Hydro Ban has the ability to bond to a wide array of substrates. It is applied using a paintbrush, paint roller, or airless paint sprayer. The first coat must be completely dry to the touch before a second coat can be applied. It takes approximately two hours to cure, at a temperature of 70 degrees Fahrenheit.
What is hydro ban?
HYDRO BAN is a single component self-curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. It bonds directly to a wide variety of substrates. Equipped with Microban antimicrobial product protection to fight the growth of stain-causing mold and mildew on the waterproofing membrane.
Where can hydro ban XP be used?
HYDRO BAN XP can be used for waterproofing and crack protection in a variety of interior and exterior spaces in residential, commercial and industrial settings. For use in indoor applications such as: steam showers and steam rooms, bathrooms, kitchens and food processing areas, countertops and facades.
How do I flood test my hydro ban® XP?
† HYDRO BAN® XP can be flood tested in 2 hours when the waterproofing membrane is cured and the substrate is 70°F (21°C) and 50% RH or greater for 2 hours. The 2 hour period starts when the HYDRO BAN XP color has changed from a sage green to a dark olive green color indicating a cured liquid waterproofing membrane.
How many coats of hydro Ban do I Need?
To ensure waterproofing capabilities, you should apply two coats of Hydro Ban. How many coats of RedGard are needed? For best results, apply two coats of RedGard when used around drains, as a crack prevention membrane, and as a general waterproof membrane.
What is a hydroban?
What to do if playback doesn't begin?
How do you use a hydro ban waterproofing membrane?
3:027:27Laticrete Hydro Ban Waterproofing Membrane From Contractors DirectYouTubeStart of suggested clipEnd of suggested clipOnce all voids are treated properly installation of Hydra ban can be applied easily with a paintMoreOnce all voids are treated properly installation of Hydra ban can be applied easily with a paint roller brush v notch trowel or an airless sprayer.
How long does Hydro Ban take to dry?
2 hoursAllow HYDRO BAN a minimum 2 hours cure at 70°F (21°C) prior to flood testing in these conditions. Protect from exposure to traffic or water until fully cured. HYDRO BAN will go from a light sage green to a darker olive green when fully cured. The second coat should not be applied until the first coat is fully cured.
Can you tile directly over hydro ban?
Tile can be installed on HYDRO BAN Sheet Membrane immediately after installation with LATAPOXY 300 Adhesive or any suitable tile installation mortar.
Can you use hydro ban over drywall?
A single 30-pound (13.6 kilogram) bag of Hydro Ban Cementitious Waterproofing Membrane covers 120 square feet at a maximum of 0.004 inch (1 millimeter) thickness when applied using two coats by brush, roller or spray application over interior and exterior concrete and masonry finishes, and over existing tile, drywall, ...
How do you install a hydro ban?
7:3611:37Instructions for LATICRETE HYDRO BAN Shower Pan Kit a ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipBe sure to comb all of the thinset. In the same. Direction install the first length of sheet.MoreBe sure to comb all of the thinset. In the same. Direction install the first length of sheet. Membrane. It may be easiest to unroll it up the wall or in the direction that you combed the thinset.
How long until you can walk on waterproofing?
Full Cure is reached within 3-5 days (depending on temperature and humidity). To ensure the best waterproofing for your builds be sure to fully understand the requirements of the waterproofing system and allocate time based on substrate conditions, and dry and cure times of the selected waterproofing system.
Can you use hydro ban on plywood?
What substrates can LATICRETE 9235 Waterproofing Membrane and LATICRETE Hydro BanTM be directly applied to? Clean, structurally sound concrete, exterior glue plywood (interior only), masonry surfaces, gypsum wallboard (interior only), cement boards and cement plasters.
Do I need to waterproof shower walls before tiling?
You should waterproof all the shower walls before tiling. A tile backer or cement board is typically not waterproof, albeit many are water-resistant. The most effective and reliable solution is a separate waterproofing membrane on primed shower walls before tiling.
How do you waterproof before tiling?
0:563:51How to waterproof a shower before tiling - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe recommend that you apply a slurry consisting of towel floor key and rapid fix. To allow forMoreWe recommend that you apply a slurry consisting of towel floor key and rapid fix. To allow for movement apply a 10 millimeter silicon bead in all internal corners and joints around the floor waist.
Can Hydro ban be painted?
Hydro Ban is a liquid rubber polymer that can be applied in a similar fashion to paint, forming a flexible and seamless waterproofing membrane over the surface.
How long can RedGard be exposed?
If tile is not going to be set immediately after curing, RedGard should be protected from rain, direct sunlight and inclement weather for 72 hours after application. If delays longer than 72 hours are expected, cover with felt paper.
What is liquid waterproofing membrane?
A liquid waterproofing membrane is essential for protecting many building structures. These flexible membranes are hand or spray applied onto surfaces such as balconies, podium decks and green roofs. They are even used to line municipal water tanks to prevent leaks.
Is laticrete waterproof?
