WhirleyPop™ Popcorn Popper - Instructions
- Seasoning Instructions: First Time Use. Add 1 tablespoon of vegetable oil. Tilt the pan to coat the bottom and sides of...
- Popping Instructions. Use the proper amounts of oil and popcorn. As you become more comfortable with your popper, you...
- Stove Instructions. Place popper with added ingredients on gas stove and turn on the...
How to make the perfect popcorn?
Method
- Heat the oil in a 3-quart saucepan on medium high heat. If you are using coconut oil, allow all of the solid oil to melt.
- Put 3 or 4 popcorn kernels into the oil and cover the pan.
- When the kernels pop, add the rest of the 1/3 cup of popcorn kernels in an even layer. ...
- Return the pan to the heat. ...
How to pop really fluffy popcorn?
- Add a little extra moisture: add 1 teaspoon of water for 1 pound of popcorn will make popcorn fluffier puffs.
- The easiest way is shaking it up 2-3 times a day for three days
- Reheating the leftover popcorn: simply spread a baking sheet in an oven, leave it for 2 minutes and take it out. You will get crispy popcorn again.
Can you pop popcorn without a microwave?
You’ve got delicious popcorn without a microwave! Some electric popcorn makers are air poppers and allow you to pop your popcorn kernels without using oil. If you’re health conscious or want to cut down on your fat and oil intake, this is a terrific alternative to microwave popcorn. 3. Use a Grill. Did you know you can pop popcorn on a grill or campfire? Here’s what you need: An aluminum pie pan
What are two different ways to pop popcorn?
- Heat a large pot over medium to high heat on your stove. ...
- To check for the temperature, place 2 to 3 kernels in the hot oil and put a lid on the pot. ...
- Carefully remove the popped kernels and add the remaining kernels. ...
- Continue to gently give the pot a few shakes every so often as the popcorn starts popping. ...
- Listen to the popping. ...
See more
How do you use a whirley popcorn popper?
First time use. Season the pan.Prep. Add 1/2 Cup Popping Corn and 1-3 T Popping Oil into the Whirley Pop.Ready to pop. Heat Whirley Pop on stove set to Medium - Medium High.Time to crank. ... Enjoy!
How much oil and popcorn do you use in a Whirley Pop?
Add about 2.2 Tablespoons of popcorn oil to the pot, warm up and then add 1/2 Cup of popcorn along with a pinch of Flavacol salt. In 2 to 4 minutes there will be 6 quarts of delicious lip smacking popcorn to enjoy.
Do you have to use oil in Whirley Pop?
Once your Whirley Pop is nice and clean, it's ready to be seasoned. Seasoning your Whirley Pop is easy and doesn't have to be done very often at all. When you season your Whirley Pop, you a creating non-stick coating of oil in the bottom of the pot which will prevent popcorn from sticking and make cleanup much easier.
How much popcorn and oil do I use in a popcorn machine?
What size Popcorn Machine do I need?Popcorn Popper SizeOilSnappy Popcorn4 oz. Popper1/4 Cup Oil1/2 Cup Corn6 oz. Popper1/4 Cup Oil3/4 Cup Corn8 oz. Popper1/3 Cup Oil1 Cup Corn12 oz. Popper1/2 Cup Oil1 1/2 Cups Corn1 more row
How much butter goes in a Whirley Pop?
4 tablespoonsWhen we make popcorn with the Whirley Pop, we do a full batch with 1/2 cup of kernels and 1 tablespoon of canola oil, topping with 4 tablespoons of melted butter when done, along with a sprinkle of coarse salt. Buttery and delicious!
How many cups of popcorn does a Whirley Pop make?
Plenty of Popcorn 6-quart capacity makes about 24 cups of popped popcorn. Partial batch instructions also included.
What is the best oil for popping popcorn?
