Instructions:
- Loosen and remove the bolts on the trimmer head.
- Remove the worn blades.
- Add grease around the bolts.
- Insert the replacement STIHL PolyCut™ blades into the head.
- Insert and tighten the bolts to hold the blades firmly in place.
- Repeat the same process for the additional blades.
- Check to ensure that the blades can move without any resistance.
Full Answer
Getting Started with Your STIHL Trimmer
As you use your STIHL trimmer through the years, you will need to swap out trimmer heads and blades from time to time. Before getting started with a replacement, make sure you read through the instruction manual that came with your trimmer.
Instructions
Attach the AutoCut® C 5-2 trimmer head and screw in a clockwise direction for a couple turns.
Instructions
Ensure the FSA 56 unit is powered off and that the battery is removed.
How to remove a mowing head from a lawn mower?
First press one side inward until the catch disengages, then press the other side. Then remove the cover of the mowing head. Step 2 of 7: Removing the spool. Twist the spool slightly so that the plastic hook is exposed and then remove it from the top casing. Step 3 of 7: Rewinding the line.
How does an auto cut mowing head work?
The AutoCut mowing head has a line storage device and the line is fed while the machine is running. This is done by tapping the top of the mowing head on the ground. This opens the holding mechanism for the line and centrifugal force causes line to be fed out.
How to wind a spool?
Insert the end of one line in one of the eyes of the spool and wind on the line according to the indicated direction of winding. Please make certain that the line is wound on evenly and tightly. Insert the end of the line in one of the openings on the spool. Step 4 of 7: Winding on the second line. Now fill the second chamber by repeating step 3.
What is a bump feed trimmer?
A bump feed trimmer is a type of string trimmer that uses a spool of line that is fed through the head of the trimmer. The line is advanced by running the head of the trimmer along the ground, which causes it to spin. As the line wears down, more line is fed out from the spool automatically.
What are the benefits of using a bump feed trimmer?
There are several benefits of using a bump feed trimmer as opposed to other types of trimmers. First, it is much easier to use since you don’t have to stop and manually feed the line. Second, it is more efficient since the line is automatically fed when needed. Third, it eliminates the need for a spool which can be messy and difficult to deal with.
How to use a bump feed trimmer?
If you’re looking to get a neat and tidy lawn, then you need to invest in a good quality bump feed trimmer. But once you’ve got your hands on one, how do you use it?
What are some common uses for a bump feed trimmer?
A bump feed trimmer is a type of string trimmer that uses a spool of line that is fed through the head of the trimmer. The line is then fed through the cutting head and cut by the blades as it spins.
How does a bump feed work?
A bump feed works by feeding the trimmer line out when the head is struck on the ground. To use a bump feed, hold the trimmer so that the cutting head is at a right angle to the ground and strike it lightly on the ground. The trimmer line will advance a short distance with each strike.
How to properly maintain a bump feed trimmer?
A bump feed trimmer is a great tool to have for keeping your lawn looking neat and tidy. However, like all tools, it needs to be properly maintained in order to function properly. Here are some tips on how to properly maintain your bump feed trimmer:
What are some safety tips to keep in mind when using a bump feed trimmer?
When using a bump feed trimmer, always be aware of your surroundings and take precautions to avoid injury. Always wear appropriate safety gear, including gloves, eye protection, and earplugs or headphones. Be sure to keep the area around you clear of obstacles so you can work safely and efficiently.
