Sharpening Steps
- Step 1: Push the File or Run the Sharpener Get a good hold on the file and start pushing it. ...
- Step 2: Rotate the Chainsaw 180 Degrees and Sharpen Every Second Tooth Now rotate the chain and bring the nearest tooth. ...
- Step 3: Inspect if you Miss Any Tooth. ...
- Step 4: Fill the Rakers (This step is when you use a file)
What is the best chainsaw chain sharpener?
CHAIN SHARP: The CS-X chain saw sharpener stands out due to its very good file position, ergonomic shape and easier operation. The device provides a sharpening angle of 30° PRECISION: Optimized shape for precise guidance and optimal sharpening results.
How often to sharpen chainsaw?
This is How Often You Should Sharpen a Chainsaw’s Chain
- Every tank of gas. I suggest, especially for those who are new to this whole firewood cutting deal, to sharpen the saw’s chain every single time it runs out of ...
- Times when you need to work on the chain straight away. ...
- Tips. The biggest time saver to this whole “sharpening on the spot” deal is carrying multiple chains at once.
How to hand sharpen a chainsaw?
Using a chainsaw sharpener
- Rotary dresser: Always use either a rotary dresser or a dressing brick to ensure easy handling.
- Chain brake: Be sure to engage the chain’s brake, then clamp the chainsaw bar lightly in a vice.
- Direction: Place the chainsaw guide in between the rivets on the chain, but ensure that the arrows on the guide are pointing towards the nose of the bar.
How often do chain saw sharpener can be used?
You can mount your sharpener if you use your chainsaw throughout the year as it makes it easy to sharpen the tool and also helps to avoid accidents. In most cases, sharpening the chain should happen after ten times of being in use, while in other situations, you have to sharpen it after every session. Are electric chainsaw sharpeners good?
How To Use A Chainsaw Sharpener?
How to sharpen a chainsaw blade?
Why is it important to position a chainsaw blade?
How to set an angle on a sharpening stone?
How to clean a chainsaw chain?
How to sharpen a file?
Can you pick a sharpening stone?
See 2 more
How do I sharpen my chainsaw teeth?
4:415:22Technical Tips- How To Sharpen Chainsaw Chain - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou want to have two points of contact. And again with the flat file you want to file from theMoreYou want to have two points of contact. And again with the flat file you want to file from the inside. Out. So you want to run that file across the top of the depth. Gauges.
What angle do you sharpen a chainsaw tooth?
Always hold the file at a right angle (90°) to the guide bar. The file only sharpens on the forward stroke – lift the file off the cutter on the backstroke. Rotate the file a little at regular intervals while filing to avoid one-sided wear.
When should I sharpen my chainsaw teeth?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn't get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
What direction should teeth on a chainsaw be?
The important part of mounting your chain is to make sure the blades are facing the right direction. The correct direction for a blade to face is with the pointy edge of the blade teeth facing toward the way the blade rotates.
How can I make my chainsaw chain cut faster?
0:402:26FASTEST CHAINSAW in the EAST! - Simple Trick - ANYONE CAN DO IT!YouTubeStart of suggested clipEnd of suggested clipNow. Yes a sharp chain is always a good thing. But as you saw the opening. When you get to theMoreNow. Yes a sharp chain is always a good thing. But as you saw the opening. When you get to the second half of the chain it's an even better thing when you're cutting with the second half of the chain.
What is the best degree to sharpen a chainsaw chain?
The best degree to sharpen a chainsaw chain is between 25 and 35 degrees, with the file's pitch about 5 degrees from horizontal. This angle provides the best balance of cutting efficiency and durability. Maintain a consistent angle, as even a tiny deviation can reduce the saw's performance.
Why is my chainsaw burning the wood?
Smoking or burning wood and excessive chain rattle without any cutting are all strong signs that the chain is mounted backwards. If this is the case, discontinue use of the chainsaw immediately until the chain is reinstalled the correct way.
How many times can a chainsaw chain be sharpened?
A chainsaw chain can be sharpened up to 10 times, sometimes more, before the entire chain needs replacing. It's mostly dependent on two things; the amount of wear your chain incurs and the amount of metal removed every time you sharpen. Different materials can have a harder impact on the chainsaw chain.
How do I know if my chainsaw chain is sharp?
