How do you use photo grass weed killer?
- Shake Well
- Check to ensure that the control lever is set to the OFF position.
- Activate the water
- When spraying, aim away from yourself and into the direction of application
- When you are finished, move the control lever to the OFF position to stop.
- Disconnect the Sprayer, and either store it or throw it away according to the instructions
How do I use image herbicide?
If it is in ounces or teaspoons and your sprayer is calibrated in the same measurement, turn the hose-end sprayer's dial on top until the arrow points at that number. Repeat the application in six weeks if you do not get the desired results the first time. Do not use Image herbicide on St. Augustine lawns during the winter months.
How do I use herbicides safely?
Here are some tips to help you use herbicides safely and effectively: Avoid using herbicides on windy days and near bodies of water. Always wear a protective mask, gloves, and long sleeves.
How long does it take for image herbicide to work?
Repeat the application in six weeks if you do not get the desired results the first time. Do not use Image herbicide on St. Augustine lawns during the winter months.
Is image herbicide harmful to humans?
It may cause harm if it splashes up in your eyes, or if you breathe in the fumes. Pour the Image herbicide in your hose end sprayer's plastic container.
How do you mix a photo herbicide?
Mix Image herbicide for use in a small-trigger sprayer. Fill the reservoir with 2 tsp Image Consumer Concentrate per 16 ounces of water. It will take 1 to 5 gallons of this mixture to cover 1,000 square feet. Image is a post-emergent herbicide prescribed for use on a broad range of summer weeds.
How long does it take for image herbicide to work?
Applying IMAGE® Herbicide is easy and requires little cleanup. You can use IMAGE® Kills Nutsedge for spot treatments with a trigger or pump up sprayer or treat large areas with a hose end sprayer. When using IMAGE, you should expect to see weed discoloration in 1 to 2 weeks and dead weeds in 3 to 5 weeks.
How do I use image ready to spray?
IMAGE® All-In-One Weed Killer Ready-to-Spray Application InstructionsShake Well.Make sure control lever is in the OFF position. ... Turn on water.Spray Aim towards direction of application and away from you. ... To stop when finished turn control lever to OFF. ... Disconnect Sprayer and Store / Discard as instructed.
What temperature should I apply image herbicide?
WHERE TO USE: Apply when daytime temperatures are between 50° F and 90° F. (Except on Bermudagrass do not apply when daytime temperatures exceed 85° F.) Kills major broadleaf and troublesome grass weeds including dandelion, chickweed and clover as well as crabgrass and foxtail.
How often can I apply IMAGE?
Each 24 ounce bottle of Image Herbicide will treat approximately 6,000 square feet. Image Herbicide begins to show signs of the weeds dying in 1-2 weeks but can take up to 5 weeks for complete control. Repeat application can be made 6 weeks after initial treatment if necessary.
Can you spray IMAGE on wet grass?
Yes, Image Kills Nutsedge Concentrate can be used in well-established warm-season lawns, turf-grasses, and selected ornamental plants to control poa annua. The mixing rate is 2. 5 fl oz in a gallon of water if you are doing a spot treatment.
Is image safe for centipede grass?
Augstinegrass and Centipedegrass Ready to Spray. IMAGE Southern Lawn Weed Killer for St. Augustinegrass and Centipedegrass Ready-to-Spray contains multiple active ingredients to provide excellent broadleaf weed control in established warm-season and cool-season grasses.
What can I spray on my lawn for weeds?
2:568:59How to spray weeds in the lawn - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe blue one the Bayer all-in-one is really good for crabgrass. And dandelions. And that you'reMoreThe blue one the Bayer all-in-one is really good for crabgrass. And dandelions. And that you're going to do three point two ounces in one gallon of water for spot spraying.
How do you use a yard sprayer?
Position the sprayer nozzle 10 to 12 inches from the weeds and squeeze the trigger to dispense the herbicide. Spray the plant until it is saturated and the solution just begins to drip off. Spray all additional weeds in the same manner until all of the solution is gone.
When should you not spray weeds?
If you decide to apply herbicide 30 minutes or more before the rain, you may want to check the wind conditions too. Avoid spraying weeds if the wind has picked up ahead of a storm, or in any particularly breezy conditions. Wind can cause the herbicide to drift and cause damage to plants you don't plan on killing.
How long does IMAGE stay in the soil?
In fact, the majority of residentially sold weed killers are required by law to break down in the soil within 14 days, if not sooner. Take glyphosate, for example. This post-emergent, non-selective herbicide generally breaks down within days to weeks depending on the specific product you have.
Can I spray weeds after it rains?
For many herbicides, any amount of rainfall soon after spraying has the potential to reduce absorption, translocation, and subsequent weed control. If you apply herbicide and it rains before it's rainfast, herbicide performance will be reduced.