How do you use a hook clasp?
- MATERIAL. You need:
- CUT. Cut a piece of copper wire long about 5 cm.
- FILE. File one of the edge of the wire.
- SHAPING THE HOOK. Bend the edge with the long nose pliers, of about 2 mm, on a 30° angle.
- SHAPING.
- SHAPING.
- FINISHING THE HOOK.
- HAMMER.
How do you hook a fish with a hook clasp?
I thread the hook into the top open section of the fish, hook it and push it down, but the top part of it does not go in. Any ideas Make sure the hook is going all the way down. Some clasps will only close completely in one direction. In other words, take out the hook, turn it 180 and insert back into clasp.
What is a hook and eye clasp?
Rustic hook and eye clasp by Cathy Dailey. Also known as a duet clasp, the hook-and-eye clasp is very simple in design yet quite effective. It features two identical rings, each having a small slit or opening, allowing you to insert one into the other easily.
How do jewelry clasp hooks work?
These work like a miniature version of a snap hook or a climbing karabiner. By pushing in the one-way hinge from the outside with your fingernail or a chain tab, you can open the clasp and hook your jewelry piece. Its hinged lever can’t be opened from the inside.
How to use a clasp on a bracelet?
To open and close the clasp, you need to push a small lever that slides along the ring or metal circle and then release it. This small but effective clasp style is mostly found in fine pre-made and lightweight necklace chains. It’s almost impossible to hook these one-handed, which is why they aren’t suitable for bracelets.
How do you attach a hook clasp?
1:293:52Art Jewelry - S-hook clasp with looped ends - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I put the pliers in I this time pull so they're opposite. Then I move partway up wherever I likeMoreSo I put the pliers in I this time pull so they're opposite. Then I move partway up wherever I like the first hook to be and I move down lower on to the onto the round nose pliers.
What is a hook clasp?
Hook clasp — A hook clasp uses an easy hook-on, hook-off motion. A curved piece at the bottom of the hook catches onto a loop or circle to hold it in place. Lobster clasp — Named after the pinching style of the hook, a lobster clasp is often shaped like a lobster's claw.
How do you put a hook on a necklace?
To form the hook into a loop, grip just before the tip with your chain nose pliers and using a combination of moving the pliers and either your finger or the table underneath to help form it into a teardrop shape.
How do you use a clasp connector?
0:375:06How To Attach Crimps & Clasps - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow you need some movement jewelry needs to move so don't put it too near the clasp slightly awayMoreNow you need some movement jewelry needs to move so don't put it too near the clasp slightly away from that toggle clasp and just squeeze it to tight with your flat nose pliers.
How do you open a clasp?
To open the clasp, you pinch the ends of the hook together and slide it out. Safety clasps come in many sizes and materials, but it's common to find them in gold and sterling silver. This is one of the most secure options for fine jewelry, however it does have a couple of disadvantages.
What is the most secure necklace clasp?
In general, the most secure clasps are the lobster, hook and spring ring clasps, which are used for most necklaces and bracelets. Having said that, most designers tend to choose the best clasp based on the design and durability of the piece, taking the pros and cons of each clasp type into consideration.
How do you attach a hook and eye clasp to a necklace?
0:020:40How to use Hook and Eye Clasps for Jewelry Making - YouTubeYouTubeStart of suggested clipEnd of suggested clipHook and eye clasps are pretty straightforward there's a loop on one end and a hook for it to attachMoreHook and eye clasps are pretty straightforward there's a loop on one end and a hook for it to attach. Into. Pretty easy and intuitive to use there's no buttons no triggers no levers.
How do you tie a hook and eye clasp?
6:3113:06How To: Sewing Hook & Eyes - YouTubeYouTubeStart of suggested clipEnd of suggested clipFrom at the front to the back just. Like so and you're going to keep pulling on this and this willMoreFrom at the front to the back just. Like so and you're going to keep pulling on this and this will make an very small knot on the top of the stitch that you're created.
How do you end a necklace with a clasp?
To finish your necklace; thread a crimp on after your last bead and simply feed your thread or wire through the protector. Slip your clasp, necklet-end or jump ring over the protector and the thread together, pass the thread back down through your crimp and fasten as you would normally.
How does a slide lock clasp work?
Slide Lock Clasps consist of a set of tubes, one of which slides inside the other and locks into place. The bar style of these multi-strand clasps holds an almost unlimited number of strands of chain, cord, beading wire or thread.
How does a toggle clasp work?
0:362:54How to Use a Toggle Clasp - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne in first through the ring. Pull. It through. And then it locks in place and so when you haveMoreOne in first through the ring. Pull. It through. And then it locks in place and so when you have this on your wrist or on your neck. You have the tension pulling in either direction.