0:020:41How To Immediately Tell If Your Chain Is Sharp Enough - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe have some nice long chips here. And when it starts to turn into sawdust. That's when you know youMoreWe have some nice long chips here. And when it starts to turn into sawdust. That's when you know you need to resharpen your chain.
What happens if you put a chainsaw blade on backwards?
2:193:32What Happens when you Put the Chainsaw blade backwardsYouTubeStart of suggested clipEnd of suggested clipCut it like butter you have to put these blades on the right way a lot of you experienced guys you'MoreCut it like butter you have to put these blades on the right way a lot of you experienced guys you're going to be like oh my god that's common sense and you're right it is but i didn't know and i put
Why is my chainsaw smoking?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
Why does my chainsaw not cut?
Common solutions for: Chainsaw not cutting The most common cause of a chainsaw that won't cut properly is a dull cutting chain. Try sharpening or replacing the chain. The chain may not have the proper amount of tension. If the adjustment screw is too loose, the chain may not make good contact with the wood.
What angle do you sharpen a chainsaw with an electric sharpener?
You will need to place the blade in the chainsaw sharpener's holder and then adjust the angle. What is this? Typically, the most common angles are usually between 0 degrees and 60 degrees. In some special cases, however, the angle could go to 80 degrees.
What angle do I sharpen my Husqvarna chainsaw?
a 90° angleUse the round file. Place the file at a 90° angle to the rollers on the filing gauge. File with both hands. The file should rest on both rollers.
What angle do I sharpen my Oregon chainsaw chain?
2:068:39OREGON Chain Sharpening - YouTubeYouTubeStart of suggested clipEnd of suggested clipMost crosscut chains are sharpened at 30 degrees.MoreMost crosscut chains are sharpened at 30 degrees.
How do you sharpen a Stihl chainsaw with an Oregon grinder?
0:011:15How to sharpen your chain the right way on a STIHL Chainsaw - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou position the file so the filing angle is correct the file should also be 90 degrees to the guideMoreYou position the file so the filing angle is correct the file should also be 90 degrees to the guide bar use the full length of the file. And apply pressure as you file away from the tooth.
How to sharpen a chainsaw?
Once you have fully sharpened your starting tooth, rotate the chain to bring a new tooth closer. The cutters on a chainsaw alternate directions, so sharpen every other cutter using the same motion, at the same angle, the same number of times until it is sharp. Repeat until you get back to the starting mark you made.
How to sharpen a chainsaw with a table top?
1. Clamp the bar of the chainsaw to your work surface. Use a tabletop clamp or a vise to hold the chainsaw in place on your work surface . This will prevent the saw from shifting as you sharpen it, and result in a much more consistent and easy sharpening process.
How to make a chainsaw cut straight?
Make sure you sharpen both the left and the right cutters to the same size and at the same angle to ensure the chainsaw cuts straight. Any other variances might be due to your dominant hand or the way you are holding the chainsaw. As always, practice makes perfect.
How to use a chainsaw chain cutter?
1. Slide the file across the face of the cutter. Hold the file so that it remains level and flat over the top of the chain. In one smooth motion, push the file through the cutter. You shouldn’t need to apply a lot of pressure, only enough so that you feel the file grinding against the cutter.
How big is a chainsaw chain?
Note: Typical sizes for the chain are 3⁄16 inch (4.8 mm), 5⁄32 inch (4.0 mm), and 7⁄32 inch (5.6 mm) in diameter.
How many times should a chain be ground?
It is recommended that after a chain has been hand-sharpened five times, it should be ground by a chainsaw shop to correct any variations in tooth pitch that occurred during filing.
How many strokes per tooth for a chainsaw?
It depends on how dull your chain is, how hard the chain is, and how sharp your file is, but generally between 3 and 10 strokes per tooth.
How to sharpen a chainsaw?
Tips for Properly Sharpening a Chainsaw 1 File the same number of strokes per tooth. 2 Use more strokes if the chainsaw has hit a nail or has been cutting muddy wood, as both actions will dull the chain more. 3 Be sure to mark your starting point on the chain.
Why is it important to sharpen a chainsaw?
It is important to sharpen your chainsaw because a dull chainsaw forces you to press harder on the saw, a dangerous move. So, sharpening your chainsaw should be incorporated into your routine. There are three ways to go about this: Electric Sharpener: If you use your chainsaw more than a few times a year, it might be worth purchasing an electric ...
What is a metal file for chainsaw?
Guide and File: Metal files with matching guides help you to manually file the chainsaw teeth and the chain's depth gauges.