The best cooking oil for popcorn has a high smoking point, and canola oil is the most excellent option if you seek to make a healthy snack. Canola oil, unlike other oils, are high in omega-3 fatty acids and vegan friendly.
Can you pop popcorn in butter instead of oil?
Fortunately, there is an easy way to get around the problem and succeed in popping popcorn with butter instead of oil – simply use clarified butter, or ghee, which can withstand higher temperatures and still give your popcorn the buttery flavor you seek.
How much oil do you put in popcorn?
You only need 2 tablespoons of oil per half cup of kernels, so this popcorn won't taste greasy!
How much oil do I need for 8 oz of popcorn?
1/3 cupFor an 8-ounce popcorn machine, you'll use 1/3 cup of oil.
Is peanut oil good for popping popcorn?
Peanut Oil For those who are not allergic to nuts and enjoy the taste of peanuts, peanut oil is an excellent option for making popcorn packed with flavor.
How do you make popcorn taste like movie theater?
The most authentic way to cook popcorn that tastes like movie theater popcorn is to use Flavacol as a seasoning added to the coconut oil and the kernels. Flavacol gives popcorn a yellow tint. The theaters top the popcorn with butter-flavored oil which has less water so the popcorn is not soggy.
What is the best oil for popping popcorn?
The best cooking oil for popcorn has a high smoking point, and canola oil is the most excellent option if you seek to make a healthy snack. Canola oil, unlike other oils, are high in omega-3 fatty acids and vegan friendly.
What kind of oil should I use for popcorn?
Walnut, avocado or extra virgin olive oils are best when making popcorn on the stovetop. Canola oil is the next best option. Flaxseed and wheat germ oil shouldn't be heated, so they don't really work for popping popcorn.
Can you add salt to Whirley Pop?
Ingredients. Pour oil into the Whirley Pop, then add popcorn, followed by salt. Place Whirley Pop on stove and set heat to Medium-Medium High. Hold the wooden handle with one hand, and slowly turn the crank with the other.
How do you make popcorn taste like movie theater?
The most authentic way to cook popcorn that tastes like movie theater popcorn is to use Flavacol as a seasoning added to the coconut oil and the kernels. Flavacol gives popcorn a yellow tint. The theaters top the popcorn with butter-flavored oil which has less water so the popcorn is not soggy.
What is a Whirley pop?
If you’ve already got a Whirley Pop in your kitchen, this information should help you get the most out of it and pop the most delicious popcorn for years to come! Let’s start at the beginning… your Whirley Pop is either an aluminum or stainless steel pot with either nylon or metal gears.
How long does it take for a Whirley pop to cool down?
Once the oil is nice and hot, turn off the element and remove the Whirley Pop. Set it aside to cool down on its own – 15 – 30 minutes.
How to get popcorn to die off?
Have your bowl ready, and when the popping really starts to die off, turn off your heat and immediately remove the Whirley Pop from the element . Don’t hesitate! Turn the Whirley Pop over and pour all that popcorn into your bowl. As the popcorn chef, you’re entitled to try some hot popcorn before anyone else does.
How long is the warranty on a Whirley Pop?
There is a 25-year warranty on the mechanical parts of the lid provided by the manufacturer, Wabash Valley Farms. Should anything on the lid break, chances are it will be covered by the warranty. It’s strongly recommended that you register the purchase of your Whirley Pop. Just go to this link and enter your information.
How much heat do you need to heat up a Whirley pop?
You don’t need the heat to be very high – my recommendation is 70-75% of maximum. Give it a couple of minutes to really heat up and then put in your oil, kernels, and optionally, seasoning salt. Because you’ve seasoned your Whirley Pop, the oil you use is pretty much all about adding flavour.
What oil to use for popping oil?
Recommended oils are our Classic Blend Popping Oil (a blend of coconut and canola oils), peanut, corn, canola, or even Green Tea oil. Not recommended is butter or olive oil. These will smoke and burn even at medium temperatures, and you will be disappointed. After your oil goes in, add ½ cup of kernels.