LATICRETE® tile waterproofing membrane products provide protection for floors and walls for applications ranging from occasionally wet, to continuous water submersion as in showers or pools.
Can you use hydro ban on plywood?
What substrates can LATICRETE 9235 Waterproofing Membrane and LATICRETE Hydro BanTM be directly applied to? Clean, structurally sound concrete, exterior glue plywood (interior only), masonry surfaces, gypsum wallboard (interior only), cement boards and cement plasters.
Can laticrete be used outdoors?
In particular, the use of tile for outdoor renovations has become increasingly popular thanks to tile's unique visual aesthetic and unwavering versatility. From floors, backsplashes, countertops, pools, patios and more, tile can be installed on a multitude of outdoor surfaces.
What is laticrete used for?
The ultimate, lightweight one-step, polymer fortified, Large and Heavy Tile mortar for interior and exterior installation of ceramic tile, porcelain tile, glass tile, stone, quarry tile, pavers and brick.
What is a hydroban?
Product Information. HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that does not require the use of fabric in the field, coves or corners. HYDRO BAN is a single component self-curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane.
What to do if playback doesn't begin?
If playback doesn't begin shortly, try restarting your device.
How long does it take for a flood to test?
Allow for flood testing in 2 hours at 70°F (21°C) or higher (Refer to cautions section for more information on curing)
Can you add videos to your watch history?
Videos you watch may be added to the TV's watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.
Product Information
HYDRO BAN XP can be used for waterproofing and crack protection in a variety of interior and exterior spaces in residential, commercial and industrial settings. For use in indoor applications such as: steam showers and steam rooms, bathrooms, kitchens and food processing areas, countertops and facades.
How to Use
Learn the proper way to use a wet film gauge when installing liquid waterproofing membranes.
What is Hydro Ban?
Produced by Laticrete, a family-owned, global manufacturer of green flooring and façade materials, Hydro Ban is a thin, crack isolation/ waterproofing membrane that doesn’t necessitate the use of reinforcing fabric. It is a single-component liquid rubber polymer that is self-curing and creates a flexible, seamless waterproof coating.
What is the best foam wallboard for a shower?
One of the most popular brands of foam wallboard used for waterproofing showers is called Kerdi Board. 2. Sheet Membranes. Sheet membranes are a manufactured product, made out of different blends of plastic compounds that are directly attached to the tile backer board and shower surface.
What is a tile backerboard?
1. Foamboards. Foam wallboards, or foamboards, are installed as tile backers for structural stability. Made out of extruded polystyrene foam, they also create a waterproof barrier. It is essentially a waterproofing system and backerboard all in one product.
What type of waterproofing membrane is used for shower floors?
There are four primary types of waterproofing membranes for shower floors, including foam wallboards, sheet membranes, liquid membranes, and foam shower bases. Before we break down Hydro Ban vs. RedGard, let’s take a look at the main waterproofing options. 1. Foamboards.
What is the difference between Hydro Ban and Redgard?
Since both Hydro Ban and RedGard claim to be effective, durable, and easy-to-install liquid waterproofing membranes for showers and other applications, how do you know which product to choose? Upon doing extensive research on both, you’ll find that RedGard is certified for use in steam rooms and also as a vapor barrier, while Hydro Ban is not. Apart from price, this is the major difference between the two products. So, if you’re building a steam room, you’ll want to opt for RedGard over Hydro Ban.
What is the best way to waterproof a shower?
There are a number of different options for waterproofing a shower such as using foamboard, sheet membrane, or liquid membrane. The preferred method varies from professional to professional and homeowner to homeowner, although many find themselves wondering whether Hydro Ban or RedGard is a better liquid membrane.
How many coats of Hydro Ban?
To ensure waterproofing capabilities, you should apply two coats of Hydro Ban.
What is hydro ban?
Hydro Ban is a liquid applied, thin waterproofing anti-fracture membrane that combines optimum performance and unmatched productivity. Hydro Ban is rapid drying allowing for a faster time to tile and flood testing, as well as faster flood testing in cold temperatures and over mortar beds. Hydro Ban does not require the use of fabric in the field, ...
Does Hydro Ban require fabric?
Hydro Ban does not require the use of fabric in the field, coves or corners and bonds directly to metal and plastic plumbing fixtures. Save yourself time and money, and complete your installations faster with greater ease. Product #: 9255-XXXX-2. Packaging Sizes:
Which One to Choose Between Hydro Ban and Hydro Barrier?
It depends on the substrates. If you want to use a waterproofing product for any common substrates and choose a budget-friendly option, Hydro Barrier will be more appropriate.
Recent Posts
link to Premixed Thinset Vs. Mix-It-Yourself For Shower and Bath Walls
What is a hydroban?
Product Information. HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that does not require the use of fabric in the field, coves or corners. HYDRO BAN is a single component self-curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane.
What to do if playback doesn't begin?
If playback doesn't begin shortly, try restarting your device.