How does a chainsaw work?
A chainsaw's chain rotates clockwise if the saw if viewed from the right side. Or, when viewing the chainsaw from above, the chain moves forward (away from the user) along the top of the bar. Under the bar, cutting teeth bite into and abrade the wood.
What to do if your chainsaw hit a nail?
Use more strokes if the chainsaw has hit a nail or has been cutting muddy wood, as both actions will dull the chain more.
When to sharpen chainsaw chain?
Take a visual check of your chainsaw's chain while it is in place. When the leading edges of the teeth are rounded or out of the required angle, they should be sharpened. When the depth gauges on the chain are too high, this also is an indicator that it is time to sharpen the chain.
Why is it so hard to cut wood with a depth gauge?
When the depth gauges are too high in relation to the teeth, they make it more difficult for you to cut the wood. You are forced to press harder on the saw in order to make the cut.
How to sharpen a tooth that is worn?
With the bar in place in the vice, you should draw the file back and forth, evenly and steadily, across the cutting surface of the first tooth, at the same angle it already has in place. Three or four motions are usually enough to sharpen a lightly-worn tooth until it is shiny silver - a heavily-worn tooth will need to be worked more.
What is a handheld electric sharpener?
A popular choice of handheld electric sharpener is the type that looks similar to a drill bit and can be fitted into a Dremel tool or electric drill. All of these electric sharpeners are basically small circular grinding stones, which come in different diameters to fit the cutting teeth of your model of chainsaw.
What is a chainsaw file guide?
A file guide or holder is a useful accessory if you plan to sharpen your chainsaw chain with a round or flat file. This will assist you in getting your file at the correct angle to ensure all the teeth are sharpened in a uniform way. These guides are very helpful to anyone who is new to using a manual file - when you become more experienced you will probably be able to get the job done without one.
Why is consistency important in chainsaw cutting?
Consistency is important as irregular sharpening can make cutting with your chainsaw more difficult, and even dangerous.
What to do if your chainsaw is blunt?
If your chainsaw has become blunt and is not performing the way you need it to, it's time to get out a sharpener or take it to a professional for sharpening. If you use a chainsaw regularly it makes sense to buy your own sharpener, rather than paying out each time to get it sharpened. Chainsaw sharpeners are cheap and generally easy to use, ...
Why use a depth gauge tool?
After sharpening it's important to use a depth gauge tool to adjust and set the correct height of the chain's depth gauges - is these are set too high the cutting teeth on the chain will no reach far enough into wood. Checking your depth gauges is crucial for safe and efficient cutting.
Can you use an electric sharpener to adjust depth gauges?
Another point to look out for is whether the sharpener can be used to adjust depth gauges. Many electric sharpeners are designed specifically to sharpen the cutting teeth and have guides which hold the file at the right angle for this purpose alone. You may need another tool to adjust the depth gauges, which is a task that should be done regularly.
How To Use A Chainsaw Sharpener?
To understand the components like pitch and gauge, you can follow the user manual given with the chainsaw.
How to sharpen a chainsaw blade?
You have to lower the sharpening stone slowly on the first tooth of the chainsaw blade. After it makes contact, there will be some sparks flying. It will take a short time to sharpen a tooth.
Why is it important to position a chainsaw blade?
Appropriate positioning is vital. It makes the installation of the chainsaw blade on the sharpener easy. Thus, you can experience a smooth and more effortless sharpening procedure.
How to set an angle on a sharpening stone?
To set an angle, you have to loosen up the sharpening stone. Then it can rotate correctly. Once you set the proper angle, you have to tighten the locking wheel or stone again. To prevent overheating, damages, and cutting deep, you must tighten the lock stop.
How to clean a chainsaw chain?
You have to remove the chain from the saw first. Then clean it by using a cleaning mixture. Let it dry and then lift it. Now input it into the sliding tracks.
How to sharpen a file?
Get a good hold on the file and start pushing it. Push it through the cutter remaining on a level. You don’t have to push it harshly. Make sure it doesn’t cause any harm to the file or cutter. Lift out the cutter and replace it again in the same place. Push it in the same way until you get it sharp and shiny. (You need to do it 3-10 time; according to its dullness level)
Can you pick a sharpening stone?
Once your sharpener is in the right position, you have to input a wheel or stone. Since now you know the measurements, you can choose the specific sharpening stone.