Can you season a Whirley Pop?
Seasoning your Whirley Pop is easy and doesn’t have to be done very often at all. When you season your Whirley Pop, you a creating non-stick coating of oil in the bottom of the pot which will prevent popcorn from sticking and make cleanup much easier.
How to season a Whirley Pop?
To season your Whirley Pop, simply pour in about a tablespoon of vegetable oil and swirl it around until the entire interior surface is coated. Heat the Whirley Pop on a burner over medium heat for about a minute, rotating it slightly to make sure the hot oil is distributed evenly.
What is a Whirley pop pot?
A Whirley Pop pot is a tool that allows you to pop a fresh batch of corn in just a few minutes using the oil of your choosing instead of the congealed fake butter used in microwavable popcorn bags. Following the Whirley Pop directions is easy enough for a kid, but this is a project that is best handled by an adult. Advertisement.
How much oil should I use for a Whirley Pop?
Whirley Pop Directions. The basic Whirley Pop recipe is hard to mess up. The company suggests putting 1/2 cup of popcorn kernels and 1 to 3 tablespoons of oil in the pot. How much oil you choose to use depends on how calorie-conscious you're being and how much oil flavor you want to detect.
How long does it take for a sourdough kernel to pop?
Gently turn the pot's crank the entire time it's on the stove. You should start to hear the kernels pop within a few minutes.
What to do with buttered popcorn?
To please a sweeter palette, toss buttered popcorn with a mixture of cinnamon and sugar. If you're not afraid to get your hands dirty, stir in mini chocolate or caramel chips while the popcorn is still hot so they melt. Add chopped salted peanuts for crunch. Advertisement.
Can you use a Whirley Pop over a campfire?
Also, if you're new to following Whirley Pop instructions, it's important to know that the company makes different models for home use and for outdoor use. Don't attempt to use an indoor Whirley Pop over a campfire or other open fire.
Can you use coconut oil for popcorn?
Coconut and canola oils are both appropriate for making popcorn but don't use olive oil, which burns quickly. From here, the Whirley Pop instructions take no more than five minutes to complete. Once the kernels and oil are in the pot, place the Whirley Pop on a stove burner. Turn it to medium or medium-high heat.
How to heat a popper on a gas stove?
Stove Instructions. Do not preheat popper and oil. Place popper with added ingredients on gas stove and turn on the burner. Medium heat is best. If using electric range, heat range only to medium-high; place popper with added ingredients on heated unit.
How much oil should I use for popcorn?
Use the proper amounts of oil and popcorn. For Oil use 1-3 Tablespoon. Some gourmet hybrid popcorn such as white, crimson or petite pop-up smaller and should be adjusted accordingly. As you become more comfortable with your popper, you can reduce the amount of oil used to as low as a single teaspoon.
How Did The Whirley Pop Get Its Start?
It all began in a place called Wabash Valley Farms, which resides in the heartland of Indiana farm country. Mike Williams was a farmer in Indiana during the 1950s. He actually acquired the farm in 1974 and even started to grow popcorn for Orville Redenbacher.
How Do You Make Popcorn With A Whirley Pop?
One of the easiest (and most important steps) for making popcorn in Whirley Pop is getting your pan ready. To prepare your pan, all you need is a tablespoon of vegetable oil. Then, gently swirl it around the base of the pan.
What Are The Different Types Of Whirley Pops Available To Buy?
Ever since the invention of the Whirley Pop, it has evolved over the years for better efficiency and producing perfect popcorn. Below are some of the most common types of Whirley Pops available for purchase.
What Are Some Different Seasonings or Flavorings To Use?
It’s still delicious even if you don’t add anything besides a bit of salt to your popcorn from a Whirley pop. However, it’s still relatively easy to play around with an array of flavors. Some ideas include pouring over melted butter or adding spices like onion powder or white cheddar seasoning.
