How to Use:
- Before inserting the appropriate Westland lawn product, always set the adjustable lever to zero
- Do not fill the spreader on the lawn. ...
- Set calibration lever on top of the hopper to appropriate setting to start applying the product. ...
- It is recommended to treat 2/3 stripes of lawn alongside fences and hedges to avoid having to make difficult manoeuvres along these perimeters. ...
How to use a lawn mower spreader?
Firstly, measure the area to treat and also weigh out correct amount of product. Secondly, set aperture to 0 and fill on a level surface – not on a lawn or cultivated area. Select the appropriate setting on your spreader and then evenly spread over whole measured area. Finally, continuously turn handle and walk at a normal pace.
Can I apply Westland lawn care products with a lawn spreader?
It can be quite confusing to know what settings to use on your type of lawn spreader, never mind using it with various different products. Use the following table to apply Westland Lawn Care Products with a lawn spreader. This guide will tell you which settings to use to apply at the correct rate.
What is a lawn drop spreader used for?
This Lawn Drop Spreader is great for the easy and accurate application of our Westland lawn treatment products as well as grass seed. The product also has a simple to use calibration setting for your different spreading requirements. Do not fill the spreader on the lawn.
How do I use a spreader Hopper?
Firstly work out the area in m2 that you want to cover. Secondly weigh out a known amount of product recommended to treat that area and put it into the spreader hopper. In order to avoid any accidental damage to your lawn, first use the spreader to cover one square metre on a large sheet of plastic.
What setting should I use on my spreader?
Place your spreader setting on a low setting (usually one-fourth of the spreader setting range or less). Spread the material over a 50 x 20-foot area (1,000 square feet). If there is material left over, increase your setting. If you come up short, decrease your setting.
What do the settings on a spreader mean?
A spreader setting is the rate in which you apply product to your lawn. Each Jonathan Green product has recommended rates of application and coverage based on bag size.
How do you apply grass seed to a spreader?
0:542:00How to Overseed Your Lawn - Ace Hardware - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext adjust your spreader setting according to the instructions on the bag. Apply the seed.MoreNext adjust your spreader setting according to the instructions on the bag. Apply the seed.
What setting do you put spreader on grass?
When using a handheld broadcast spreader, choose a setting of 4 when overseeding or planting a bare lawn, although two perpendicular passes will produce the best results for new lawns. For drop spreaders, use a setting of 9 3/4 for overseeding and a bare lawn setting of 14.
What do the numbers on my fertilizer spreader mean?
Understanding the Fertilizer Label The first number is the amount of nitrogen (N), the second number is the amount of phosphate (P2O5) and the third number is the amount of potash (K2O).
What setting do you put grass seed on?
Agway recommends a setting of 15 for overseeding and 18 for a new lawn when using either their rotary spreader or an Earthway rotary spreader. With an Agway drop spreader, use a setting of 18 for overseeding and 22 for new seeding.
Can I just throw grass seed down on existing lawn?
Can you just sprinkle grass seed on top of your existing lawn? While it's possible to simply sow the new grass seed over your existing lawn, taking the time to prepare your lawn beforehand will increase the likelihood of seed germination and improve your end result.
How thick should you spread grass seed?
No matter what you choose to use to cover grass seed, more is definitely not better. One-quarter of an inch is about as thick as you should go.
What comes first fertilizer or grass seed?
You can plant grass seed immediately after applying fertilizer. Please make sure there is no weed preventer in the fertilizer, as this will also prevent the grass seed from germinating.
How many pounds of seed do I need for a new lawn?
For the best results, calculate your grass seed needs by type of seed and square footage. Otherwise, a general rule of thumb is 3-4 pounds of grass seed per 1,000 square feet for new lawns and 1-2 pounds of grass seed per 1,000 square feet for overseeding.
Do you need to use a grass seed spreader?
Do You Need a Spreader? If you're going to spread fertilizer on your lawn then you really shouldn't do it without a spreader. There are two types of spreaders: broadcast and drop. Drop spreaders are for more targeted applications, while broadcast spreaders are good for covering a large area quickly.
What number do I set my Scotts broadcast spreader to?
After choosing the best broadcast spreader for your yard, locate the orange dial on the spreader and turn it to the setting indicated on the seed or fertilizer bag. Turn clockwise for a higher setting of 12 or 14, which is for larger granules or grass seed, or counterclockwise to reach a lower setting of three or five.
What setting do you put Scotts spreader on for fertilizer?
After choosing the best broadcast spreader for your yard, locate the orange dial on the spreader and turn it to the setting indicated on the seed or fertilizer bag. Turn clockwise for a higher setting of 12 or 14, which is for larger granules or grass seed, or counterclockwise to reach a lower setting of three or five.
What setting should I use on my Scotts spreader for grass seed?
Since settings will vary based on seed, it's essential to verify this. For example, according to Scotts, the Scotts broadcast spreader settings for ryegrass seed should be set at setting 15 for new lawns and setting 5 for reseeding. Fertilizers will require a different setting as well.
Are Scotts spreader settings lbs per 1000 sq ft?
per 5000 sq. ft. or 8 lbs per 1000 sq ft.
What setting is Scotts drop spreader?