How do you attach a clasp without crimp beads?
1:425:21How to Finish a Strung Necklace without a Clasp - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you look here you don't want gaps along the edge. But you don't want it so tight that it's stiff.MoreIf you look here you don't want gaps along the edge. But you don't want it so tight that it's stiff. So I kind of wiggle mine usually a little bit make sure it's still can wiggle.
Community Q&A
I thread the hook into the top open section of the fish, hook it and push it down, but the top part of it does not go in. Any ideas
Tips
If there is considerable tarnish on the clasp, you might consider getting it cleaned. If the necklace is a set of pearls, do not attempt to do this by yourself, and instead consult a jeweler.
Warnings
Stubborn clasps that won't open should be taken to a jeweler. Attempting to fix the problem yourself may damage the necklace.
About This Article
wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time. This article has been viewed 90,186 times.
How to get around clasps?
One simple way to get around clasps is to opt for a long necklace that can simply be slipped over your head without the need of a clasp. These vary greatly in length and style, from ropey pearls to long gemstone necklaces. So there you have it. The top types of clasps used in jewelry. And now the burning question:
What is a fishhook clasp?
They’re quite elegant and can be an integral part of the design, featuring gemstones, diamonds, inlay work or other decorative elements. Although it looks complicated, it’s essentially a metal hook fitting into a section inside the oval-shaped box.
How does a box clasp work?
A box clasp works by inserting a little tab into a box-shaped frame, with a little hinged clasp used to cover the opening. Box clasps are elegant and stylish and integrate seamlessly into the design. They’re commonly used in jewelry like diamond tennis bracelets.
What is a Bolo clasp?
While the bolo is a sturdy little bead that holds the chains together, the chains themselves can sometimes break, especially if they’re thin.
What jewelry requires clasps?
The types of jewelry that require clasps are mainly necklaces, bracelets and anklets. Designers often choose the type of clasp depending on the size, style and quality of the jewelry. If you want a quick look, jump to our infographic at the end of the article that features all the types of clasps we talk about in the article.
What is a magnetic clasp?
Magnetic Clasp. Magnetic clasps are designed so that both ends of the piece of jewelry contain one half of the clasp. When brought together, these two parts snap shut. Magnetic clasps use strong magnets that hold on securely. The style of clasp is elegant and can be easily integrated into the overall jewelry design.
What is a clasp in jewelry?
Here, the clasp is part of the jewelry and is definitely meant to be eye-catching. Buckle clasps work like traditional buckles, except that it’s all made of metal. They’re quite rare and not one you’ll come across often. Here’s a video that shows more examples of these clasps.
How to open a clasp?
To open the clasp, the hook needs to be pressed together and pulled out of the casing. These are delicate but secure clasps, which make lightweight jewelry look fancy. They’re often used with knotted pearl necklaces, strung on silk cords with bullion or bead tips.
How do screw clasps work?
These operate by screwing one end of a fastener into the other, holding a jewelry piece tightly into place. Screw clasps come in a wide range of sizes and shapes. They’re typically barrel-shaped but are also found in many other shapes like spheres or cylinders.
What is a swivel clasp?
However, they can also be quite strong and large, suitable for chunkier pieces of jewelry. A swivel is another type of lobster clasp with a 360-degree rotating base. Swivels allow jewelry pieces to roll and move freely in any direction, making them great options for anklets or bracelets.
How does a lobster clasp get its name?
It got its name because of its resemblance to a lobster claw. By pulling and releasing a small lever on the side of the claw, the clasp will open and then close again. These clasps have a sleek look and come in a variety of materials and sizes. The size of a lobster clasp will depend on the weight of a jewelry piece.
What is a clasp in jewelry?
Types of Jewelry Clasps. Besides having the role of securely connecting two ends of a bracelet or a necklace, clasps are often the make-or-break part of their design. It can be very frustrating when you have to spend a lot of time wrestling with a clasp instead of getting dressed for a night out. There are many different types ...
What is a metal buckle clasp?
Featuring the same mechanism as a belt buckle, this clasp style is usually found in material or leather bracelets, wristwatches and choker necklaces. Buckle clasps are also rarely used in gold and other metal jewelry. The eye-catching buckle clasp can turn any piece of jewelry into a statement piece.
What is a boho clasp?
Antique silver box clasp by Boho Bead Peddler. Box clasps are two-piece tongue-and-groove clasps, with a box frame on one end and a wedge-shaped tab on the other. This type of clasp works by inserting the tab into the box frame and letting it click into place.
