjo for taping. Drywall banjos are useful for taping the following boards, white board, green board, blue board, paperless, purple, type x, and soundproof.
What Kind of Drywall Mud Can I Use With a Drywall Banjo?
Drywall banjos can use but not limited to any of the following types of drywall mud. Lightweight all purpose joint compound, topping compound, quick setting, hot mud, Durabond, pre-mixed drywall mud, and all-purpose joint compound.
How to get tape out of banjo?
Grab the tape and pull out about 12 in. Starting at the top of a vertical seam, center the tape and stick it to the wall. Hold the tape in this position while you pull the banjo with the other arm to release more tape.
How to make a banjo with drywall tape?
Mix the joint compound to determine its consistency. Then mix in water until the joint compound is thin enough to drip slowly from your mixer. Add small amounts of water by squeezing it from a sponge. Photo 2: Load the paper tape. Thread paper drywall tape through the banjo as shown in the photo.
How to secure a banjo?
Clamp the metal cover over the 250-ft. roll of tape to secure it. Pour the thinned joint compound into the banjo. Pull a section of tape away from the banjo wall and pour joint compound into the space to help cover the topside of the tape with joint compound when you pull it from the banjo (see photo).
Can you use a banjo for drywall taping?
Fast, trouble-free drywall taping is easy with this professional taper's tool. With a little practice you can learn to use a taping banjo and complete big drywall taping jobs in a hurry.
Is it OK to tape seams?
It’s OK to tape a number of seams before returning to embed the tape as long as the joint compound doesn’t start to dry out. Working with a partner who follows closely behind to embed the tape is a good way to speed up the job. Keep the tools clean to avoid lumps. Taping is a messy job.
How to Use A Banjo
Required Tools For This Project
- Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration. 1. Mud pan 2. Taping knife
Required Materials For This Project
- Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list. 1. Drywall paper tape 2. Joint compound