With Aquabot Junior you’ll save up to 50% of your total maintenance bills, including energy, chemicals, and water usage. Just plug it in and turn it on; no hoses, booster pumps, or pool filter connections needed. The Aquabot Junior also features:
How do you use an Aquabot?
3:187:53Aquabot Pool Cleaner Quickstart Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd drape into the pool cable. So it'll be adequate cable length to cover the entire pool. Next takeMoreAnd drape into the pool cable. So it'll be adequate cable length to cover the entire pool. Next take the thin floating cable to the power supply. Plug it in simply press a button and begin cleaning.
Why is my Aquabot Jr not moving?
a) Check to make sure that no debris is caught on the drive belt or the drive tracks. b) Check to make sure drive belts are not worn or broken on your Aquabot Machine. Also, be sure belts are tight. c) Check to be sure the larger drive tracks are not loose or in the wrong place.
How do you use a rover Jr pool?
1:046:43Aquabot Pool Rover Junior Review – Right Price for the Right ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's a simple plug and play design just plug the power supply into an outdoor outlet plug theMoreIt's a simple plug and play design just plug the power supply into an outdoor outlet plug the floating cable into the power supply. And drop the unit into your pool.
How do I turn on my Aquabot?
Check that the Power Supply button is pressed upwards to the “ON” position. Note: Some models have a Reset (Safety) Switch, which must be pressed each time you press the “ON” button. Switch the Power Supply “Off” and “On” several times, allowing approximately 30 seconds between each“ON” and “OFF”.
Why does my Aquabot keep stopping?
replace the pump. AQUABOT STOPS RUNNING AFTER SHORT TIME It may run for a short period after turning power off and on. The most likely problem is the timer on or in the power supply. To check, when the robot stops, unplug the robot from the transformer and check for voltage at the power transformer outlet.
How do you clean Aquabot filter bag?
0:013:27Aquabot Junior How to clean the filter bag - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd remove this bag look the bottom lid assembly over like this so that we don't get all the debrisMoreAnd remove this bag look the bottom lid assembly over like this so that we don't get all the debris all over the place. And gently remove the bag.
How does the Pool Rover work?
They connect to the pool skimmer or a dedicated suction line and work around the pool collecting debris and sending it out through the pool's filtration system. The cleaner is propelled around the pool by the movement of the water being sucked through it once the hose is connected and the filter pump is running.
What does a Pool Rover do?
The Pool Rover is pre-programmed to clean ALL of your pool spotlessly clean. Works on all above-ground pools: round, oval or rectangle. Since the Pool Rover has its own filtration system, it will remove algae and bacteria as well as dirt, debris and sand.
How do I clean my pool vacuum bag?
0:103:48Aquabot Fury - How to Clean the Filter Bag - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo these so you take it off is to hold it in the upside down position and just start to sit downMoreSo these so you take it off is to hold it in the upside down position and just start to sit down then built the bag off the cage. This is what every won't get any debris all over test.
How do you turn on a pool cleaner robot?
0:472:10How to Use Your Robotic Pool Cleaner - YouTubeYouTubeStart of suggested clipEnd of suggested clipKeeping it vertical to remove any trapped air inside. Then select your cleaning cycle. And pressMoreKeeping it vertical to remove any trapped air inside. Then select your cleaning cycle. And press Start it's that simple it's important to spread out the floating cable over the pool ensuring.
Does Aquabot Junior have a vacuum?
The Aquabot Junior ABJR and Junior NXT robotic pool cleaners do not have any vacuum hoses to worry about. Their cleaning power is not dependent on the pool pump or pool filter. They have their own internal pump motor, drive motor and filter bag system.
Does the Aquabot Junior have a programmable timer?
No, it does not have a power supply with a timer that is capable of being programmed. It only has a 4-hour cleaning cycle or continuous run mode. The NXT model seems to have a 2-hour cleaning cycle.
Does the Aquabot Junior scrub the pool surfaces?
Yes, it has two scrubbing brushes on the front and rear for scrubbing pool surfaces. The brushes clean most types of pool surfaces, including vinyl liners.
Can the Aquabot Junior be used for above ground pools?
No, the Aquabot Junior ABJR is made for cleaning inground swimming pools only. It will not work in above ground pools.
Can children play with cleaner?from zodiacpoolsystems.com
Do not let children play with cleaner.
Can flow keeper valves be used in single skimmer?from zodiacpoolsystems.com
The FlowKeeper™ valve must always be usedin single skimmer
How to clean a syringe pump?from i-love-my-aquabot-automatic-pool-cleaner.com
1) Check impeller for debris such as hair, weeds or leaves. 2) Operate the robot without the filter bag, if the pump works ok, get a new bag or clean the one you have. 3) Troubleshoot your cable. Check for broken wires between the pump and motor.
Does Aquabot require a multimeter?from i-love-my-aquabot-automatic-pool-cleaner.com
With the exception of learning several easy diagnostic tests performed with a multimeter, Aquabot troubleshooting does not require any special mechanical skill.