0:352:01How to Calibrate Your Scotts® Drop Spreader - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo it is necessary to calibrate your spreader before the first use and check it again every springMoreSo it is necessary to calibrate your spreader before the first use and check it again every spring or it may spread too much or too little product. The first step is to set the micrometer. The number
Westland Spreader Settings
Westland spreaders, as with most durable spreaders out there is easy to calibrate. It’s always recommended to start with a tighter calibration, using no more than ¼ of the entire yard for your testing, and proceeding to work on the entire lawn when you get a reasonable calibration.
How to Know when to Apply Fertilizers to Your Lawn
Take a sample of your grass for testing to determine if it’s a warm-season or cool-season plant. Ideally, you want to add fertilizers to warm-season grass twice every spring and fall. Applications (for both spring and fall) should be at 30-days intervals, and the first application should ensue when new growth begins.
What is a lawn spreader?from gustafsgreenery.com
A lawn spreader is an essential piece of gardening equipment you need if your lawn is in need of work. It can make your life much easier by giving you a convenient way to spread fertilizer or plant seeds, and there are various types to choose from. What are the main types of lawn spreaders?
How to attach a spreader to a tractor?from gustafsgreenery.com
To attach the spreader to your tractor or rider, you need to insert a hitch pin into the hole of the bracket.
What About A Behind Tow Spreader?from gustafsgreenery.com
A behind tow spreader basically means that the spreader is attached to the back of a rider or tractor.
How does a fertilizer spreader work?from greeneryguide.com
This spreader works by pushing the fertilizer out through a gap that is at the bottom of the hopper to the ground that is directly below , which is why its name is drop fertilizer spreader.
How does a broadcast lawn spreader work?from gustafsgreenery.com
How they work is that they have a rotating device placed underneath their container, or hopper as it’s called, and then the fertilizer or seeds get released in a fanlike way over the lawn.
What are the different types of lawn spreaders?from gustafsgreenery.com
There are two main types of lawn spreaders. These are broadcast spreaders and drop spreaders. They both have pros and cons to consider. With that in mind, let’s take a look at how to use a lawn spreader the correct way, depending on the type of spreader that you are interested in purchasing for your lawn.
How many types of fertilizer spreaders are there?from greeneryguide.com
There are three basic types of fertilizer spreader. You can choose any one of these depending on your garden’s specific needs. Each of them comes with their own set of advantages. We will talk about each of these fertilizer spreaders and how to use them.
What is a lawn spreader?
A lawn spreader is an essential piece of gardening equipment you need if your lawn is in need of work. It can make your life much easier by giving you a convenient way to spread fertilizer or plant seeds, and there are various types to choose from. What are the main types of lawn spreaders?
How to attach a spreader to a tractor?
To attach the spreader to your tractor or rider, you need to insert a hitch pin into the hole of the bracket.
What About A Behind Tow Spreader?
A behind tow spreader basically means that the spreader is attached to the back of a rider or tractor.
How does a broadcast lawn spreader work?
How they work is that they have a rotating device placed underneath their container, or hopper as it’s called, and then the fertilizer or seeds get released in a fanlike way over the lawn.
What are the different types of lawn spreaders?
There are two main types of lawn spreaders. These are broadcast spreaders and drop spreaders. They both have pros and cons to consider. With that in mind, let’s take a look at how to use a lawn spreader the correct way, depending on the type of spreader that you are interested in purchasing for your lawn.
How to choose a pattern for a hopper?
To choose and set a pattern, you first want to check that how the product is being released from the hopper is suitable. So, check that the flow lever is closed, then fill up your hopper, open the flow lever and then push the spreader for three paces of your normal walking speed, if it’s a spreader that you will use by pushing in front of you.
What to do before buying fertilizer?
Before you purchase a fertilizer for your lawn, make sure you have your soil tested. It might actually have too much of certain nutrients and not be in need of more, so you want to avoid giving it more. You should also test the soil pH.
What can affect the flow rate of a spreader?
All settings are for guidance only. Variations in product density and granule size can affect flow rate. Wear and tear can affect the performance of the individual spreader
How to apply a sandblaster?
Measure area to treat and weigh out correct amount of product. Set aperture to 0 and fill on a level surface – not on a lawn or cultivated area. Select appropriate setting on spreader and evenly spread over whole measured area. Continuously turn handle and walk at a normal pace. Application rate can vary depending on walking speed and handle turning speed. To increase application overlap more frequently.
What is a Hand Spreader?
Hand spreading seeds or fertilizer without some type of tool isn’t recommended. You won’t be able to space the material very well, which means you’ll end up with clumps of seeds and fertilizer as well as bare patches.
What is the best spreader for a driveway?
A hand spreader is the easiest of all types of spreaders to use. Compared to a drop or broadcast spreader that you push across the yard, a handheld type is lightweight, inexpensive, and simple to use. It’s best for smaller spaces and smaller budgets. You can even use it for distributing salt on your driveway or walkways in the winter.
How to stop a fertilizer spreader from spinning?
If you need to stop walking, simply stop cranking or stop the motor from spinning. Clean and dry the spreader after each use. Printer Friendly Version.
Can you use a hand spreader to spread fertilizer?
Using a hand spreader isn’t difficult. If you can walk the entirety of your yard, you can easily use this device to disperse seeds or fertilizer. First, make sure you read the instructions for using your particular model. In general, though, you can follow these steps and tips:
